diff mbox

[10/27] arm64/sve: Low-level CPU setup

Message ID 1502280338-23002-11-git-send-email-Dave.Martin@arm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dave Martin Aug. 9, 2017, 12:05 p.m. UTC
To enable the kernel to use SVE, all SVE traps from EL1 must be
disabled.  To take maximum advantage of the hardware, the full
available vector length also needs to be enabled for EL1 by
programming ZCR_EL2.LEN.  (The kernel will program ZCR_EL1.LEN as
required, but this cannot override the limit set by ZCR_EL2.)

In advance of full SVE support being implemented for userspace, it
also necessary to ensure that SVE traps from EL0 are enabled.

This patch makes the appropriate changes to the primary and
secondary CPU initialisation code.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
 arch/arm64/kernel/head.S | 13 ++++++++++++-
 arch/arm64/mm/proc.S     | 14 ++++++++++++--
 2 files changed, 24 insertions(+), 3 deletions(-)

Comments

Alex Bennée Aug. 22, 2017, 3:04 p.m. UTC | #1
Dave Martin <Dave.Martin@arm.com> writes:

> To enable the kernel to use SVE, all SVE traps from EL1 must be
> disabled.  To take maximum advantage of the hardware, the full
> available vector length also needs to be enabled for EL1 by
> programming ZCR_EL2.LEN.  (The kernel will program ZCR_EL1.LEN as
> required, but this cannot override the limit set by ZCR_EL2.)
>
> In advance of full SVE support being implemented for userspace, it
> also necessary to ensure that SVE traps from EL0 are enabled.
>
> This patch makes the appropriate changes to the primary and
> secondary CPU initialisation code.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> ---
>  arch/arm64/kernel/head.S | 13 ++++++++++++-
>  arch/arm64/mm/proc.S     | 14 ++++++++++++--
>  2 files changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index 973df7d..0ae1713 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -514,8 +514,19 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
>  	mov	x0, #0x33ff
>  	msr	cptr_el2, x0			// Disable copro. traps to EL2
>
> +	/* SVE register access */
> +	mrs	x1, id_aa64pfr0_el1
> +	ubfx	x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
> +	cbz	x1, 7f
> +
> +	bic	x0, x0, #CPTR_EL2_TZ		// Also disable SVE traps
> +	msr	cptr_el2, x0			// Disable copro. traps
> to EL2

It seems a shame to write to cptr_el2 twice rather than compute and
write.

> +	isb

Especially as the second one needs an isb :-/

But I don't see a much neater way of doing it so:

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

> +	mov	x1, #ZCR_ELx_LEN_MASK		// SVE: Enable full vector
> +	msr_s	SYS_ZCR_EL2, x1			// length for EL1.
> +
>  	/* Hypervisor stub */
> -	adr_l	x0, __hyp_stub_vectors
> +7:	adr_l	x0, __hyp_stub_vectors
>  	msr	vbar_el2, x0
>
>  	/* spsr */
> diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
> index 877d42f..dd22ef2 100644
> --- a/arch/arm64/mm/proc.S
> +++ b/arch/arm64/mm/proc.S
> @@ -27,6 +27,7 @@
>  #include <asm/pgtable-hwdef.h>
>  #include <asm/cpufeature.h>
>  #include <asm/alternative.h>
> +#include <asm/sysreg.h>
>
>  #ifdef CONFIG_ARM64_64K_PAGES
>  #define TCR_TG_FLAGS	TCR_TG0_64K | TCR_TG1_64K
> @@ -186,8 +187,17 @@ ENTRY(__cpu_setup)
>  	tlbi	vmalle1				// Invalidate local TLB
>  	dsb	nsh
>
> -	mov	x0, #3 << 20
> -	msr	cpacr_el1, x0			// Enable FP/ASIMD
> +	mov	x0, #3 << 20			// FEN
> +
> +	/* SVE */
> +	mrs	x5, id_aa64pfr0_el1
> +	ubfx	x5, x5, #ID_AA64PFR0_SVE_SHIFT, #4
> +	cbz	x5, 1f
> +
> +	bic	x0, x0, #CPACR_EL1_ZEN
> +	orr	x0, x0, #CPACR_EL1_ZEN_EL1EN	// SVE: trap for EL0, not EL1
> +1:	msr	cpacr_el1, x0			// Enable FP/ASIMD
> +
>  	mov	x0, #1 << 12			// Reset mdscr_el1 and disable
>  	msr	mdscr_el1, x0			// access to the DCC from EL0
>  	isb					// Unmask debug exceptions now,


