diff mbox

[v3,2/2] ARM: dts: imx: Add basic dts support for imx6sll EVK board

Message ID 1517969481-13411-2-git-send-email-ping.bai@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jacky Bai Feb. 7, 2018, 2:11 a.m. UTC
Add dts file support for imx6sll EVK board.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
 change v2->v3:
 - use generic pinconfig binding
---
 Documentation/devicetree/bindings/arm/fsl.txt |   4 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/imx6sll-evk.dts             | 374 ++++++++++++++++++++++++++
 3 files changed, 380 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts

Comments

Fabio Estevam Feb. 7, 2018, 2:44 a.m. UTC | #1
On Wed, Feb 7, 2018 at 12:11 AM, Bai Ping <ping.bai@nxp.com> wrote:

> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sll-evk.dts
> @@ -0,0 +1,374 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + * Copyright 2017-2018 NXP.
> + *
> + * SPDX-License-Identifier: (GPL-2.0 OR MIT)

The SPDX line should be the first one and it should start with //

> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "imx6sll.dtsi"
> +
> +/ {
> +       model = "Freescale i.MX6SLL EVK Board";
> +       compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
> +
> +       memory {

memory@80000000

> +               reg = <0x80000000 0x80000000>;

> +       reg_aud4v: reg-aud4v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "wm8962-supply-4v2";
> +               regulator-min-microvolt = <4325000>;
> +               regulator-max-microvolt = <4325000>;
> +               regulator-boot-on;
> +       };
> +
> +       reg_lcd: reg-lcd {
> +               compatible = "regulator-fixed";
> +               regulator-name = "lcd-pwr";
> +               gpio = <&gpio4 8 0>;

Please use GPIO_ACTIVE_HIGH here.


> +&i2c1 {
> +       clock-frequency = <100000>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c1>;
> +       status = "okay";
> +
> +       pmic: pfuze100@08 {

Please remove the leading 0, so this should be @8.

Please build it with W=1 and make sure it generates no warnings.

> +&iomuxc {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>;
> +
> +       pinctrl_hog0: hog0grp {
> +               pinmux = <
> +                       MX6SLL_PAD_KEY_ROW7__GPIO4_IO07
> +                       MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22
> +                       MX6SLL_PAD_KEY_COL3__GPIO3_IO30
> +                       MX6SLL_PAD_KEY_COL4__GPIO4_IO00
> +                       MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 /* SD3 CD */

I see no SD3 pinctrl entry. If this is related to SD3 card detection,
then it should be part of SD3 pinctrl instead of hog.


> +                       MX6SLL_PAD_KEY_COL6__GPIO4_IO04 /*SD3 RESET */

Same here.

> +                       MX6SLL_PAD_KEY_COL5__GPIO4_IO02
> +                       MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 /* HP DETECT */

Does HP mean head phone? If so, this should be part of audio pinctrl
instead of hog.


> +&usdhc1 {
> +       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +       pinctrl-0 = <&pinctrl_usdhc1_data>, <&pinctrl_usdhc1_clk>;
> +       pinctrl-1 = <&pinctrl_usdhc1_data_100mhz>, <&pinctrl_usdhc1_clk_100mhz>;
> +       pinctrl-2 = <&pinctrl_usdhc1_data_200mhz>, <&pinctrl_usdhc1_clk_200mhz>;
> +       cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
> +       wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> +       keep-power-in-suspend;
> +       enable-sdio-wakeup;

This property is deprecated as described in
Documentation/devicetree/bindings/mmc/mmc.txt.

