diff mbox

[3/3] arm64: dts: exynos: Add support for S6E3HA2 edge panel device on TM2e board

Message ID 1492147179-7824-4-git-send-email-hoegeun.kwon@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hoegeun Kwon April 14, 2017, 5:19 a.m. UTC
This patch add the panel device tree node for S6E3HA2 edge display
controller to TM2e dts.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Krzysztof Kozlowski April 14, 2017, 9:03 a.m. UTC | #1
On Fri, Apr 14, 2017 at 02:19:39PM +0900, Hoegeun Kwon wrote:
> This patch add the panel device tree node for S6E3HA2 edge display
> controller to TM2e dts.
> 
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

Looks good to me but I see that bindings are discussed still. I'll take
this when they settle.

Best regards,
Krzysztof
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 694717a..79f22f7 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -52,6 +52,18 @@ 
 	assigned-clock-rates = <278000000>, <400000000>;
 };
 
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3ha2-e";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &ldo31_reg {
 	regulator-name = "TSP_VDD_1.8V_AP";
 	regulator-min-microvolt = <1800000>;