From patchwork Thu Feb 8 14:27:33 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 10207205 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id EA37760327 for ; Thu, 8 Feb 2018 14:30:22 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id A6B7129597 for ; Thu, 8 Feb 2018 14:30:22 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id A484229513; Thu, 8 Feb 2018 14:30:22 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-4.2 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,RCVD_IN_DNSWL_MED autolearn=unavailable version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [65.50.211.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 3B2EC29513 for ; Thu, 8 Feb 2018 14:30:11 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=Iv2wkfbT29ru+lNi6gT13yRDiEykLzz9cxhcAhmgG0o=; b=DPPn5JDs95ckN4 ognlIQ2N1igdPX5mrGj9jnrNmvM+CPWkUg1Mp+9798QYNY7nz/BDmwcyEp3fDwNRr/Hy6YQLJP5yU xL1lyCuEPee2lIGboi1649e6ZHXqWf/X7Xmk7KvtLIdWlUSe4Rm5AQugXam5Up7MrIZS7Stl33mO/ 8ithabCflnbKUHh3t4khe3D7MOdjpGdospOAIslUMMBu7WbFouDf7n06oM7GAqWr+5qgMSTLccLTV DgedBTRNUzH7JGPD9ZkN7w7HMmDsoSRgJ78BhhzvZ9Ius8MLBbqb1NlCjBYSbMvzIr4SAylJnFTqR A+AT9s1eAEUoKkKX6gYg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.89 #1 (Red Hat Linux)) id 1ejnDE-0002pB-87; Thu, 08 Feb 2018 14:30:08 +0000 Received: from mx07-00178001.pphosted.com ([62.209.51.94]) by bombadil.infradead.org with esmtps (Exim 4.89 #1 (Red Hat Linux)) id 1ejnBe-0000sV-Iu for linux-arm-kernel@lists.infradead.org; Thu, 08 Feb 2018 14:28:35 +0000 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id w18EO0g8018954; Thu, 8 Feb 2018 15:27:56 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2fxmgpsfy3-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 08 Feb 2018 15:27:56 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id BE4A331; Thu, 8 Feb 2018 14:27:55 +0000 (GMT) Received: from Webmail-eu.st.com (Safex1hubcas21.st.com [10.75.90.44]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 7FAFBA480; Thu, 8 Feb 2018 14:27:55 +0000 (GMT) Received: from SAFEX1HUBCAS22.st.com (10.75.90.92) by SAFEX1HUBCAS21.st.com (10.75.90.44) with Microsoft SMTP Server (TLS) id 14.3.352.0; Thu, 8 Feb 2018 15:27:55 +0100 Received: from localhost (10.201.20.5) by Webmail-ga.st.com (10.75.90.48) with Microsoft SMTP Server (TLS) id 14.3.352.0; Thu, 8 Feb 2018 15:27:54 +0100 From: Amelie Delaunay To: Lee Jones , Linus Walleij , Rob Herring , Mark Rutland , Russell King , "Alexandre Torgue" , Maxime Coquelin Subject: [PATCH 2/6] mfd: Add ST Multi-Function eXpander core driver Date: Thu, 8 Feb 2018 15:27:33 +0100 Message-ID: <1518100057-23234-3-git-send-email-amelie.delaunay@st.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1518100057-23234-1-git-send-email-amelie.delaunay@st.com> References: <1518100057-23234-1-git-send-email-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.201.20.5] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:, , definitions=2018-02-08_08:, , signatures=0 X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-gpio@vger.kernel.org, Amelie Delaunay , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP ST Multi-Function eXpander (MFX) is a slave controller using I2C for communication with the main MCU. Main features