diff mbox

[v6,12/12] Documention: v4l: Documentation for HEVC CIDs

Message ID 1512724105-1778-13-git-send-email-smitha.t@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Smitha T Murthy Dec. 8, 2017, 9:08 a.m. UTC 
Added V4l2 controls for HEVC encoder

Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
---
 Documentation/media/uapi/v4l/extended-controls.rst | 395 +++++++++++++++++++++
 1 file changed, 395 insertions(+)

Comments

Hans Verkuil Jan. 22, 2018, 12:15 p.m. UTC | #1 
On 08/12/17 10:08, Smitha T Murthy wrote:
> Added V4l2 controls for HEVC encoder
> 
> Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
> ---
>  Documentation/media/uapi/v4l/extended-controls.rst | 395 +++++++++++++++++++++
>  1 file changed, 395 insertions(+)
> 
> diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
> index a3e81c1..3c92763 100644
> --- a/Documentation/media/uapi/v4l/extended-controls.rst
> +++ b/Documentation/media/uapi/v4l/extended-controls.rst
> @@ -1960,6 +1960,401 @@ enum v4l2_vp8_golden_frame_sel -
>      1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
>  
>  
> +High Efficiency Video Coding (HEVC/H.265) Control Reference
> +-----------------------------------------------------------
> +
> +The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265
> +video codec.
> +
> +
> +.. _hevc-control-id:
> +
> +HEVC/H.265 Control IDs
> +^^^^^^^^^^^^^^^^^^^^^^
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)``
> +    Minimum quantization parameter for HEVC.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)``
> +    Maximum quantization parameter for HEVC.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)``
> +    Quantization parameter for an I frame for HEVC.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)``
> +    Quantization parameter for a P frame for HEVC.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)``
> +    Quantization parameter for a B frame for HEVC.

I assume these values all have to be in the range MIN_QP to MAX_QP?
If so, then this should be documented I think.

> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)``
> +    HIERARCHICAL_QP allows host to specify the quantization parameter values

host -> the host

> +    for each temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
> +    if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the control value
> +    to 1 enables setting of the QP values for the layers.
> +
> +.. _v4l2-hevc-hier-coding-type:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE``
> +    (enum)
> +
> +enum v4l2_mpeg_video_hevc_hier_coding_type -
> +    Selects the hierarchical coding type for encoding. Possible values are:
> +
> +.. raw:: latex
> +
> +    \begin{adjustbox}{width=\columnwidth}
> +
> +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
> +      - Use the B frame for hierarchical coding.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
> +      - Use the P frame for hierarchical coding.
> +
> +.. raw:: latex
> +
> +    \end{adjustbox}
> +
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)``
> +    Selects the hierarchical coding layer. In normal encoding
> +    (non-hierarchial coding), it should be zero. Possible values are 0 ~ 6.

Use - instead of ~. Or just say: [0, 6]

> +    0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
> +    LAYER 1 and so on.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)``
> +    Indicates quantization parameter for hierarchical coding layer 0.
> +    For HEVC it can have a value of 0-51.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)``
> +    Indicates quantization parameter for hierarchical coding layer 1.
> +    For HEVC it can have a value of 0-51.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)``
> +    Indicates quantization parameter for hierarchical coding layer 2.
> +    For HEVC it can have a value of 0-51.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)``
> +    Indicates quantization parameter for hierarchical coding layer 3.
> +    For HEVC it can have a value of 0-51.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)``
> +    Indicates quantization parameter for hierarchical coding layer 4.
> +    For HEVC it can have a value of 0-51.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)``
> +    Indicates quantization parameter for hierarchical coding layer 5.
> +    For HEVC it can have a value of 0-51.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)``
> +    Indicates quantization parameter for hierarchical coding layer 6.
> +    For HEVC it can have a value of 0-51.

How do these controls relate to MIN_QP and MAX_QP?

