| Message ID | 1493085261-3488-1-git-send-email-hoegeun.kwon@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2017년 04월 25일 10:54에 Hoegeun Kwon 이(가) 쓴 글: > The decon uses HW-TRIGGER, so TE interrupt is not necessary. > Therefore, remove the te-gpios property in the TM2 dts. > > Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > index 3ff9527..23191eb 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -60,7 +60,6 @@ > vci-supply = <&ldo28_reg>; > reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; > enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; > - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; Reviewed-by: Inki Dae <inki.dae@samsung.com> Thanks, Inki Dae > }; > }; > >
On Tue, Apr 25, 2017 at 3:54 AM, Hoegeun Kwon <hoegeun.kwon@samsung.com> wrote: > The decon uses HW-TRIGGER, so TE interrupt is not necessary. > Therefore, remove the te-gpios property in the TM2 dts. > > Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 - > 1 file changed, 1 deletion(-) > Looks correct. It is too late for me for v4.12 so I will pick it up for v4.13. For my reference: Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
On Tue, Apr 25, 2017 at 10:54:21AM +0900, Hoegeun Kwon wrote: > The decon uses HW-TRIGGER, so TE interrupt is not necessary. > Therefore, remove the te-gpios property in the TM2 dts. > > Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 - > 1 file changed, 1 deletion(-) > Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 3ff9527..23191eb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -60,7 +60,6 @@ vci-supply = <&ldo28_reg>; reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; }; };
The decon uses HW-TRIGGER, so TE interrupt is not necessary. Therefore, remove the te-gpios property in the TM2 dts. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 - 1 file changed, 1 deletion(-)