| Message ID | 1502857706-18379-1-git-send-email-andy.gross@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/16/2017 09:58 AM, Andy Gross wrote: > This patch adds the necessary #phy-cells property to the DSI and HDMI > phys. The DSI and HDMI drivers don't use the common PHY framework, so we end up being okay without #phy-cells. But we do follow the PHY DT bindings, so it's necessary in that sense. Reviewed-by: Archit Taneja <architt@codeaurora.org> > > Signed-off-by: Andy Gross <andy.gross@linaro.org> > --- > arch/arm/boot/dts/qcom-apq8064.dtsi | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi > index f3db185..d08f3db 100644 > --- a/arch/arm/boot/dts/qcom-apq8064.dtsi > +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi > @@ -906,11 +906,11 @@ > usb_hs1_phy: phy { > compatible = "qcom,usb-hs-phy-apq8064", > "qcom,usb-hs-phy"; > - #phy-cells = <0>; > clocks = <&sleep_clk>, <&cxo_board>; > clock-names = "sleep", "ref"; > resets = <&usb1 0>; > reset-names = "por"; > + #phy-cells = <0>; > }; > }; > }; > @@ -1263,6 +1263,7 @@ > dsi0_phy: dsi-phy@4700200 { > compatible = "qcom,dsi-phy-28nm-8960"; > #clock-cells = <1>; > + #phy-cells = <0>; > > reg = <0x04700200 0x100>, > <0x04700300 0x200>, > @@ -1417,6 +1418,7 @@ > > clocks = <&mmcc HDMI_S_AHB_CLK>; > clock-names = "slave_iface_clk"; > + #phy-cells = <0>; > }; > > mdp: mdp@5100000 { >
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index f3db185..d08f3db 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -906,11 +906,11 @@ usb_hs1_phy: phy { compatible = "qcom,usb-hs-phy-apq8064", "qcom,usb-hs-phy"; - #phy-cells = <0>; clocks = <&sleep_clk>, <&cxo_board>; clock-names = "sleep", "ref"; resets = <&usb1 0>; reset-names = "por"; + #phy-cells = <0>; }; }; }; @@ -1263,6 +1263,7 @@ dsi0_phy: dsi-phy@4700200 { compatible = "qcom,dsi-phy-28nm-8960"; #clock-cells = <1>; + #phy-cells = <0>; reg = <0x04700200 0x100>, <0x04700300 0x200>, @@ -1417,6 +1418,7 @@ clocks = <&mmcc HDMI_S_AHB_CLK>; clock-names = "slave_iface_clk"; + #phy-cells = <0>; }; mdp: mdp@5100000 {
This patch adds the necessary #phy-cells property to the DSI and HDMI phys. Signed-off-by: Andy Gross <andy.gross@linaro.org> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)