are: - 16 fast GPIOs individually configurable in input/output - 8 alternate GPIOs individually configurable in input/output - Main MCU IDD measurement - Resistive touchscreen controller Only GPIO expander (16 fast GPIOs + 8 alternate) feature is supported for the moment. Signed-off-by: Amelie Delaunay --- drivers/mfd/Kconfig | 15 ++ drivers/mfd/Makefile | 1 + drivers/mfd/st-mfx.c | 526 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/st-mfx.h | 116 ++++++++++ 4 files changed, 658 insertions(+) create mode 100644 drivers/mfd/st-mfx.c create mode 100644 include/linux/mfd/st-mfx.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1d20a80..e78e818 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1823,6 +1823,21 @@ config MFD_STM32_TIMERS for PWM and IIO Timer. This driver allow to share the registers between the others drivers. +config MFD_ST_MFX + bool "STMicroelectronics MFX" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Support for the STMicroelectronics Multi-Function eXpander. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. Currently available sub drivers are: + + GPIO: mfx-gpio + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index d9474ad..1379a18 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -230,3 +230,4 @@ obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o +obj-$(CONFIG_MFD_ST_MFX) += st-mfx.o diff --git a/drivers/mfd/st-mfx.c b/drivers/mfd/st-mfx.c new file mode 100644 index 0000000..5bee5d3 --- /dev/null +++ b/drivers/mfd/st-mfx.c @@ -0,0 +1,526 @@ +/* + * STMicroelectronics Multi-Function eXpander (ST-MFX) Core Driver + * + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved + * Author(s): Amelie Delaunay for STMicroelectronics. + * + * License terms: GPL V2.0. + * + * st-mfx Core Driver is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * st-mfx Core Driver is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License along with + * st-mfx Core Driver. If not, see . + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * struct mfx_priv - MFX MFD private structure + * @dev: device, mostly for logs + * @regmap: register map + * @mfx: MFX MFD public structure, to share information with subdrivers + * @irq_domain: IRQ domain + * @irq: IRQ number for mfx + * @irq_lock: IRQ bus lock + * @irqen: cache of IRQ_SRC_EN register for bus_lock + * @oldirqen: cache of IRQ_SRC_EN register for bus_lock + */ +struct mfx_priv { + struct device *dev; + struct regmap *regmap; + struct mfx mfx; + struct irq_domain *irq_domain; + int irq; + struct mutex irq_lock; /* IRQ bus lock */ + u8 irqen; + u8 oldirqen; +}; + +#define to_mfx_priv(_mfx) container_of(_mfx, struct mfx_priv, mfx) + +/* MFX boot time is around 10ms, so after reset, we have to wait this delay */ +#define MFX_BOOT_TIME 10 + +static u8 mfx_blocks_to_mask(u32 blocks) +{ + u8 mask = 0; + + if (blocks & MFX_BLOCK_GPIO) + mask |= MFX_REG_SYS_CTRL_GPIO_EN; + else + mask &= ~MFX_REG_SYS_CTRL_GPIO_EN; + + if (blocks & MFX_BLOCK_TS) + mask |= MFX_REG_SYS_CTRL_TS_EN; + else + mask &= ~MFX_REG_SYS_CTRL_TS_EN; + + if (blocks & MFX_BLOCK_IDD) + mask |= MFX_REG_SYS_CTRL_IDD_EN; + else + mask &= ~MFX_REG_SYS_CTRL_IDD_EN; + + if (blocks & MFX_BLOCK_ALTGPIO) + mask |= MFX_REG_SYS_CTRL_ALTGPIO_EN; + else + mask &= ~MFX_REG_SYS_CTRL_ALTGPIO_EN; + + return mask; +} + +static int mfx_reset(struct mfx *mfx) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + int ret; + + ret = regmap_update_bits(mfx_priv->regmap, MFX_REG_SYS_CTRL, + MFX_REG_SYS_CTRL_SWRST, + MFX_REG_SYS_CTRL_SWRST); + + if (ret < 0) + return ret; + + msleep(MFX_BOOT_TIME); + + return ret; +} + +int mfx_block_read(struct mfx *mfx, u8 reg, u8 length, u8 *values) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + + return regmap_bulk_read(mfx_priv->regmap, reg, values, length); +} +EXPORT_SYMBOL_GPL(mfx_block_read); + +int mfx_block_write(struct mfx *mfx, u8 reg, u8 length, const u8 *values) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + + return regmap_bulk_write(mfx_priv->regmap, reg, values, length); +} +EXPORT_SYMBOL_GPL(mfx_block_write); + +int mfx_reg_read(struct mfx *mfx, u8 reg) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + u32 val; + int ret; + + ret = regmap_read(mfx_priv->regmap, reg, &val); + + return ret ? ret : val; +} +EXPORT_SYMBOL_GPL(mfx_reg_read); + +int mfx_reg_write(struct mfx *mfx, u8 reg, u8 val) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + + return regmap_write(mfx_priv->regmap, reg, val); +} +EXPORT_SYMBOL_GPL(mfx_reg_write); + +int mfx_set_bits(struct mfx *mfx, u8 reg, u8 mask, u8 val) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + + return regmap_update_bits(mfx_priv->regmap, reg, mask, val); +} +EXPORT_SYMBOL_GPL(mfx_set_bits); + +int mfx_enable(struct mfx *mfx, u32 blocks) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + u8 mask = mfx_blocks_to_mask(blocks); + + return regmap_update_bits(mfx_priv->regmap, MFX_REG_SYS_CTRL, + mask, mask); +} +EXPORT_SYMBOL_GPL(mfx_enable); + +int mfx_disable(struct mfx *mfx, u32 blocks) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(mfx); + u8 mask = mfx_blocks_to_mask(blocks); + + return regmap_update_bits(mfx_priv->regmap, MFX_REG_SYS_CTRL, + mask, 0); +} +EXPORT_SYMBOL_GPL(mfx_disable); + +static void mfx_irq_lock(struct irq_data *data) +{ + struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data); + + mutex_lock(&mfx_priv->irq_lock); +} + +static void mfx_irq_sync_unlock(struct irq_data *data) +{ + struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data); + u8 new = mfx_priv->irqen; + u8 old = mfx_priv->oldirqen; + + if (new == old) + goto unlock; + + mfx_priv->oldirqen = new; + mfx_reg_write(&mfx_priv->mfx, MFX_REG_IRQ_SRC_EN, new); +unlock: + mutex_unlock(&mfx_priv->irq_lock); +} + +static void mfx_irq_mask(struct irq_data *data) +{ + struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data); + + mfx_priv->irqen &= ~BIT(data->hwirq % 8); +} + +static void mfx_irq_unmask(struct irq_data *data) +{ + struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data); + + mfx_priv->irqen |= BIT(data->hwirq % 8); +} + +static struct irq_chip mfx_irq_chip = { + .name = "mfx", + .irq_bus_lock = mfx_irq_lock, + .irq_bus_sync_unlock = mfx_irq_sync_unlock, + .irq_mask = mfx_irq_mask, + .irq_unmask = mfx_irq_unmask, +}; + +static irqreturn_t mfx_irq(int irq, void *data) +{ + struct mfx_priv *mfx_priv = data; + unsigned long status, bit; + u8 ack; + int ret; + + ret = mfx_reg_read(&mfx_priv->mfx, MFX_REG_IRQ_PENDING); + if (ret < 0) { + dev_err(mfx_priv->dev, "can't get IRQ_PENDING: %d\n", ret); + return IRQ_NONE; + } + + /* It can be GPIO, IDD, ERROR, TS* IRQs */ + status = ret & mfx_priv->irqen; + + /* + * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR + * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3 + */ + ack = status & ~MFX_REG_IRQ_PENDING_GPIO; + + for_each_set_bit(bit, &status, 8) + handle_nested_irq(irq_find_mapping(mfx_priv->irq_domain, bit)); + + if (ack) + mfx_reg_write(&mfx_priv->mfx, MFX_REG_IRQ_ACK, ack); + + return IRQ_HANDLED; +} + +static int mfx_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + struct mfx_priv *mfx_priv = d->host_data; + + irq_set_chip_data(virq, mfx_priv); + irq_set_chip(virq, &mfx_irq_chip); + irq_set_nested_thread(virq, 1); + irq_set_parent(virq, mfx_priv->irq); + irq_set_noprobe(virq); + + return 0; +} + +static void mfx_irq_unmap(struct irq_domain *d, unsigned int virq) +{ + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static const struct irq_domain_ops mfx_irq_ops = { + .map = mfx_irq_map, + .unmap = mfx_irq_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int mfx_irq_init(struct mfx_priv *mfx_priv, struct device_node *np) +{ + int irqoutpin = MFX_REG_IRQ_OUT_PIN_TYPE; /* Push-Pull */ + int irqtrigger, ret; + + mfx_priv->irq = of_irq_get(np, 0); + if (mfx_priv->irq > 0) { + irqtrigger = irq_get_trigger_type(mfx_priv->irq); + } else { + dev_err(mfx_priv->dev, "failed to get irq: %d\n", + mfx_priv->irq); + return mfx_priv->irq; + } + + if ((irqtrigger & IRQ_TYPE_EDGE_FALLING) || + (irqtrigger & IRQ_TYPE_LEVEL_LOW)) + irqoutpin &= ~MFX_REG_IRQ_OUT_PIN_POL; /* Active Low */ + else + irqoutpin |= MFX_REG_IRQ_OUT_PIN_POL; /* Active High */ + + mfx_reg_write(&mfx_priv->mfx, MFX_REG_IRQ_OUT_PIN, irqoutpin); + + mfx_priv->irq_domain = irq_domain_add_linear(np, MFX_IRQ_SRC_NR, + &mfx_irq_ops, mfx_priv); + if (!mfx_priv->irq_domain) { + dev_err(mfx_priv->dev, "failed to create irq domain\n"); + return -ENOMEM; + } + + ret = devm_request_threaded_irq(mfx_priv->dev, mfx_priv->irq, + NULL, mfx_irq, + irqtrigger | IRQF_ONESHOT, "mfx", + mfx_priv); + if (ret) { + dev_err(mfx_priv->dev, "failed to request irq: %d\n", ret); + irq_domain_remove(mfx_priv->irq_domain); + return ret; + } + + return 0; +} + +static void mfx_irq_remove(struct mfx_priv *mfx_priv) +{ + int hwirq; + + for (hwirq = 0; hwirq < MFX_IRQ_SRC_NR; hwirq++) + irq_dispose_mapping(irq_find_mapping(mfx_priv->irq_domain, + hwirq)); + irq_domain_remove(mfx_priv->irq_domain); +} + +static int mfx_chip_init(struct mfx_priv *mfx_priv, u16 i2c_addr) +{ + struct mfx *mfx = &mfx_priv->mfx; + int ret; + int id; + u8 version[2]; + + id = mfx_reg_read(mfx, MFX_REG_CHIP_ID); + if (id < 0) { + dev_err(mfx_priv->dev, "error reading chip id: %d\n", id); + return id; + } + + ret = mfx_block_read(mfx, MFX_REG_FW_VERSION_MSB, + ARRAY_SIZE(version), version); + if (ret < 0) { + dev_err(mfx_priv->dev, "error reading fw version: %d\n", ret); + return ret; + } + + /* + * Check that ID is the complement of the I2C address: + * MFX I2C address follows the 7-bit format (MSB), that's why + * i2c_addr is shifted. + * + * MFX_I2C_ADDR | MFX | Linux + * input pin | I2C device address | I2C device address + *-------------------------------------------------------- + * 0 | b: 1000 010x h:0x84 | 0x42 + * 1 | b: 1000 011x h:0x86 | 0x43 + */ + if (FIELD_GET(MFX_REG_CHIP_ID_MASK, ~id) != (i2c_addr << 1)) { + dev_err(mfx_priv->dev, "unknown chip id: %#x\n", id); + return -EINVAL; + } + + dev_info(mfx_priv->dev, "ST-MFX chip id: %#x, fw version: %x.