diff mbox

ARM: dts: imx6qdl-wandboard-revd1: Make EDID functional

Message ID 1510064971-18755-1-git-send-email-fabio.estevam@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Fabio Estevam Nov. 7, 2017, 2:29 p.m. UTC 
There are 0 ohm resistors that allow selecting the EDID I2C port to
be I2C1 or I2C2.

On revd1 the 0 ohm resistors are populated in such a way that the I2C2
is used as DDC I2C bus, so fix it accordingly. 

Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Shawn Guo Nov. 16, 2017, 11:12 a.m. UTC | #1 
On Tue, Nov 07, 2017 at 12:29:31PM -0200, Fabio Estevam wrote:
> There are 0 ohm resistors that allow selecting the EDID I2C port to
> be I2C1 or I2C2.
> 
> On revd1 the 0 ohm resistors are populated in such a way that the I2C2
> is used as DDC I2C bus, so fix it accordingly. 
> 
> Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
> Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index 6d8d9ca..3a8a495 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -21,6 +21,11 @@ 
 	};
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c3 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";