> +
> +.. _v4l2-hevc-profile:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
> +    (enum)
> +
> +enum v4l2_mpeg_video_hevc_profile -
> +    Select the desired profile for HEVC encoder.
> +
> +.. raw:: latex
> +
> +    \begin{adjustbox}{width=\columnwidth}
> +
> +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
> +      - Main profile.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN10``
> +      - Main 10 profile.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
> +      - Main still picture profile.
> +
> +.. raw:: latex
> +
> +    \end{adjustbox}
> +
> +
> +.. _v4l2-hevc-level:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
> +    (enum)
> +
> +enum v4l2_mpeg_video_hevc_level -
> +    Selects the desired level for HEVC encoder.
> +
> +.. raw:: latex
> +
> +    \begin{adjustbox}{width=\columnwidth}
> +
> +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
> +      - Level 1.0
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
> +      - Level 2.0
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
> +      - Level 2.1
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
> +      - Level 3.0
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
> +      - Level 3.1
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
> +      - Level 4.0
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
> +      - Level 4.1
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
> +      - Level 5.0
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
> +      - Level 5.1
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
> +      - Level 5.2
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
> +      - Level 6.0
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
> +      - Level 6.1
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
> +      - Level 6.2
> +
> +.. raw:: latex
> +
> +    \end{adjustbox}
> +
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)``
> +    Indicates the number of evenly spaced subintervals, called ticks, within
> +    one second. This is a 16 bit unsigned integer and has a maximum value up to
> +    0xffff and a minimum value of 1.
> +
> +.. _v4l2-hevc-tier-flag:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_TIER_FLAG``
> +    (enum)
> +
> +enum v4l2_mpeg_video_hevc_tier_flag -
> +    TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier
> +    were made to deal with applications that differ in terms of maximum bit
> +    rate. Setting the flag to 0 selects HEVC tier_flag as Main tier and setting
> +    this flag to 1 indicates High tier. High tier is for applications requiring
> +    high bit rates.

Should this perhaps be a bool instead of an enum? Assuming this represents a
single bit. I'm not saying enum is wrong, I just wondered what makes the most
sense.

> +
> +.. raw:: latex
> +
> +    \begin{adjustbox}{width=\columnwidth}
> +
> +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
> +      - Main tier.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
> +      - High tier.
> +
> +.. raw:: latex
> +
> +    \end{adjustbox}
> +
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)``
> +    Selects HEVC maximum coding unit depth.
> +
> +.. _v4l2-hevc-loop-filter-mode:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE``
> +    (enum)
> +
> +enum v4l2_mpeg_video_hevc_loop_filter_mode -
> +    Loop filter mode for HEVC encoder. Possible values are:
> +
> +.. raw:: latex
> +
> +    \begin{adjustbox}{width=\columnwidth}
> +
> +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED``
> +      - Loop filter is disabled.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED``
> +      - Loop filter is enabled.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
> +      - Loop filter is disabled at the slice boundary.
> +
> +.. raw:: latex
> +
> +    \end{adjustbox}
> +
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)``
> +    Selects HEVC loop filter beta offset. The valid range is [-6, +6].
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)``
> +    Selects HEVC loop filter tc offset. The valid range is [-6, +6].
> +
> +.. _v4l2-hevc-refresh-type:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
> +    (enum)
> +
> +enum v4l2_mpeg_video_hevc_hier_refresh_type -
> +    Selects refresh type for HEVC encoder.
> +    Host has to specify the period into
> +    V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD.
> +
> +.. raw:: latex
> +
> +    \begin{adjustbox}{width=\columnwidth}
> +
> +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
> +      - Use the B frame for hierarchical coding.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
> +      - Use CRA (Clean Random Access Unit) picture encoding.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
> +      - Use IDR picture encoding.

Can you add the full name for IDR in brackets, just as you did for CRA?

> +
> +.. raw:: latex
> +
> +    \end{adjustbox}
> +
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)``
> +    Selects the refresh period for HEVC encoder.
> +    This specifies the number of I pictures between two CRA/IDR pictures.
> +    This is valid only if REFRESH_TYPE is not 0.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)``
> +    Indicates HEVC lossless encoding. Setting it to 0 disables lossless
> +    encoding. Setting it to 1 enables lossless encoding.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)``
> +    Indicates constant intra prediction for HEVC encoder. Specifies the
> +    constrained intra prediction in which intra largest coding unit (LCU)
> +    prediction is performed by using residual data and decoded samples of
> +    neighboring intra LCU only. Setting the value to 1 enables constant intra
> +    prediction and setting the value to 0 disables constant inta prediction.

inta -> intra

> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)``
> +    Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
> +    disables the feature and setting it to 1 enables the wavefront parallel
> +    processing.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)``
> +    Setting the value to 1 enables combination of P and B frame for HEVC
> +    encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)``
> +    Indicates temporal identifier for HEVC encoder which is enabled by
> +    setting the value to 1.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)``
> +    Indicates bi-linear interpolation is conditionally used in the intra
> +    prediction filtering process in the CVS when set to 1. Indicates bi-linear
> +    interpolation is not used in the CVS when set to 0.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)``
> +    Indicates maximum number of merge candidate motion vectors.
> +    Values are from zero to four.

