diff mbox

[v6,3/6] perf: hisi: Add support for HiSilicon SoC L3C PMU driver

Message ID 1508411121-125691-4-git-send-email-zhangshaokun@hisilicon.com (mailing list archive)
State New, archived
Headers show

Commit Message

Shaokun Zhang Oct. 19, 2017, 11:05 a.m. UTC
This patch adds support for L3C PMU driver in HiSilicon SoC chip, Each
L3C has own control, counter and interrupt registers and is an separate
PMU. For each L3C PMU, it has 8-programable counters and each counter
is free-running. Interrupt is supported to handle counter (48-bits)
overflow.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Anurup M <anurup.m@huawei.com>
---
 drivers/perf/hisilicon/Makefile              |   2 +-
 drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 463 +++++++++++++++++++++++++++
 include/linux/cpuhotplug.h                   |   1 +
 3 files changed, 465 insertions(+), 1 deletion(-)
 create mode 100644 drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
diff mbox

Patch

diff --git a/drivers/perf/hisilicon/Makefile b/drivers/perf/hisilicon/Makefile
index 2783bb3..4a3d3e6 100644
--- a/drivers/perf/hisilicon/Makefile
+++ b/drivers/perf/hisilicon/Makefile
@@ -1 +1 @@ 
-obj-$(CONFIG_HISI_PMU) += hisi_uncore_pmu.o
+obj-$(CONFIG_HISI_PMU) += hisi_uncore_pmu.o hisi_uncore_l3c_pmu.o
diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
new file mode 100644
index 0000000..0bde5d9
--- /dev/null
+++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
@@ -0,0 +1,463 @@ 
+/*
+ * HiSilicon SoC L3C uncore Hardware event counters support
+ *
+ * Copyright (C) 2017 Hisilicon Limited
+ * Author: Anurup M <anurup.m@huawei.com>
+ *         Shaokun Zhang <zhangshaokun@hisilicon.com>
+ *
+ * This code is based on the uncore PMUs like arm-cci and arm-ccn.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/acpi.h>
+#include <linux/bug.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/smp.h>
+
+#include "hisi_uncore_pmu.h"
+
+/* L3C register definition */
+#define L3C_PERF_CTRL		0x0408
+#define L3C_INT_MASK		0x0800
+#define L3C_INT_STATUS		0x0808
+#define L3C_INT_CLEAR		0x080c
+#define L3C_EVENT_CTRL	        0x1c00
+#define L3C_EVENT_TYPE0		0x1d00
+/*
+ * Each counter is 48-bits and [48:63] are reserved
+ * which are Read-As-Zero and Writes-Ignored.
+ */
+#define L3C_CNTR0_LOWER		0x1e00
+
+/* L3C has 8-counters */
+#define L3C_NR_COUNTERS		0x8
+
+#define L3C_PERF_CTRL_EN	0x20000
+#define L3C_EVTYPE_NONE		0xff
+
+/*
+ * Select the counter register offset using the counter index
+ */
+static u32 hisi_l3c_pmu_get_counter_offset(int cntr_idx)
+{
+	return (L3C_CNTR0_LOWER + (cntr_idx * 8));
+}
+
+static u64 hisi_l3c_pmu_read_counter(struct hisi_pmu *l3c_pmu,
+				     struct hw_perf_event *hwc)
+{
+	u32 idx = hwc->idx;
+
+	if (!hisi_uncore_pmu_counter_valid(l3c_pmu, idx)) {
+		dev_err(l3c_pmu->dev, "Unsupported event index:%d!\n", idx);
+		return 0;
+	}
+
+	/* Read 64-bits and the upper 16 bits are RAZ */
+	return readq(l3c_pmu->base + hisi_l3c_pmu_get_counter_offset(idx));
+}
+
+static void hisi_l3c_pmu_write_counter(struct hisi_pmu *l3c_pmu,
+				       struct hw_perf_event *hwc, u64 val)
+{
+	u32 idx = hwc->idx;
+
+	if (!hisi_uncore_pmu_counter_valid(l3c_pmu, idx)) {
+		dev_err(l3c_pmu->dev, "Unsupported event index:%d!\n", idx);
+		return;
+	}
+
+	/* Write 64-bits and the upper 16 bits are WI */
+	writeq(val, l3c_pmu->base + hisi_l3c_pmu_get_counter_offset(idx));
+}
+
+static void hisi_l3c_pmu_write_evtype(struct hisi_pmu *l3c_pmu, int idx,
+				      u32 type)
+{
+	u32 reg, reg_idx, shift, val;
+
+	/*
+	 * Select the appropriate event select register(L3C_EVENT_TYPE0/1).
+	 * There are 2 event select registers for the 8 hardware counters.
