From patchwork Mon May 29 19:30:28 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 9753551 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 9BFB760249 for ; Mon, 29 May 2017 19:32:19 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7629E26E47 for ; Mon, 29 May 2017 19:32:19 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 6AB5D27E71; Mon, 29 May 2017 19:32:19 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.4 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,RCVD_IN_SORBS_SPAM autolearn=no version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [65.50.211.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id D8C0B26E47 for ; Mon, 29 May 2017 19:32:17 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=z4H3d4VZiTdaKKiWW2wm+fkdsf8okDG+H8ev6uy2knY=; b=MT2WmW3aL7qPSUvjVNypVZ9Aqz 7tarVg4/rgQ9+VTH9fGHPErnVPvqkUEeeU+fVQJ4Se6IxghEYYiVne4/oHwLVZr9crV0uvy0njBkM Nt1QsXV5BbLouYx8cjzRUWJTBtixhsCAY8/R/uaj54bWEzgXutSf2uGsXN91Mqvnaws8AuBoCdBkS VfclzTrYOPorIW4vdT51fUBJ4WUEYuGNcEkpljquz1YY3AYhz1SYqqHlwFgI2Nj4xfxpjawTg5o51 svoQ6wygcWyPYeJuMEZVMzP/Kk1msTJqZSPZH87eHKATzJE/oPqgJVOOhTGtCC0MB3Qs8E0vyla6o bEZ6RjQw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.87 #1 (Red Hat Linux)) id 1dFQOm-00021l-7R; Mon, 29 May 2017 19:32:16 +0000 Received: from mail-qk0-f196.google.com ([209.85.220.196]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dFQOJ-0001Ur-Sj for linux-arm-kernel@lists.infradead.org; Mon, 29 May 2017 19:31:53 +0000 Received: by mail-qk0-f196.google.com with SMTP id o85so9723256qkh.0 for ; Mon, 29 May 2017 12:31:27 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=hNke+vmmb9haaCYgIQx4Ygm9bgJ9v3iitwwLZEZIYFI=; b=D1/ctpLbPvdGVPOgdv5itXCBZNSiGmka2ZEiAtnhU24T3xqHk+Mc0HGwlf8ZSo+b9e DCn1VA/0zpPGn3/KEfYPYS159OVcR30uDnLPozmieaVSU3k0LYb7EO1v1ls5sKkMxr5q zY2FtqXkOY0c8TbmF2qwCtidWRqaIWG54U2L4S+62AQLpLJeVEUJAbLA+9h5huwyls+T lIgyz4/el+NPTPQkwMs6y14Ge5QD3oBS2wx4220fG5LWEXry7GFcMjT7jCjk82z33e54 yrFL6ssV1Y9qJfLx4Sv+5SZh2oqxlLvuuKp6RYfEMTU/DyPX8XOhWn/rusxraZ4oEkvw EPDQ== X-Gm-Message-State: AODbwcC1ee7ULP8/jO8Ku50OjKVgjEUpglkBF3Aqy4aFwEchb8GIuO9Z YK7CGaizphBPOA== X-Received: by 10.55.21.230 with SMTP id 99mr12473673qkv.212.1496086286430; Mon, 29 May 2017 12:31:26 -0700 (PDT) Received: from localhost.localdomain (micene.amarulasolutions.com. [138.201.192.134]) by smtp.gmail.com with ESMTPSA id a45sm6854420qta.39.2017.05.29.12.31.23 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 29 May 2017 12:31:25 -0700 (PDT) From: Jagan Teki To: Maxime Ripard Subject: [PATCH 3/3] ARM: dts: sun6i-a31s: Rename sun6i-a31s-sinovoip-bpi-m2 Date: Mon, 29 May 2017 19:30:28 +0000 Message-Id: <1496086228-2806-3-git-send-email-jagan@openedev.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1496086228-2806-1-git-send-email-jagan@openedev.com> References: <1496086228-2806-1-git-send-email-jagan@openedev.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20170529_123148_365880_D973F3BB X-CRM114-Status: GOOD ( 19.89 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , devicetree@vger.kernel.org, Catalin Marinas , linux-sunxi@googlegroups.com, Sean Wang , Will Deacon , linux-kernel@vger.kernel.org, Chen-Yu Tsai , Rob Herring , Jagan Teki , Michael Trimarchi , linux-arm-kernel@lists.infradead.org, Icenowy Zheng MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP From: Jagan Teki Since Bananapi brand is owned by BIPAI KEJI(BPI), the previous Sinovoip no longer use the bananapi brand, hence rename sun6i-a31s-sinovoip-bpi-m2.dts to sun6i-a31s-bananapi-m2.dts Signed-off-by: Jagan Teki --- Note: Bananapi BPI product site http://www.banana-pi.org/product.html arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/sun6i-a31s-bananapi-m2.dts | 244 +++++++++++++++++++++++ arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 244 ----------------------- 3 files changed, 245 insertions(+), 245 deletions(-) create mode 100644 arch/arm/boot/dts/sun6i-a31s-bananapi-m2.dts delete mode 100644 arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1b086f0..e588721 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -848,7 +848,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31s-inet-q972.dtb \ sun6i-a31s-primo81.dtb \ sun6i-a31s-sina31s.dtb \ - sun6i-a31s-sinovoip-bpi-m2.dtb \ + sun6i-a31s-bananapi-m2.dtb \ sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi-m1.dtb \ diff --git a/arch/arm/boot/dts/sun6i-a31s-bananapi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-bananapi-m2.dts new file mode 100644 index 0000000..265f79d --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-bananapi-m2.dts @@ -0,0 +1,244 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include + +/ { + model = "Banana PI BPI-M2"; + compatible = "bananapi,bpi-m2", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bpi_m2>; + + blue { + label = "bpi-m2:blue:usr"; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + }; + + green { + label = "bpi-m2:green:usr"; + gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + }; + + red { + label = "bpi-m2:red:usr"; + gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ + }; + }; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; + reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&ehci0 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; + phy = <&phy1>; + phy-mode = "rgmii"; + snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + bias-pull-up; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v0>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2_pins_a { + bias-pull-up; +}; + +&ohci0 { + status = "okay"; +}; + +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pio { + gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { + pins = "PA21"; + function = "gpio_out"; + }; + + led_pins_bpi_m2: led_pins@0 { + pins = "PG5", "PG10", "PG11"; + function = "gpio_out"; + }; + + mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; + }; +}; + +&r_pio { + mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { + pins = "PL8"; + function = "gpio_out"; + }; +}; + +#include "axp22x.dtsi" + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vdd-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts deleted file mode 100644 index 265f79d..0000000 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" -#include - -/ { - model = "Banana PI BPI-M2"; - compatible = "bananapi,bpi-m2", "allwinner,sun6i-a31s"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bpi_m2>; - - blue { - label = "bpi-m2:blue:usr"; - gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ - }; - - green { - label = "bpi-m2:green:usr"; - gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ - }; - - red { - label = "bpi-m2:red:usr"; - gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ - }; - }; - - mmc2_pwrseq: mmc2_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; - reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc3>; -}; - -&ehci0 { - status = "okay"; -}; - -&gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; - phy = <&phy1>; - phy-mode = "rgmii"; - snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ - cd-inverted; - status = "okay"; -}; - -&mmc0_pins_a { - bias-pull-up; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; - mmc-pwrseq = <&mmc2_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: bcrmf@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&r_pio>; - interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2_pins_a { - bias-pull-up; -}; - -&ohci0 { - status = "okay"; -}; - -&p2wi { - status = "okay"; - - axp22x: pmic@68 { - compatible = "x-powers,axp221"; - reg = <0x68>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&pio { - gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - pins = "PA21"; - function = "gpio_out"; - }; - - led_pins_bpi_m2: led_pins@0 { - pins = "PG5", "PG10", "PG11"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - -&r_pio { - mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - pins = "PL8"; - function = "gpio_out"; - }; -}; - -#include "axp22x.dtsi" - -®_dc5ldo { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vdd-3v0"; -}; - -®_dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc4 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-sys-dll"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - status = "okay"; -};