diff mbox

[v2,1/2] dt-bindings: pwm: add bindings doc for ZTE ZX PWM controller

Message ID 1501143817-15843-2-git-send-email-shawnguo@kernel.org (mailing list archive)
State New, archived
Headers show

Commit Message

Shawn Guo July 27, 2017, 8:23 a.m. UTC
From: Shawn Guo <shawn.guo@linaro.org>

It adds bindings document for ZTE ZX PWM controller.  The device
has two clocks: PCLK and WCLK.  The PCLK is for register access, and
WCLK is the reference clock for calculating period and duty cycles.
Also, the device supports polarity configuration, so #pwm-cells should
be 3.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/pwm/pwm-zx.txt | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-zx.txt

Comments

Thierry Reding Aug. 21, 2017, 5:50 a.m. UTC | #1
On Thu, Jul 27, 2017 at 04:23:36PM +0800, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> It adds bindings document for ZTE ZX PWM controller.  The device
> has two clocks: PCLK and WCLK.  The PCLK is for register access, and
> WCLK is the reference clock for calculating period and duty cycles.
> Also, the device supports polarity configuration, so #pwm-cells should
> be 3.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/pwm/pwm-zx.txt | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/pwm-zx.txt

Applied to for-4.14/drivers, thanks.

Thierry
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pwm/pwm-zx.txt b/Documentation/devicetree/bindings/pwm/pwm-zx.txt
new file mode 100644
index 000000000000..a6bcc75c9164
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-zx.txt
@@ -0,0 +1,22 @@ 
+ZTE ZX PWM controller
+
+Required properties:
+ - compatible: Should be "zte,zx296718-pwm".
+ - reg: Physical base address and length of the controller's registers.
+ - clocks : The phandle and specifier referencing the controller's clocks.
+ - clock-names: "pclk" for PCLK, "wclk" for WCLK to the PWM controller.  The
+   PCLK is for register access, while WCLK is the reference clock for
+   calculating period and duty cycles.
+ - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+   the cells format.
+
+Example:
+
+	pwm: pwm@1439000 {
+		compatible = "zte,zx296718-pwm";
+		reg = <0x1439000 0x1000>;
+		clocks = <&lsp1crm LSP1_PWM_PCLK>,
+			 <&lsp1crm LSP1_PWM_WCLK>;
+		clock-names = "pclk", "wclk";
+		#pwm-cells = <3>;
+	};