diff mbox

[02/12] arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes

Message ID 1505207272-16983-3-git-send-email-chaotian.jing@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chaotian Jing Sept. 12, 2017, 9:07 a.m. UTC
devicetree bindings has been updated to support multi-platforms,
so that each platform has its owns compatible name.
And, this compatible name may used in driver to distinguish with
other platform.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

Comments

Ulf Hansson Sept. 26, 2017, 10:37 p.m. UTC | #1
On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> devicetree bindings has been updated to support multi-platforms,
> so that each platform has its owns compatible name.
> And, this compatible name may used in driver to distinguish with
> other platform.

This does not seems to be DT backwards compatible.

If the driver starts interpreting the "mt8135-mmc" differently,
wouldn't that lead to old DTBs to become broken?

Kind regards
Uffe

>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
>  1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index b99a273..26396ef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -682,8 +682,7 @@
>                 };
>
>                 mmc0: mmc@11230000 {
> -                       compatible = "mediatek,mt8173-mmc",
> -                                    "mediatek,mt8135-mmc";
> +                       compatible = "mediatek,mt8173-mmc";
>                         reg = <0 0x11230000 0 0x1000>;
>                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
>                         clocks = <&pericfg CLK_PERI_MSDC30_0>,
> @@ -693,8 +692,7 @@
>                 };
>
>                 mmc1: mmc@11240000 {
> -                       compatible = "mediatek,mt8173-mmc",
> -                                    "mediatek,mt8135-mmc";
> +                       compatible = "mediatek,mt8173-mmc";
>                         reg = <0 0x11240000 0 0x1000>;
>                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
>                         clocks = <&pericfg CLK_PERI_MSDC30_1>,
> @@ -704,8 +702,7 @@
>                 };
>
>                 mmc2: mmc@11250000 {
> -                       compatible = "mediatek,mt8173-mmc",
> -                                    "mediatek,mt8135-mmc";
> +                       compatible = "mediatek,mt8173-mmc";
>                         reg = <0 0x11250000 0 0x1000>;
>                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
>                         clocks = <&pericfg CLK_PERI_MSDC30_2>,
> @@ -715,8 +712,7 @@
>                 };
>
>                 mmc3: mmc@11260000 {
> -                       compatible = "mediatek,mt8173-mmc",
> -                                    "mediatek,mt8135-mmc";
> +                       compatible = "mediatek,mt8173-mmc";
>                         reg = <0 0x11260000 0 0x1000>;
>                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
>                         clocks = <&pericfg CLK_PERI_MSDC30_3>,
> --
> 1.8.1.1.dirty
>
Chaotian Jing Sept. 27, 2017, 1:14 a.m. UTC | #2
On Wed, 2017-09-27 at 00:37 +0200, Ulf Hansson wrote:
> On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > devicetree bindings has been updated to support multi-platforms,
> > so that each platform has its owns compatible name.
> > And, this compatible name may used in driver to distinguish with
> > other platform.
> 
> This does not seems to be DT backwards compatible.
> 
> If the driver starts interpreting the "mt8135-mmc" differently,
> wouldn't that lead to old DTBs to become broken?
> 
> Kind regards
> Uffe
At patch 03/12, it shows that no difference between "mt8135-mmc" and
"mt8173-mmc", and following changes will make difference between these
two.
but, the user should update DTS & driver together,then will do not have
compatible issue.
> 
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
> >  1 file changed, 4 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index b99a273..26396ef 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -682,8 +682,7 @@
> >                 };
> >
> >                 mmc0: mmc@11230000 {
> > -                       compatible = "mediatek,mt8173-mmc",
> > -                                    "mediatek,mt8135-mmc";
> > +                       compatible = "mediatek,mt8173-mmc";
> >                         reg = <0 0x11230000 0 0x1000>;
> >                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
> >                         clocks = <&pericfg CLK_PERI_MSDC30_0>,
> > @@ -693,8 +692,7 @@
> >                 };
> >
> >                 mmc1: mmc@11240000 {
> > -                       compatible = "mediatek,mt8173-mmc",
> > -                                    "mediatek,mt8135-mmc";
> > +                       compatible = "mediatek,mt8173-mmc";
> >                         reg = <0 0x11240000 0 0x1000>;
> >                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> >                         clocks = <&pericfg CLK_PERI_MSDC30_1>,
> > @@ -704,8 +702,7 @@
> >                 };
> >
> >                 mmc2: mmc@11250000 {
> > -                       compatible = "mediatek,mt8173-mmc",
> > -                                    "mediatek,mt8135-mmc";
> > +                       compatible = "mediatek,mt8173-mmc";
> >                         reg = <0 0x11250000 0 0x1000>;
> >                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> >                         clocks = <&pericfg CLK_PERI_MSDC30_2>,
> > @@ -715,8 +712,7 @@
> >                 };
> >
> >                 mmc3: mmc@11260000 {
> > -                       compatible = "mediatek,mt8173-mmc",
> > -                                    "mediatek,mt8135-mmc";
> > +                       compatible = "mediatek,mt8173-mmc";
> >                         reg = <0 0x11260000 0 0x1000>;
> >                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
> >                         clocks = <&pericfg CLK_PERI_MSDC30_3>,
> > --
> > 1.8.1.1.dirty
> >
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index b99a273..26396ef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -682,8 +682,7 @@ 
 		};
 
 		mmc0: mmc@11230000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11230000 0 0x1000>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_0>,
@@ -693,8 +692,7 @@ 
 		};
 
 		mmc1: mmc@11240000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11240000 0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_1>,
@@ -704,8 +702,7 @@ 
 		};
 
 		mmc2: mmc@11250000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11250000 0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_2>,
@@ -715,8 +712,7 @@ 
 		};
 
 		mmc3: mmc@11260000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11260000 0 0x1000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_3>,