diff mbox

[v1] i2c:i2c-stm32f7: fix setup structure

Message ID 1506000609-27409-1-git-send-email-pierre-yves.mordret@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Pierre Yves MORDRET Sept. 21, 2017, 1:30 p.m. UTC 
I2C drive setup structure is not properly allocated.
Make it static instead of pointer to store driver data.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
 drivers/i2c/busses/i2c-stm32f7.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

Comments

Wolfram Sang Oct. 5, 2017, 11:14 a.m. UTC | #1 
On Thu, Sep 21, 2017 at 03:30:09PM +0200, Pierre-Yves MORDRET wrote:
> I2C drive setup structure is not properly allocated.
> Make it static instead of pointer to store driver data.
> 
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

Ouch! How did it work before?

Applied to for-current, thanks! Please provide a Fixes: tag next time,
did this for you now.
Pierre Yves MORDRET Oct. 6, 2017, 7:53 a.m. UTC | #2 
On 10/05/2017 01:14 PM, Wolfram Sang wrote:
> On Thu, Sep 21, 2017 at 03:30:09PM +0200, Pierre-Yves MORDRET wrote:
>> I2C drive setup structure is not properly allocated.
>> Make it static instead of pointer to store driver data.
>>
>> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> 
> Ouch! How did it work before?

Well yes it did. When it has been discovered during internal code review I was
skeptical but it turned out to be true. I tested on STM32 F7/H7 without any
trouble : scary !

> 
> Applied to for-current, thanks! Please provide a Fixes: tag next time,
> did this for you now.
> 
Sorry I wasn't aware about that. I gonna remember for the next time.
Thanks !

Py
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 47c67b0..42ebdb1 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -215,7 +215,7 @@  struct stm32f7_i2c_dev {
 	unsigned int msg_num;
 	unsigned int msg_id;
 	struct stm32f7_i2c_msg f7_msg;
-	struct stm32f7_i2c_setup *setup;
+	struct stm32f7_i2c_setup setup;
 	struct stm32f7_i2c_timings timing;
 };
 
@@ -537,7 +537,7 @@  static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
 	writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR);
 
 	/* Enable I2C */
-	if (i2c_dev->setup->analog_filter)
+	if (i2c_dev->setup.analog_filter)
 		stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
 				     STM32F7_I2C_CR1_ANFOFF);
 	else
@@ -887,22 +887,19 @@  static int stm32f7_i2c_probe(struct platform_device *pdev)
 	}
 
 	setup = of_device_get_match_data(&pdev->dev);
-	i2c_dev->setup->rise_time = setup->rise_time;
-	i2c_dev->setup->fall_time = setup->fall_time;
-	i2c_dev->setup->dnf = setup->dnf;
-	i2c_dev->setup->analog_filter = setup->analog_filter;
+	i2c_dev->setup = *setup;
 
 	ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns",
 				       &rise_time);
 	if (!ret)
-		i2c_dev->setup->rise_time = rise_time;
+		i2c_dev->setup.rise_time = rise_time;
 
 	ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns",
 				       &fall_time);
 	if (!ret)
-		i2c_dev->setup->fall_time = fall_time;
+		i2c_dev->setup.fall_time = fall_time;
 
-	ret = stm32f7_i2c_setup_timing(i2c_dev, i2c_dev->setup);
+	ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
 	if (ret)
 		goto clk_free;