diff mbox

[v4,5/5] ARM: dts: stm32: Add I2C1 support for STM32F746 eval board

Message ID 1505399319-14782-6-git-send-email-pierre-yves.mordret@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Pierre Yves MORDRET Sept. 14, 2017, 2:28 p.m. UTC
This patch adds I2C1 support for STM32F746 eval board

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 Version history:
    v4:
    v3:
        * None

    v2:
        * Add SCL Rising/Falling time for eval board
---
---
 arch/arm/boot/dts/stm32746g-eval.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Alexandre TORGUE Oct. 6, 2017, 1 p.m. UTC | #1
Hi

On 09/14/2017 04:28 PM, Pierre-Yves MORDRET wrote:
> This patch adds I2C1 support for STM32F746 eval board
> 
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>   Version history:
>      v4:
>      v3:
>          * None
> 
>      v2:
>          * Add SCL Rising/Falling time for eval board
> ---
> ---
>   arch/arm/boot/dts/stm32746g-eval.dts | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
> index 69a9579..9288c7a 100644
> --- a/arch/arm/boot/dts/stm32746g-eval.dts
> +++ b/arch/arm/boot/dts/stm32746g-eval.dts

Applied on stm32-dt-for-v4.15 branch.

Thanks
Alex

> @@ -102,3 +102,11 @@
>   	pinctrl-names = "default";
>   	status = "okay";
>   };
> +
> +&i2c1 {
> +	pinctrl-0 = <&i2c1_pins_b>;
> +	pinctrl-names = "default";
> +	i2c-scl-rising-time-ns = <185>;
> +	i2c-scl-falling-time-ns = <20>;
> +	status = "okay";
> +};
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 69a9579..9288c7a 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -102,3 +102,11 @@ 
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};