+	 * Event code is 8-bits and for the former 4 hardware counters,
+	 * L3C_EVENT_TYPE0 is chosen. For the latter 4 hardware counters,
+	 * L3C_EVENT_TYPE1 is chosen.
+	 */
+	reg = L3C_EVENT_TYPE0 + (idx / 4) * 4;
+	reg_idx = idx % 4;
+	shift = 8 * reg_idx;
+
+	/* Write event code to L3C_EVENT_TYPEx Register */
+	val = readl(l3c_pmu->base + reg);
+	val &= ~(L3C_EVTYPE_NONE << shift);
+	val |= (type << shift);
+	writel(val, l3c_pmu->base + reg);
+}
+
+static void hisi_l3c_pmu_start_counters(struct hisi_pmu *l3c_pmu)
+{
+	u32 val;
+
+	/*
+	 * Set perf_enable bit in L3C_PERF_CTRL register to start counting
+	 * for all enabled counters.
+	 */
+	val = readl(l3c_pmu->base + L3C_PERF_CTRL);
+	val |= L3C_PERF_CTRL_EN;
+	writel(val, l3c_pmu->base + L3C_PERF_CTRL);
+}
+
+static void hisi_l3c_pmu_stop_counters(struct hisi_pmu *l3c_pmu)
+{
+	u32 val;
+
+	/*
+	 * Clear perf_enable bit in L3C_PERF_CTRL register to stop counting
+	 * for all enabled counters.
+	 */
+	val = readl(l3c_pmu->base + L3C_PERF_CTRL);
+	val &= ~(L3C_PERF_CTRL_EN);
+	writel(val, l3c_pmu->base + L3C_PERF_CTRL);
+}
+
+static void hisi_l3c_pmu_enable_counter(struct hisi_pmu *l3c_pmu,
+					struct hw_perf_event *hwc)
+{
+	u32 val;
+
+	/* Enable counter index in L3C_EVENT_CTRL register */
+	val = readl(l3c_pmu->base + L3C_EVENT_CTRL);
+	val |= (1 << hwc->idx);
+	writel(val, l3c_pmu->base + L3C_EVENT_CTRL);
+}
+
+static void hisi_l3c_pmu_disable_counter(struct hisi_pmu *l3c_pmu,
+					 struct hw_perf_event *hwc)
+{
+	u32 val;
+
+	/* Clear counter index in L3C_EVENT_CTRL register */
+	val = readl(l3c_pmu->base + L3C_EVENT_CTRL);
+	val &= ~(1 << hwc->idx);
+	writel(val, l3c_pmu->base + L3C_EVENT_CTRL);
+}
+
+static void hisi_l3c_pmu_enable_counter_int(struct hisi_pmu *l3c_pmu,
+					    struct hw_perf_event *hwc)
+{
+	u32 val;
+
+	val = readl(l3c_pmu->base + L3C_INT_MASK);
+	/* Write 0 to enable interrupt */
+	val &= ~(1 << hwc->idx);
+	writel(val, l3c_pmu->base + L3C_INT_MASK);
+}
+
+static void hisi_l3c_pmu_disable_counter_int(struct hisi_pmu *l3c_pmu,
+					     struct hw_perf_event *hwc)
+{
+	u32 val;
+
+	val = readl(l3c_pmu->base + L3C_INT_MASK);
+	/* Write 1 to mask interrupt */
+	val |= (1 << hwc->idx);
+	writel(val, l3c_pmu->base + L3C_INT_MASK);
+}
+
+static irqreturn_t hisi_l3c_pmu_isr(int irq, void *dev_id)
+{
+	struct hisi_pmu *l3c_pmu = dev_id;
+	struct perf_event *event;
+	unsigned long overflown;
+	int idx;
+
+	/* Read L3C_INT_STATUS register */
+	overflown = readl(l3c_pmu->base + L3C_INT_STATUS);
+	if (!overflown)
+		return IRQ_NONE;
+
+	/*
+	 * Find the counter index which overflowed if the bit was set
+	 * and handle it.
