diff mbox

[v2] arm: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes

Message ID 1504674507-3364-1-git-send-email-surenderp@techveda.org (mailing list archive)
State New, archived
Headers show

Commit Message

surenderp@techveda.org Sept. 6, 2017, 5:08 a.m. UTC 
From: Surender Polsani <surenderp@techveda.org>

"interrupt-parent" property is declared in root node, so it is global
to all nodes. This property is re-declared in few sub-nodes. To avoid
duplication this property is removed from following sub-nodes: pmu,
amba@0, amba@0/ethernet.

Signed-off-by: Surender Polsani <surenderp@techveda.org>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
---
Changes for v2:

- Done few changes as suggested by Niklas Cassel.
- Patch is rebased and built(ARCH=arm) on latest next-20170905.
---
 arch/arm/boot/dts/artpec6.dtsi | 3 ---
 1 file changed, 3 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 767cbe8..2ed1177 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -151,7 +151,6 @@ 
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
-		interrupt-parent = <&intc>;
 	};
 
 	pcie: pcie@f8050000 {
@@ -185,7 +184,6 @@ 
 		compatible = "simple-bus";
 		#address-cells = <0x1>;
 		#size-cells = <0x1>;
-		interrupt-parent = <&intc>;
 		ranges;
 		dma-ranges = <0x80000000 0x00000000 0x40000000>;
 		dma-coherent;
@@ -195,7 +193,6 @@ 
 			clocks = <&eth_phy_ref_clk>,
 				<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
 			compatible = "snps,dwc-qos-ethernet-4.10";
-			interrupt-parent = <&intc>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xf8010000 0x4000>;