Use number 0 and 4 instead of text.

> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)``
> +    Indicates temporal motion vector prediction for HEVC encoder. Setting it to
> +    1 enables the prediction. Setting it to 0 disables the prediction.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)``
> +    Specifies if HEVC generates a stream with a size of the length field
> +    instead of start code pattern. The size of the length field is configurable
> +    through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting
> +    the value to 0 disables encoding without startcode pattern. Setting the
> +    value to 1 will enables encoding without startcode pattern.
> +
> +.. _v4l2-hevc-size-of-length-field:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
> +(enum)
> +
> +enum v4l2_mpeg_video_hevc_size_of_length_field -
> +    Indicates the size of length field.
> +    This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
> +
> +.. raw:: latex
> +
> +    \begin{adjustbox}{width=\columnwidth}
> +
> +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
> +      - Generate start code pattern (Normal).
> +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
> +      - Generate size of length field instead of start code pattern and length is 1.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
> +      - Generate size of length field instead of start code pattern and length is 2.
> +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
> +      - Generate size of length field instead of start code pattern and length is 4.
> +
> +.. raw:: latex
> +
> +    \end{adjustbox}
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)``
> +    Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)``
> +    Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)``
> +    Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)``
> +    Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)``
> +    Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)``
> +    Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)``
> +    Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
> +
> +``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)``
> +    Selects number of P reference pictures required for HEVC encoder.
> +    P-Frame can use 1 or 2 frames for reference.
> +
> +``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)``
> +    Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
> +    disables generating SPS and PPS at every IDR. Setting it to one enables
> +    generating SPS and PPS at every IDR.
> +
> +
>  .. _camera-controls:
>  
>  Camera Control Reference
> 

Regards,

	Hans
Smitha T Murthy Jan. 23, 2018, 5:40 a.m. UTC | #2 
On Mon, 2018-01-22 at 13:15 +0100, Hans Verkuil wrote:
> On 08/12/17 10:08, Smitha T Murthy wrote:
> > Added V4l2 controls for HEVC encoder
> > 
> > Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
> > ---
> >  Documentation/media/uapi/v4l/extended-controls.rst | 395 +++++++++++++++++++++
> >  1 file changed, 395 insertions(+)
> > 
> > diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
> > index a3e81c1..3c92763 100644
> > --- a/Documentation/media/uapi/v4l/extended-controls.rst
> > +++ b/Documentation/media/uapi/v4l/extended-controls.rst
> > @@ -1960,6 +1960,401 @@ enum v4l2_vp8_golden_frame_sel -
> >      1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
> >  
> >  
> > +High Efficiency Video Coding (HEVC/H.265) Control Reference
> > +-----------------------------------------------------------
> > +
> > +The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265
> > +video codec.
> > +
> > +
> > +.. _hevc-control-id:
> > +
> > +HEVC/H.265 Control IDs
> > +^^^^^^^^^^^^^^^^^^^^^^
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)``
> > +    Minimum quantization parameter for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)``
> > +    Maximum quantization parameter for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)``
> > +    Quantization parameter for an I frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)``
> > +    Quantization parameter for a P frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)``
> > +    Quantization parameter for a B frame for HEVC.
> 
> I assume these values all have to be in the range MIN_QP to MAX_QP?
> If so, then this should be documented I think.
> 
Yes they should be in the limit. I will mention the range in next
version.

> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)``
> > +    HIERARCHICAL_QP allows host to specify the quantization parameter values
> 
> host -> the host
ok I will change it.
> 
> > +    for each temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
> > +    if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the control value
> > +    to 1 enables setting of the QP values for the layers.
> > +
> > +.. _v4l2-hevc-hier-coding-type:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_hier_coding_type -
> > +    Selects the hierarchical coding type for encoding. Possible values are:
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
> > +      - Use the B frame for hierarchical coding.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
> > +      - Use the P frame for hierarchical coding.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)``
> > +    Selects the hierarchical coding layer. In normal encoding
> > +    (non-hierarchial coding), it should be zero. Possible values are 0 ~ 6.
> 
> Use - instead of ~. Or just say: [0, 6]
> 
ok I will change it.
> > +    0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
> > +    LAYER 1 and so on.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)``
> > +    Indicates quantization parameter for hierarchical coding layer 0.
> > +    For HEVC it can have a value of 0-51.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)``
> > +    Indicates quantization parameter for hierarchical coding layer 1.
> > +    For HEVC it can have a value of 0-51.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)``
> > +    Indicates quantization parameter for hierarchical coding layer 2.
> > +    For HEVC it can have a value of 0-51.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)``
> > +    Indicates quantization parameter for hierarchical coding layer 3.
> > +    For HEVC it can have a value of 0-51.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)``
> > +    Indicates quantization parameter for hierarchical coding layer 4.
> > +    For HEVC it can have a value of 0-51.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)``
> > +    Indicates quantization parameter for hierarchical coding layer 5.
> > +    For HEVC it can have a value of 0-51.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)``
> > +    Indicates quantization parameter for hierarchical coding layer 6.
> > +    For HEVC it can have a value of 0-51.
> 
> How do these controls relate to MIN_QP and MAX_QP?
> 
Here each layer will adhere to MAX_QP and MIN_QP set.
> > +
> > +.. _v4l2-hevc-profile:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_profile -
> > +    Select the desired profile for HEVC encoder.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
> > +      - Main profile.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN10``
> > +      - Main 10 profile.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
> > +      - Main still picture profile.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +.. _v4l2-hevc-level:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_level -
> > +    Selects the desired level for HEVC encoder.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
> > +      - Level 1.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
> > +      - Level 2.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
> > +      - Level 2.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
> > +      - Level 3.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
> > +      - Level 3.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
> > +      - Level 4.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
> > +      - Level 4.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
> > +      - Level 5.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
> > +      - Level 5.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
> > +      - Level 5.2
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
> > +      - Level 6.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
> > +      - Level 6.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
> > +      - Level 6.2
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)``
> > +    Indicates the number of evenly spaced subintervals, called ticks, within
> > +    one second. This is a 16 bit unsigned integer and has a maximum value up to
> > +    0xffff and a minimum value of 1.
> > +
> > +.. _v4l2-hevc-tier-flag:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TIER_FLAG``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_tier_flag -
> > +    TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier
> > +    were made to deal with applications that differ in terms of maximum bit
> > +    rate. Setting the flag to 0 selects HEVC tier_flag as Main tier and setting
> > +    this flag to 1 indicates High tier. High tier is for applications requiring
> > +    high bit rates.
> 
> Should this perhaps be a bool instead of an enum? Assuming this represents a
> single bit. I'm not saying enum is wrong, I just wondered what makes the most
> sense.

I had initially kept it as boolean but Andrzej asked me to change it to
enum [https://patchwork.kernel.org/patch/9655731/]


> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
> > +      - Main tier.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
> > +      - High tier.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)``
> > +    Selects HEVC maximum coding unit depth.
> > +
> > +.. _v4l2-hevc-loop-filter-mode:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_loop_filter_mode -
> > +    Loop filter mode for HEVC encoder. Possible values are:
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED``
> > +      - Loop filter is disabled.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED``
> > +      - Loop filter is enabled.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
> > +      - Loop filter is disabled at the slice boundary.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)``
> > +    Selects HEVC loop filter beta offset. The valid range is [-6, +6].
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)``
> > +    Selects HEVC loop filter tc offset. The valid range is [-6, +6].
> > +
> > +.. _v4l2-hevc-refresh-type:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_hier_refresh_type -
> > +    Selects refresh type for HEVC encoder.
> > +    Host has to specify the period into
> > +    V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
> > +      - Use the B frame for hierarchical coding.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
> > +      - Use CRA (Clean Random Access Unit) picture encoding.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
> > +      - Use IDR picture encoding.
> 
> Can you add the full name for IDR in brackets, just as you did for CRA?
> 
Yes I will add it
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)``
> > +    Selects the refresh period for HEVC encoder.
> > +    This specifies the number of I pictures between two CRA/IDR pictures.
> > +    This is valid only if REFRESH_TYPE is not 0.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)``
> > +    Indicates HEVC lossless encoding. Setting it to 0 disables lossless
> > +    encoding. Setting it to 1 enables lossless encoding.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)``
> > +    Indicates constant intra prediction for HEVC encoder. Specifies the
> > +    constrained intra prediction in which intra largest coding unit (LCU)
> > +    prediction is performed by using residual data and decoded samples of
> > +    neighboring intra LCU only. Setting the value to 1 enables constant intra
> > +    prediction and setting the value to 0 disables constant inta prediction.
> 
> inta -> intra
> 
ok
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)``
> > +    Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
> > +    disables the feature and setting it to 1 enables the wavefront parallel
> > +    processing.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)``
> > +    Setting the value to 1 enables combination of P and B frame for HEVC
> > +    encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)``
> > +    Indicates temporal identifier for HEVC encoder which is enabled by
> > +    setting the value to 1.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)``
> > +    Indicates bi-linear interpolation is conditionally used in the intra
> > +    prediction filtering process in the CVS when set to 1. Indicates bi-linear
> > +    interpolation is not used in the CVS when set to 0.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)``
> > +    Indicates maximum number of merge candidate motion vectors.
> > +    Values are from zero to four.
> 
> Use number 0 and 4 instead of text.
> 
ok
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)``
> > +    Indicates temporal motion vector prediction for HEVC encoder. Setting it to
> > +    1 enables the prediction. Setting it to 0 disables the prediction.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)``
> > +    Specifies if HEVC generates a stream with a size of the length field
> > +    instead of start code pattern. The size of the length field is configurable
> > +    through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting
> > +    the value to 0 disables encoding without startcode pattern. Setting the
> > +    value to 1 will enables encoding without startcode pattern.
> > +
> > +.. _v4l2-hevc-size-of-length-field:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
> > +(enum)
> > +
> > +enum v4l2_mpeg_video_hevc_size_of_length_field -
> > +    Indicates the size of length field.
> > +    This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
> > +      - Generate start code pattern (Normal).
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
> > +      - Generate size of length field instead of start code pattern and length is 1.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
> > +      - Generate size of length field instead of start code pattern and length is 2.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
> > +      - Generate size of length field instead of start code pattern and length is 4.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)``
> > +    Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)``
> > +    Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)``
> > +    Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)``
> > +    Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)``
> > +    Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)``
> > +    Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)``
> > +    Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)``
> > +    Selects number of P reference pictures required for HEVC encoder.
> > +    P-Frame can use 1 or 2 frames for reference.
> > +
> > +``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)``
> > +    Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
> > +    disables generating SPS and PPS at every IDR. Setting it to one enables
> > +    generating SPS and PPS at every IDR.
> > +
> > +
> >  .. _camera-controls:
> >  
> >  Camera Control Reference
> > 
> 
> Regards,
> 
> 	Hans
> 
>
diff mbox

Patch

diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index a3e81c1..3c92763 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -1960,6 +1960,401 @@  enum v4l2_vp8_golden_frame_sel -
     1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
 
