diff mbox

ARM: dts: da850-evm: add chosen and SPI alias

Message ID 1504278444-13265-1-git-send-email-aford173@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Adam Ford Sept. 1, 2017, 3:07 p.m. UTC 
At the request of Sekhar Nori from TI, this is a follow-up to
pending ("ARM: dts: da850-evm: add serial and ethernet aliases")

This patch will add the chosen container to point stdout-path to serial2
and set the alias for spi0 to spi1 since the SPI NOR flash exists on SPI1.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Sekhar Nori Sept. 4, 2017, 8:30 a.m. UTC | #1 
On Friday 01 September 2017 08:37 PM, Adam Ford wrote:
> At the request of Sekhar Nori from TI, this is a follow-up to

This can be:

Suggested-by: Sekhar Nori <nsekhar@ti.com>

> pending ("ARM: dts: da850-evm: add serial and ethernet aliases")

Any patch dependency references need to go below the tear line ("---")
so they don't become part of commit text.

> This patch will add the chosen container to point stdout-path to serial2
> and set the alias for spi0 to spi1 since the SPI NOR flash exists on SPI1.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

Can you please re-spin with commit message corrected?

Thanks,
Sekhar
diff mbox

Patch

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index c755079..3962fa4 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,11 +15,16 @@ 
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
+	chosen {
+		stdout-path = &serial2;
+	};
+
 	aliases {
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
 		ethernet0 = &eth0;
+		spi0 = &spi1;
 	};
 
 	soc@1c00000 {