diff mbox

[3/3] ARM: dts: at91: sama5d27_som1_ek: fix USB host vbus

Message ID 1505399294-20041-4-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State New, archived
Headers show

Commit Message

Claudiu Beznea Sept. 14, 2017, 2:28 p.m. UTC 
From: Nicolas Ferre <nicolas.ferre@microchip.com>

The USB host has 3 ports so we must specify the entries for each
in the atmel,vbus-gpio property.
The specified pin (PA27) is the vbus for USBB and not USBA.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index be5cd913f274..60cb084a8d92 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -67,7 +67,10 @@ 
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";