| Message ID | 1516725734-32745-2-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Mittwoch, den 24.01.2018, 00:42 +0800 schrieb Anson Huang: > Add ARM power domain in PGC. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > --- > this patch should be based on 0001-ARM-dts-imx6sx-add-pu-power-domain-support.patch > arch/arm/boot/dts/imx6sx.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi > index 42ef4c6..aa29ca6 100644 > --- a/arch/arm/boot/dts/imx6sx.dtsi > +++ b/arch/arm/boot/dts/imx6sx.dtsi > @@ -768,6 +768,11 @@ > > #address-cells = <1>; > > #size-cells = <0>; > > > + power-domain@0 { > > + reg = <0>; > > + #power-domain-cells = <0>; > > + }; > + > > > pd_pu: power-domain@1 { > > reg = <1>; > > #power-domain-cells = <0>;
On Wed, Jan 24, 2018 at 12:42:14AM +0800, Anson Huang wrote: > Add ARM power domain in PGC. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > --- > this patch should be based on 0001-ARM-dts-imx6sx-add-pu-power-domain-support.patch > arch/arm/boot/dts/imx6sx.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi > index 42ef4c6..aa29ca6 100644 > --- a/arch/arm/boot/dts/imx6sx.dtsi > +++ b/arch/arm/boot/dts/imx6sx.dtsi > @@ -768,6 +768,11 @@ > #address-cells = <1>; > #size-cells = <0>; > > + power-domain@0 { Nitpick: probably an 'arm' prefix is better: arm: power-domain@0 Anyway, it's minor depends on maintainer's perference. Otherwise, looks fine Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Dong Aisheng > + reg = <0>; > + #power-domain-cells = <0>; > + }; > + > pd_pu: power-domain@1 { > reg = <1>; > #power-domain-cells = <0>; > -- > 2.7.4 >
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 42ef4c6..aa29ca6 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -768,6 +768,11 @@ #address-cells = <1>; #size-cells = <0>; + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + pd_pu: power-domain@1 { reg = <1>; #power-domain-cells = <0>;
Add ARM power domain in PGC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- this patch should be based on 0001-ARM-dts-imx6sx-add-pu-power-domain-support.patch arch/arm/boot/dts/imx6sx.dtsi | 5 +++++ 1 file changed, 5 insertions(+)