--
Alex Bennée
Dave Martin Aug. 22, 2017, 3:33 p.m. UTC | #2
On Tue, Aug 22, 2017 at 04:04:28PM +0100, Alex Bennée wrote:
> 
> Dave Martin <Dave.Martin@arm.com> writes:
> 
> > To enable the kernel to use SVE, all SVE traps from EL1 must be
> > disabled.  To take maximum advantage of the hardware, the full
> > available vector length also needs to be enabled for EL1 by
> > programming ZCR_EL2.LEN.  (The kernel will program ZCR_EL1.LEN as
> > required, but this cannot override the limit set by ZCR_EL2.)
> >
> > In advance of full SVE support being implemented for userspace, it
> > also necessary to ensure that SVE traps from EL0 are enabled.
> >
> > This patch makes the appropriate changes to the primary and
> > secondary CPU initialisation code.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > ---
> >  arch/arm64/kernel/head.S | 13 ++++++++++++-
> >  arch/arm64/mm/proc.S     | 14 ++++++++++++--
> >  2 files changed, 24 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> > index 973df7d..0ae1713 100644
> > --- a/arch/arm64/kernel/head.S
> > +++ b/arch/arm64/kernel/head.S
> > @@ -514,8 +514,19 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
> >  	mov	x0, #0x33ff
> >  	msr	cptr_el2, x0			// Disable copro. traps to EL2
> >
> > +	/* SVE register access */
> > +	mrs	x1, id_aa64pfr0_el1
> > +	ubfx	x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
> > +	cbz	x1, 7f
> > +
> > +	bic	x0, x0, #CPTR_EL2_TZ		// Also disable SVE traps
> > +	msr	cptr_el2, x0			// Disable copro. traps
> > to EL2
> 
> It seems a shame to write to cptr_el2 twice rather than compute and
> write.
> 
> > +	isb
> 
> Especially as the second one needs an isb :-/
> 
> But I don't see a much neater way of doing it so:
> 
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

Thanks

Originally I think I did merge the CPTR writes here, but since this is
slow-path anyway, I figured it was better to keep the code simple rather
than introducing new interdependencies.

I could revisit it if someone has a strong view.

Cheers
---Dave

> 
> > +	mov	x1, #ZCR_ELx_LEN_MASK		// SVE: Enable full vector
> > +	msr_s	SYS_ZCR_EL2, x1			// length for EL1.
> > +
> >  	/* Hypervisor stub */
> > -	adr_l	x0, __hyp_stub_vectors
> > +7:	adr_l	x0, __hyp_stub_vectors
> >  	msr	vbar_el2, x0

[...]
diff mbox

Patch

diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 973df7d..0ae1713 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -514,8 +514,19 @@  CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	mov	x0, #0x33ff
 	msr	cptr_el2, x0			// Disable copro. traps to EL2
 
+	/* SVE register access */
+	mrs	x1, id_aa64pfr0_el1
+	ubfx	x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
+	cbz	x1, 7f
+
+	bic	x0, x0, #CPTR_EL2_TZ		// Also disable SVE traps
+	msr	cptr_el2, x0			// Disable copro. traps to EL2
+	isb
+	mov	x1, #ZCR_ELx_LEN_MASK		// SVE: Enable full vector
+	msr_s	SYS_ZCR_EL2, x1			// length for EL1.
+
 	/* Hypervisor stub */
-	adr_l	x0, __hyp_stub_vectors
+7:	adr_l	x0, __hyp_stub_vectors
 	msr	vbar_el2, x0
 
 	/* spsr */
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 877d42f..dd22ef2 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -27,6 +27,7 @@ 
 #include <asm/pgtable-hwdef.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative.h>
+#include <asm/sysreg.h>
 
 #ifdef CONFIG_ARM64_64K_PAGES
 #define TCR_TG_FLAGS	TCR_TG0_64K | TCR_TG1_64K
@@ -186,8 +187,17 @@  ENTRY(__cpu_setup)
 	tlbi	vmalle1				// Invalidate local TLB
 	dsb	nsh
 
-	mov	x0, #3 << 20
-	msr	cpacr_el1, x0			// Enable FP/ASIMD
+	mov	x0, #3 << 20			// FEN
+
+	/* SVE */
+	mrs	x5, id_aa64pfr0_el1
+	ubfx	x5, x5, #ID_AA64PFR0_SVE_SHIFT, #4
+	cbz	x5, 1f
+
+	bic	x0, x0, #CPACR_EL1_ZEN
+	orr	x0, x0, #CPACR_EL1_ZEN_EL1EN	// SVE: trap for EL0, not EL1
+1:	msr	cpacr_el1, x0			// Enable FP/ASIMD
+
 	mov	x0, #1 << 12			// Reset mdscr_el1 and disable
 	msr	mdscr_el1, x0			// access to the DCC from EL0
 	isb					// Unmask debug exceptions now,