diff mbox

[1/2,v2] ARM: dts: imx7d-sdb: Add DRM panel support

Message ID 1500052360-19272-1-git-send-email-marco.franchi@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Marco Franchi July 14, 2017, 5:12 p.m. UTC 
It is preferred to use the panel compatible string rather than passing the
LCD timming in the device tree.

So pass the "innolux,at043tn24" compatible string to describe the parallel
LCD on this board.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
Changes since v1:
- add missed space
 arch/arm/boot/dts/imx7d-sdb.dts | 36 +++++++++++++-----------------------
 1 file changed, 13 insertions(+), 23 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 2dce141..1600c7d 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -117,6 +117,16 @@ 
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <200000>;
 	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
 };
 
 &adc1 {
@@ -323,31 +333,11 @@ 
 &lcdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif>;
-	display = <&display0>;
 	status = "okay";
 
-	display0: display {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-
-			timing0: timing0 {
-				clock-frequency = <9200000>;
-				hactive = <480>;
-				vactive = <272>;
-				hfront-porch = <8>;
-				hback-porch = <4>;
-				hsync-len = <41>;
-				vback-porch = <2>;
-				vfront-porch = <4>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
+	port{
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
 		};
 	};
 };