diff mbox

[5/5] ARM: dts: imx6: RDU2: Add Micrel PHY interrupt

Message ID 1500323104-11583-6-git-send-email-andrew@lunn.ch (mailing list archive)
State New, archived
Headers show

Commit Message

Andrew Lunn July 17, 2017, 8:25 p.m. UTC 
The Micrel PHY has its interrupt pin connected to a GPIO line. Wire
this up in the device tree.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 83f311a51cca..eeb7679fd348 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -61,7 +61,11 @@ 
 		         &gpio6 4 GPIO_ACTIVE_HIGH>;
 
 		phy: ethernet-phy@0 {
+			pinctrl-0 = <&pinctrl_rmii_phy_irq>;
+			pinctrl-names = "default";
 			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};