+	 */
+	for_each_set_bit(idx, &overflown, L3C_NR_COUNTERS) {
+		/* Write 1 to clear the IRQ status flag */
+		writel((1 << idx), l3c_pmu->base + L3C_INT_CLEAR);
+
+		/* Get the corresponding event struct */
+		event = l3c_pmu->pmu_events.hw_events[idx];
+		if (!event)
+			continue;
+
+		hisi_uncore_pmu_event_update(event);
+		hisi_uncore_pmu_set_event_period(event);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int hisi_l3c_pmu_init_irq(struct hisi_pmu *l3c_pmu,
+				 struct platform_device *pdev)
+{
+	int irq, ret;
+
+	/* Read and init IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "L3C PMU get irq fail; irq:%d\n", irq);
+		return irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, hisi_l3c_pmu_isr,
+			       IRQF_NOBALANCING | IRQF_NO_THREAD,
+			       dev_name(&pdev->dev), l3c_pmu);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Fail to request IRQ:%d ret:%d\n", irq, ret);
+		return ret;
+	}
+
+	l3c_pmu->irq = irq;
+
+	return 0;
+}
+
+static const struct acpi_device_id hisi_l3c_pmu_acpi_match[] = {
+	{ "HISI0213", },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, hisi_l3c_pmu_acpi_match);
+
+static int hisi_l3c_pmu_init_data(struct platform_device *pdev,
+				  struct hisi_pmu *l3c_pmu)
+{
+	unsigned long long id;
+	struct resource *res;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev),
+				       "_UID", NULL, &id);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	l3c_pmu->index_id = id;
+
+	/*
+	 * Use the SCCL_ID and CCL_ID to identify the L3C PMU, while
+	 * SCCL_ID is in MPIDR[aff2] and CCL_ID is in MPIDR[aff1].
+	 */
+	if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id",
+				     &l3c_pmu->sccl_id)) {
+		dev_err(&pdev->dev, "Can not read l3c sccl-id!\n");
+		return -EINVAL;
+	}
+
+	if (device_property_read_u32(&pdev->dev, "hisilicon,ccl-id",
+				     &l3c_pmu->ccl_id)) {
+		dev_err(&pdev->dev, "Can not read l3c ccl-id!\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	l3c_pmu->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(l3c_pmu->base)) {
+		dev_err(&pdev->dev, "ioremap failed for l3c_pmu resource\n");
+		return PTR_ERR(l3c_pmu->base);
+	}
+
+	return 0;
+}
+
+static struct attribute *hisi_l3c_pmu_format_attr[] = {
+	HISI_PMU_FORMAT_ATTR(event, "config:0-7"),
+	NULL,
+};
+
+static const struct attribute_group hisi_l3c_pmu_format_group = {
+	.name = "format",
+	.attrs = hisi_l3c_pmu_format_attr,
+};
+
+static struct attribute *hisi_l3c_pmu_events_attr[] = {
+	HISI_PMU_EVENT_ATTR(rd_cpipe,		0x00),
+	HISI_PMU_EVENT_ATTR(wr_cpipe,		0x01),
+	HISI_PMU_EVENT_ATTR(rd_hit_cpipe,	0x02),
+	HISI_PMU_EVENT_ATTR(wr_hit_cpipe,	0x03),
+	HISI_PMU_EVENT_ATTR(victim_num,		0x04),
+	HISI_PMU_EVENT_ATTR(rd_spipe,		0x20),
+	HISI_PMU_EVENT_ATTR(wr_spipe,		0x21),
+	HISI_PMU_EVENT_ATTR(rd_hit_spipe,	0x22),
+	HISI_PMU_EVENT_ATTR(wr_hit_spipe,	0x23),
+	HISI_PMU_EVENT_ATTR(back_invalid,	0x29),
+	HISI_PMU_EVENT_ATTR(retry_cpu,		0x40),
+	HISI_PMU_EVENT_ATTR(retry_ring,		0x41),
+	HISI_PMU_EVENT_ATTR(prefetch_drop,	0x42),
+	NULL,
+};
+
+static const struct attribute_group hisi_l3c_pmu_events_group = {
+	.name = "events",
+	.attrs = hisi_l3c_pmu_events_attr,
+};
+
+static DEVICE_ATTR(cpumask, 0444, hisi_cpumask_sysfs_show, NULL);
+
+static struct attribute *hisi_l3c_pmu_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static const struct attribute_group hisi_l3c_pmu_cpumask_attr_group = {
+	.attrs = hisi_l3c_pmu_cpumask_attrs,
+};
+
+static const struct attribute_group *hisi_l3c_pmu_attr_groups[] = {
+	&hisi_l3c_pmu_format_group,
+	&hisi_l3c_pmu_events_group,
+	&hisi_l3c_pmu_cpumask_attr_group,
+	NULL,
+};
+
+static const struct hisi_uncore_ops hisi_uncore_l3c_ops = {
+	.write_evtype		= hisi_l3c_pmu_write_evtype,
+	.get_event_idx		= hisi_uncore_pmu_get_event_idx,
+	.start_counters		= hisi_l3c_pmu_start_counters,
+	.stop_counters		= hisi_l3c_pmu_stop_counters,
+	.enable_counter		= hisi_l3c_pmu_enable_counter,
