| Message ID | 1503044085-5024-1-git-send-email-yinbo.zhu@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Aug 18, 2017 at 04:14:45PM +0800, yinbo.zhu@nxp.com wrote: > From: "yinbo.zhu" <yinbo.zhu@nxp.com> > > Fix the issue that usb is not detected on ls1088ardb > > Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> You are sending an updated patch. Please have the version number in subject prefix ... > --- ... and a change history here. There are a lot of good examples on the list. Please have a check. > arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++ > 2 files changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > index 213abb7..6c3c3bc 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > @@ -118,6 +118,14 @@ > status = "okay"; > }; > > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > + > &esdhc { > status = "okay"; > }; I had already put this on previous version - please sort these labelled nodes alphabetically. That said, &usb should go after &sata. Shawn
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 213abb7..6c3c3bc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -118,6 +118,14 @@ status = "okay"; }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &esdhc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index c144d06..c23fede 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -359,6 +359,26 @@ status = "disabled"; }; + usb0: usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + + usb1: usb3@3110000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + sata: sata@3200000 { compatible = "fsl,ls1088a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>,