diff mbox

[1/3] dt-bindings: bcm2836-l1-intc: add interrupt polarity support

Message ID 1513024752-11246-2-git-send-email-stefan.wahren@i2se.com (mailing list archive)
State New, archived
Headers show

Commit Message

Stefan Wahren Dec. 11, 2017, 8:39 p.m. UTC
This increases the interrupt cells for the 1st level interrupt controller
binding in order to describe the polarity like on the other ARM platforms.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 .../devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Eric Anholt Dec. 15, 2017, 9:53 p.m. UTC | #1
Stefan Wahren <stefan.wahren@i2se.com> writes:

> This increases the interrupt cells for the 1st level interrupt controller
> binding in order to describe the polarity like on the other ARM platforms.
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>

I'm happy with this.  Any DT maintainer concerns?
Rob Herring (Arm) Dec. 15, 2017, 10:23 p.m. UTC | #2
On Mon, Dec 11, 2017 at 09:39:10PM +0100, Stefan Wahren wrote:
> This increases the interrupt cells for the 1st level interrupt controller
> binding in order to describe the polarity like on the other ARM platforms.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
>  .../devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
index f320dcd..8ced169 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -12,7 +12,7 @@  Required properties:
 			  registers
 - interrupt-controller:	Identifies the node as an interrupt controller
 - #interrupt-cells:	Specifies the number of cells needed to encode an
-			  interrupt source. The value shall be 1
+			  interrupt source. The value shall be 2
 
 Please refer to interrupts.txt in this directory for details of the common
 Interrupt Controllers bindings used by client devices.
@@ -32,6 +32,6 @@  local_intc: local_intc {
 	compatible = "brcm,bcm2836-l1-intc";
 	reg = <0x40000000 0x100>;
 	interrupt-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-parent = <&local_intc>;
 };