 
+High Efficiency Video Coding (HEVC/H.265) Control Reference
+-----------------------------------------------------------
+
+The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265
+video codec.
+
+
+.. _hevc-control-id:
+
+HEVC/H.265 Control IDs
+^^^^^^^^^^^^^^^^^^^^^^
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)``
+    Minimum quantization parameter for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)``
+    Maximum quantization parameter for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)``
+    Quantization parameter for a P frame for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)``
+    Quantization parameter for a B frame for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)``
+    HIERARCHICAL_QP allows host to specify the quantization parameter values
+    for each temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
+    if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the control value
+    to 1 enables setting of the QP values for the layers.
+
+.. _v4l2-hevc-hier-coding-type:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_hier_coding_type -
+    Selects the hierarchical coding type for encoding. Possible values are:
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
+      - Use the B frame for hierarchical coding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
+      - Use the P frame for hierarchical coding.
+
+.. raw:: latex
+
+    \end{adjustbox}
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)``
+    Selects the hierarchical coding layer. In normal encoding
+    (non-hierarchial coding), it should be zero. Possible values are 0 ~ 6.
+    0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
+    LAYER 1 and so on.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 0.
+    For HEVC it can have a value of 0-51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 1.
+    For HEVC it can have a value of 0-51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 2.
+    For HEVC it can have a value of 0-51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 3.
+    For HEVC it can have a value of 0-51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 4.
+    For HEVC it can have a value of 0-51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 5.
+    For HEVC it can have a value of 0-51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 6.
+    For HEVC it can have a value of 0-51.
+
+.. _v4l2-hevc-profile:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_profile -
+    Select the desired profile for HEVC encoder.
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
+      - Main profile.
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN10``
+      - Main 10 profile.
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
+      - Main still picture profile.
+
+.. raw:: latex
+
+    \end{adjustbox}
+
+
+.. _v4l2-hevc-level:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_level -
+    Selects the desired level for HEVC encoder.
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
+      - Level 1.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
+      - Level 2.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
+      - Level 2.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
+      - Level 3.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
+      - Level 3.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
+      - Level 4.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
+      - Level 4.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
+      - Level 5.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
+      - Level 5.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
+      - Level 5.2
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
+      - Level 6.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
+      - Level 6.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
+      - Level 6.2
+
+.. raw:: latex
+
+    \end{adjustbox}
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)``
+    Indicates the number of evenly spaced subintervals, called ticks, within
+    one second. This is a 16 bit unsigned integer and has a maximum value up to
+    0xffff and a minimum value of 1.
+
+.. _v4l2-hevc-tier-flag:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TIER_FLAG``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_tier_flag -
+    TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier
+    were made to deal with applications that differ in terms of maximum bit
+    rate. Setting the flag to 0 selects HEVC tier_flag as Main tier and setting
+    this flag to 1 indicates High tier. High tier is for applications requiring
+    high bit rates.
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
+      - Main tier.
+    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
+      - High tier.
+
+.. raw:: latex
+
+    \end{adjustbox}
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)``
+    Selects HEVC maximum coding unit depth.
+
+.. _v4l2-hevc-loop-filter-mode:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_loop_filter_mode -
+    Loop filter mode for HEVC encoder. Possible values are:
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED``
+      - Loop filter is disabled.
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED``
+      - Loop filter is enabled.
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
+      - Loop filter is disabled at the slice boundary.
+
+.. raw:: latex
+
+    \end{adjustbox}
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)``
+    Selects HEVC loop filter beta offset. The valid range is [-6, +6].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)``
+    Selects HEVC loop filter tc offset. The valid range is [-6, +6].
+
+.. _v4l2-hevc-refresh-type:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_hier_refresh_type -
+    Selects refresh type for HEVC encoder.
+    Host has to specify the period into
+    V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD.
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
+      - Use the B frame for hierarchical coding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
+      - Use CRA (Clean Random Access Unit) picture encoding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
+      - Use IDR picture encoding.
+
+.. raw:: latex
+
+    \end{adjustbox}
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)``
+    Selects the refresh period for HEVC encoder.
+    This specifies the number of I pictures between two CRA/IDR pictures.
+    This is valid only if REFRESH_TYPE is not 0.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)``
+    Indicates HEVC lossless encoding. Setting it to 0 disables lossless
+    encoding. Setting it to 1 enables lossless encoding.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)``
+    Indicates constant intra prediction for HEVC encoder. Specifies the
+    constrained intra prediction in which intra largest coding unit (LCU)
+    prediction is performed by using residual data and decoded samples of
+    neighboring intra LCU only. Setting the value to 1 enables constant intra
+    prediction and setting the value to 0 disables constant inta prediction.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)``
+    Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
+    disables the feature and setting it to 1 enables the wavefront parallel
+    processing.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)``
+    Setting the value to 1 enables combination of P and B frame for HEVC
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)``
+    Indicates temporal identifier for HEVC encoder which is enabled by
+    setting the value to 1.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)``
+    Indicates bi-linear interpolation is conditionally used in the intra
+    prediction filtering process in the CVS when set to 1. Indicates bi-linear
+    interpolation is not used in the CVS when set to 0.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)``
+    Indicates maximum number of merge candidate motion vectors.
+    Values are from zero to four.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)``
+    Indicates temporal motion vector prediction for HEVC encoder. Setting it to
+    1 enables the prediction. Setting it to 0 disables the prediction.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)``
+    Specifies if HEVC generates a stream with a size of the length field
+    instead of start code pattern. The size of the length field is configurable
+    through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting
+    the value to 0 disables encoding without startcode pattern. Setting the
+    value to 1 will enables encoding without startcode pattern.
+
+.. _v4l2-hevc-size-of-length-field:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
+(enum)
+
+enum v4l2_mpeg_video_hevc_size_of_length_field -
+    Indicates the size of length field.
+    This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
+      - Generate start code pattern (Normal).
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
+      - Generate size of length field instead of start code pattern and length is 1.
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
+      - Generate size of length field instead of start code pattern and length is 2.
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
+      - Generate size of length field instead of start code pattern and length is 4.
+
+.. raw:: latex
+
+    \end{adjustbox}
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)``
+    Selects number of P reference pictures required for HEVC encoder.
+    P-Frame can use 1 or 2 frames for reference.
+
+``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)``
+    Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
+    disables generating SPS and PPS at every IDR. Setting it to one enables
+    generating SPS and PPS at every IDR.
+
+
 .. _camera-controls:
 
 Camera Control Reference