diff mbox

[v4,1/4] ARM: dts: imx6ul-geam-kit: Remove re-enabled usdhc1

Message ID 1497596680-3186-1-git-send-email-jteki@openedev.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jagan Teki June 16, 2017, 7:04 a.m. UTC 
From: Jagan Teki <jagan@amarulasolutions.com>

usdhc1 is enabled and assigned pinctrl-0 on imx6ul-geam.dtsi
but same thing done on imx6ul-geam-kit.dts, so remove this
re-enabled node from the same.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- New patch

 arch/arm/boot/dts/imx6ul-geam-kit.dts | 6 ------
 1 file changed, 6 deletions(-)

Comments

Shawn Guo July 11, 2017, 2:11 a.m. UTC | #1 
On Fri, Jun 16, 2017 at 12:34:37PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> usdhc1 is enabled and assigned pinctrl-0 on imx6ul-geam.dtsi
> but same thing done on imx6ul-geam-kit.dts, so remove this
> re-enabled node from the same.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Applied all, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts
index 142e60c..40de2d7 100644
--- a/arch/arm/boot/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts
@@ -88,12 +88,6 @@ 
 	};
 };
 
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	status = "okay";
-};
-
 &tsc {
 	measure-delay-time = <0x1ffff>;
 	pre-charge-time = <0x1fff>;