| Message ID | 1507630189-15504-7-git-send-email-claudiu.beznea@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 6c4c976a99d1..339f4e71cf40 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -136,7 +136,9 @@ }; pwm0: pwm@f802c000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>; + status = "disabled"; /* Conflict with leds. */ }; flx1: flexcom@f8038000 { @@ -529,7 +531,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; + status = "okay"; /* Conflict with pwm0. */ red { label = "red";
Add pin muxing for pwm0 and set it as disabled since it is in conflict with the pins for leds. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)