Please use 'wakeup-source' instead.
Jacky Bai Feb. 7, 2018, 2:52 a.m. UTC | #2
> Subject: Re: [PATCH v3 2/2] ARM: dts: imx: Add basic dts support for imx6sll EVK
> board
> 
> On Wed, Feb 7, 2018 at 12:11 AM, Bai Ping <ping.bai@nxp.com> wrote:
> 
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6sll-evk.dts
> > @@ -0,0 +1,374 @@
> > +/*
> > + * Copyright 2016 Freescale Semiconductor, Inc.
> > + * Copyright 2017-2018 NXP.
> > + *
> > + * SPDX-License-Identifier: (GPL-2.0 OR MIT)
> 
> The SPDX line should be the first one and it should start with //
> 
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include "imx6sll.dtsi"
> > +
> > +/ {
> > +       model = "Freescale i.MX6SLL EVK Board";
> > +       compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
> > +
> > +       memory {
> 
> memory@80000000
> 
> > +               reg = <0x80000000 0x80000000>;
> 
> > +       reg_aud4v: reg-aud4v {
> > +               compatible = "regulator-fixed";
> > +               regulator-name = "wm8962-supply-4v2";
> > +               regulator-min-microvolt = <4325000>;
> > +               regulator-max-microvolt = <4325000>;
> > +               regulator-boot-on;
> > +       };
> > +
> > +       reg_lcd: reg-lcd {
> > +               compatible = "regulator-fixed";
> > +               regulator-name = "lcd-pwr";
> > +               gpio = <&gpio4 8 0>;
> 
> Please use GPIO_ACTIVE_HIGH here.
> 
> 
> > +&i2c1 {
> > +       clock-frequency = <100000>;
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_i2c1>;
> > +       status = "okay";
> > +
> > +       pmic: pfuze100@08 {
> 
> Please remove the leading 0, so this should be @8.
> 
> Please build it with W=1 and make sure it generates no warnings.
> 
> > +&iomuxc {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>;
> > +
> > +       pinctrl_hog0: hog0grp {
> > +               pinmux = <
> > +                       MX6SLL_PAD_KEY_ROW7__GPIO4_IO07
> > +                       MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22
> > +                       MX6SLL_PAD_KEY_COL3__GPIO3_IO30
> > +                       MX6SLL_PAD_KEY_COL4__GPIO4_IO00
> > +                       MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 /*
> SD3 CD
> > + */
> 
> I see no SD3 pinctrl entry. If this is related to SD3 card detection, then it should
> be part of SD3 pinctrl instead of hog.
> 
> 
> > +                       MX6SLL_PAD_KEY_COL6__GPIO4_IO04 /*SD3
> RESET */
> 
> Same here.
> 
> > +                       MX6SLL_PAD_KEY_COL5__GPIO4_IO02
> > +                       MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 /* HP
> DETECT
> > + */
> 
> Does HP mean head phone? If so, this should be part of audio pinctrl instead of
> hog.
> 
> 
> > +&usdhc1 {
> > +       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > +       pinctrl-0 = <&pinctrl_usdhc1_data>, <&pinctrl_usdhc1_clk>;
> > +       pinctrl-1 = <&pinctrl_usdhc1_data_100mhz>,
> <&pinctrl_usdhc1_clk_100mhz>;
> > +       pinctrl-2 = <&pinctrl_usdhc1_data_200mhz>,
> <&pinctrl_usdhc1_clk_200mhz>;
> > +       cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
> > +       wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> > +       keep-power-in-suspend;
> > +       enable-sdio-wakeup;
> 
> This property is deprecated as described in
> Documentation/devicetree/bindings/mmc/mmc.txt.
> 
> Please use 'wakeup-source' instead.

Thanks for review, will fix all.