+	.disable_counter	= hisi_l3c_pmu_disable_counter,
+	.enable_counter_int	= hisi_l3c_pmu_enable_counter_int,
+	.disable_counter_int	= hisi_l3c_pmu_disable_counter_int,
+	.write_counter		= hisi_l3c_pmu_write_counter,
+	.read_counter		= hisi_l3c_pmu_read_counter,
+};
+
+static int hisi_l3c_pmu_dev_probe(struct platform_device *pdev,
+				  struct hisi_pmu *l3c_pmu)
+{
+	int ret;
+
+	ret = hisi_l3c_pmu_init_data(pdev, l3c_pmu);
+	if (ret)
+		return ret;
+
+	ret = hisi_l3c_pmu_init_irq(l3c_pmu, pdev);
+	if (ret)
+		return ret;
+
+	l3c_pmu->num_counters = L3C_NR_COUNTERS;
+	l3c_pmu->counter_bits = 48;
+	l3c_pmu->ops = &hisi_uncore_l3c_ops;
+	l3c_pmu->dev = &pdev->dev;
+	l3c_pmu->on_cpu = -1;
+	l3c_pmu->check_event = 0x59;
+
+	return 0;
+}
+
+static int hisi_l3c_pmu_probe(struct platform_device *pdev)
+{
+	struct hisi_pmu *l3c_pmu;
+	char *name;
+	int ret;
+
+	l3c_pmu = devm_kzalloc(&pdev->dev, sizeof(*l3c_pmu), GFP_KERNEL);
+	if (!l3c_pmu)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, l3c_pmu);
+
+	ret = hisi_l3c_pmu_dev_probe(pdev, l3c_pmu);
+	if (ret)
+		return ret;
+
+	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
+				       &l3c_pmu->node);
+	if (ret) {
+		dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
+		return ret;
+	}
+
+	name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "hisi_sccl%u_l3c%u",
+			      l3c_pmu->sccl_id, l3c_pmu->index_id);
+	l3c_pmu->pmu = (struct pmu) {
+		.name		= name,
+		.task_ctx_nr	= perf_invalid_context,
+		.event_init	= hisi_uncore_pmu_event_init,
+		.pmu_enable	= hisi_uncore_pmu_enable,
+		.pmu_disable	= hisi_uncore_pmu_disable,
+		.add		= hisi_uncore_pmu_add,
+		.del		= hisi_uncore_pmu_del,
+		.start		= hisi_uncore_pmu_start,
+		.stop		= hisi_uncore_pmu_stop,
+		.read		= hisi_uncore_pmu_read,
+		.attr_groups	= hisi_l3c_pmu_attr_groups,
+	};
+
+	ret = perf_pmu_register(&l3c_pmu->pmu, name, -1);
+	if (ret) {
+		dev_err(l3c_pmu->dev, "L3C PMU register failed!\n");
+		cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
+					    &l3c_pmu->node);
+	}
+
+	return ret;
+}
+
+static int hisi_l3c_pmu_remove(struct platform_device *pdev)
+{
+	struct hisi_pmu *l3c_pmu = platform_get_drvdata(pdev);
+
+	perf_pmu_unregister(&l3c_pmu->pmu);
+	cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
+				    &l3c_pmu->node);
+
+	return 0;
+}
+
+static struct platform_driver hisi_l3c_pmu_driver = {
+	.driver = {
+		.name = "hisi_l3c_pmu",
+		.acpi_match_table = ACPI_PTR(hisi_l3c_pmu_acpi_match),
+	},
+	.probe = hisi_l3c_pmu_probe,
+	.remove = hisi_l3c_pmu_remove,
+};
+
+static int __init hisi_l3c_pmu_module_init(void)
+{
+	int ret;
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
+				      "AP_PERF_ARM_HISI_L3_ONLINE",
+				      hisi_uncore_pmu_online_cpu,
+				      hisi_uncore_pmu_offline_cpu);
+	if (ret) {
+		pr_err("L3C PMU: Error setup hotplug, ret = %d\n", ret);
+		return ret;
+	}
+
+	ret = platform_driver_register(&hisi_l3c_pmu_driver);
+	if (ret)
+		cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE);
+
+	return ret;
+}
+module_init(hisi_l3c_pmu_module_init);
+
+static void __exit hisi_l3c_pmu_module_exit(void)
+{
+	platform_driver_unregister(&hisi_l3c_pmu_driver);
+	cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE);
+}
+module_exit(hisi_l3c_pmu_module_exit);
+
+MODULE_DESCRIPTION("HiSilicon SoC L3C uncore PMU driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anurup M <anurup.m@huawei.com>");
+MODULE_AUTHOR("Shaokun Zhang <zhangshaokun@hisilicon.com>");
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 6d50876..9621efd 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -153,6 +153,7 @@  enum cpuhp_state {
 	CPUHP_AP_PERF_S390_SF_ONLINE,
 	CPUHP_AP_PERF_ARM_CCI_ONLINE,
 	CPUHP_AP_PERF_ARM_CCN_ONLINE,
+	CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
 	CPUHP_AP_PERF_ARM_L2X0_ONLINE,
 	CPUHP_AP_PERF_ARM_QCOM_L2_ONLINE,
 	CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE,