diff mbox

[v2,12/14] ARM: dts: at91: at91sam9x25ek: add CAN1 interface

Message ID 1507630189-15504-13-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State New, archived
Headers show

Commit Message

Claudiu Beznea Oct. 10, 2017, 10:09 a.m. UTC 
From: Nicolas Ferre <nicolas.ferre@microchip.com>

As the CAN1 interface is not multiplexed with other peripherals on this
board, enable it so that it can be tested more easily.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/at91sam9x25ek.dts | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 494864836e83..f8360fb23107 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -16,6 +16,10 @@ 
 
 	ahb {
 		apb {
+			can1: can@f8004000 {
+				status = "okay";
+			};
+
 			macb0: ethernet@f802c000 {
 				phy-mode = "rmii";
 				status = "okay";