BR
Jacky Bai
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index cdb9dd7..8a1baa2 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -53,6 +53,10 @@  i.MX6 Quad SABRE Automotive Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 
+i.MX6SLL EVK board
+Required root node properties:
+    - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
 Generic i.MX boards
 -------------------
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ade7a38..28bff8b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -505,6 +505,8 @@  dtb-$(CONFIG_SOC_IMX6Q) += \
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
new file mode 100644
index 0000000..e5a381a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -0,0 +1,374 @@ 
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: reg-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: reg-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_aud3v: reg-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: reg-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd: reg-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-pwr";
+		gpio = <&gpio4 8 0>;
+		enable-active-high;
+	};
+
+	reg_sd1_vmmc: reg-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>;
+
+	pinctrl_hog0: hog0grp {
+		pinmux = <
+			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07
+			MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 /* SD3 CD */
+			MX6SLL_PAD_KEY_COL6__GPIO4_IO04 /*SD3 RESET */
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 /* HP DETECT */
+		>;
+		slew-rate = <0x1>;
+		drive-strength = <0x3>;
+		fsl,pin-speed = <0x1>;
+		bias-pull-up = <0x1>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_hog1: hog1grp {
+		pinmux = <
+			/*
+			 * Must set the LVE of pad SD2_RESET, otherwise current
+			 * leakage through eMMC chip will pull high the VCCQ to
+			 * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
+			 */
+			MX6SLL_PAD_SD2_RESET__GPIO4_IO27
+		>;
+		slew-rate = <0x1>;
+		drive-strength = <0x3>;
+		fsl,pin-speed = <0x1>;
+		bias-pull-up = <0x1>;
+		input-schmitt-enable;
+		fsl,low-voltage-enable = <0x1>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		pinmux = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX
+		>;
+		slew-rate = <0x1>;
+		drive-strength = <0x6>;
+		fsl,pin-speed = <0x2>;
+		bias-pull-up = <0x2>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_usdhc1_data: usdhc1datagrp {
+		pinmux = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3
+		>;
+		slew-rate = <0x1>;
+		drive-strength = <0x4>;
+		fsl,pin-speed = <0x1>;
+		bias-pull-up = <0x1>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_usdhc1_clk: usdhc1clkgrp {
+		pinmux = <MX6SLL_PAD_SD1_CLK__SD1_CLK>;
+		slew-rate = <0x1>;
+		drive-strength = <0x4>;
+		fsl,pin-speed = <0x1>;
+		bias-pull-down = <0x0>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_usdhc1_data_100mhz: usdhc1datagrp_100mhz {
+		pinmux = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3
+		>;
+		slew-rate = <0x1>;
+		drive-strength = <0x4>;
+		fsl,pin-speed = <0x2>;
+		bias-pull-up = <0x1>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_usdhc1_clk_100mhz: usdhc1clkgrp_100mhz {
+		pinmux = < MX6SLL_PAD_SD1_CLK__SD1_CLK>;
+		slew-rate = <0x1>;
+		drive-strength = <0x4>;
+		fsl,pin-speed = <0x2>;
+		bias-pull-down = <0x0>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_usdhc1_data_200mhz: usdhc1datagrp_200mhz {
+		pinmux = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3
+		>;
+		slew-rate = <0x1>;
+		drive-strength = <0x5>;
+		fsl,pin-speed = <0x3>;
+		bias-pull-up = <0x1>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_usdhc1_clk_200mhz: usdhc1clkgrp_200mhz {
+		pinmux = <MX6SLL_PAD_SD1_CLK__SD1_CLK>;
+		slew-rate = <0x1>;
+		drive-strength = <0x7>;
+		fsl,pin-speed = <0x3>;
+		bias-pull-down = <0x0>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		pinmux = <MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID>;
+		slew-rate = <0x1>;
+		drive-strength = <0x3>;
+		fsl,pin-speed = <0x1>;
+		bias-pull-up = <0x1>;
+		input-schmitt-enable;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		pinmux = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA
+		>;
+		slew-rate = <0x1>;
+		drive-strength = <0x6>;
+		fsl,pin-speed = <0x2>;
+		drive-open-drain;
+		bias-pull-up = <0x2>;
+		input-schmitt-enable;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1_data>, <&pinctrl_usdhc1_clk>;
+	pinctrl-1 = <&pinctrl_usdhc1_data_100mhz>, <&pinctrl_usdhc1_clk_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_data_200mhz>, <&pinctrl_usdhc1_clk_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};