%02x\n", + id, version[0], version[1]); + + /* Disable all features, subdrivers should enable what they need */ + ret = mfx_disable(mfx, ~0); + if (ret) + return ret; + + return mfx_reset(mfx); +} + +static const struct regmap_config mfx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static const struct of_device_id mfx_of_match[] = { + { .compatible = "st,mfx" }, + { } +}; +MODULE_DEVICE_TABLE(of, mfx_of_match); + +static int mfx_of_probe(struct device_node *np, struct mfx_priv *mfx_priv) +{ + struct device_node *child; + + if (!np) + return -ENODEV; + + for_each_child_of_node(np, child) { + if (of_device_is_compatible(child, "st,mfx-gpio")) { + mfx_priv->mfx.blocks |= MFX_BLOCK_GPIO; + mfx_priv->mfx.num_gpio = 16; + } + /* + * Here we could find other children like "st,mfx-ts" or + * "st,mfx-idd. + */ + } + + if (!(mfx_priv->mfx.blocks & MFX_BLOCK_TS) && + !(mfx_priv->mfx.blocks & MFX_BLOCK_IDD)) { + mfx_priv->mfx.blocks |= MFX_BLOCK_ALTGPIO; + mfx_priv->mfx.num_gpio += 8; + } + + /* + * TODO: aGPIO[3:0] and aGPIO[7:4] can be used independently: + * - if IDD is used but not TS, aGPIO[3:0] can be used as GPIO, + * - if TS is used but not IDD: aGPIO[7:4] can be used as GPIO. + */ + + return of_platform_populate(np, NULL, NULL, mfx_priv->dev); +} + +int mfx_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device_node *np = client->dev.of_node; + struct mfx_priv *mfx_priv; + int ret; + + mfx_priv = devm_kzalloc(&client->dev, sizeof(struct mfx_priv), + GFP_KERNEL); + if (!mfx_priv) + return -ENOMEM; + + mfx_priv->regmap = devm_regmap_init_i2c(client, &mfx_regmap_config); + if (IS_ERR(mfx_priv->regmap)) { + ret = PTR_ERR(mfx_priv->regmap); + dev_err(&client->dev, "failed to allocate register map: %d\n", + ret); + return ret; + } + + mfx_priv->dev = &client->dev; + i2c_set_clientdata(client, &mfx_priv->mfx); + + mutex_init(&mfx_priv->irq_lock); + + ret = mfx_chip_init(mfx_priv, client->addr); + if (ret) { + if (ret == -ETIMEDOUT) + return -EPROBE_DEFER; + + return ret; + } + + ret = mfx_irq_init(mfx_priv, np); + if (ret < 0) + return ret; + + ret = mfx_of_probe(np, mfx_priv); + if (ret < 0) + return ret; + + dev_info(mfx_priv->dev, "ST-MFX (CORE) initialized\n"); + + return 0; +} + +static int mfx_remove(struct i2c_client *client) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(i2c_get_clientdata(client)); + + mfx_irq_remove(mfx_priv); + of_platform_depopulate(mfx_priv->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mfx_suspend(struct device *dev) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(dev_get_drvdata(dev)); + + if (device_may_wakeup(dev)) + enable_irq_wake(mfx_priv->irq); + + /* + * TODO: Do we put MFX in STANDBY mode ? + * (Wakeup by rising edge on MFX_wakeup pin) + */ + + return 0; +} + +static int mfx_resume(struct device *dev) +{ + struct mfx_priv *mfx_priv = to_mfx_priv(dev_get_drvdata(dev)); + + if (device_may_wakeup(dev)) + disable_irq_wake(mfx_priv->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mfx_dev_pm_ops, mfx_suspend, mfx_resume); + +static const struct i2c_device_id mfx_i2c_id[] = { + { "mfx", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, mfx_id); + +static struct i2c_driver mfx_driver = { + .driver = { + .name = "st-mfx", + .pm = &mfx_dev_pm_ops, + .of_match_table = mfx_of_match, + }, + .probe = mfx_probe, + .remove = mfx_remove, + .id_table = mfx_i2c_id, +}; + +static int __init mfx_init(void) +{ + return i2c_add_driver(&mfx_driver); +} +subsys_initcall(mfx_init); + +static void __exit mfx_exit(void) +{ + i2c_del_driver(&mfx_driver); +} +module_exit(mfx_exit); + +MODULE_DESCRIPTION("STMicroelectronics Multi-Function eXpander MFD core driver"); +MODULE_AUTHOR("Amelie Delaunay "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/st-mfx.h b/include/linux/mfd/st-mfx.h new file mode 100644 index 0000000..1bf7e65 --- /dev/null +++ b/include/linux/mfd/st-mfx.h @@ -0,0 +1,116 @@ +/* + * STMicroelectronics Multi-Function eXpander (ST-MFX) + * + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved + * Author(s): Amelie Delaunay for STMicroelectronics. + * + * License terms: GPL V2.0. + * + * st-mfx is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * st-mfx is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License along with + * st-mfx. If not, see . + */ + +#ifndef __MFD_ST_MFX_H +#define __MFD_ST_MFX_H + +enum mfx_block { + MFX_BLOCK_GPIO = BIT(0), + MFX_BLOCK_TS = BIT(1), + MFX_BLOCK_IDD = BIT(2), + MFX_BLOCK_ALTGPIO = BIT(3), +}; + +/* + * 8 events can activate the MFX_IRQ_OUT signal, + * but for the moment, only GPIO event is used + */ +enum mfx_irq { + MFX_IRQ_SRC_GPIO, + + MFX_IRQ_SRC_NR, +}; + +/** + * struct mfx - MFX MFD structure + * @blocks: mask of mfx_block to be enabled + * @num_gpio: number of gpios + */ +struct mfx { + u32 blocks; + u32 num_gpio; +}; + +int mfx_reg_write(struct mfx *mfx, u8 reg, u8 data); +int mfx_reg_read(struct mfx *mfx, u8 reg); +int mfx_block_read(struct mfx *mfx, u8 reg, u8 length, u8 *values); +int mfx_block_write(struct mfx *mfx, u8 reg, u8 length, const u8 *values); +int mfx_set_bits(struct mfx *mfx, u8 reg, u8 mask, u8 val); +int mfx_enable(struct mfx *mfx, unsigned int blocks); +int mfx_disable(struct mfx *mfx, unsigned int blocks); + +/* General */ +#define MFX_REG_CHIP_ID 0x00 /* R */ +#define MFX_REG_FW_VERSION_MSB 0x01 /* R */ +#define MFX_REG_FW_VERSION_LSB 0x02 /* R */ +#define MFX_REG_SYS_CTRL 0x40 /* RW */ +/* IRQ output management */ +#define MFX_REG_IRQ_OUT_PIN 0x41 /* RW */ +#define MFX_REG_IRQ_SRC_EN 0x42 /* RW */ +#define MFX_REG_IRQ_PENDING 0x08 /* R */ +#define MFX_REG_IRQ_ACK 0x44 /* RW */ +/* GPIOs expander */ +/* GPIO_STATE1 0x10, GPIO_STATE2 0x11, GPIO_STATE3 0x12 */ +#define MFX_REG_GPIO_STATE 0x10 /* R */ +/* GPIO_DIR1 0x60, GPIO_DIR2 0x61, GPIO_DIR3 0x63 */ +#define MFX_REG_GPIO_DIR 0x60 /* RW */ +/* GPIO_TYPE1 0x64, GPIO_TYPE2 0x65, GPIO_TYPE3 0x66 */ +#define MFX_REG_GPIO_TYPE 0x64 /* RW */ +/* GPIO_PUPD1 0x68, GPIO_PUPD2 0x69, GPIO_PUPD3 0x6A */ +#define MFX_REG_GPIO_PUPD 0x68 /* RW */ +/* GPO_SET1 0x6C, GPO_SET2 0x6D, GPO_SET3 0x6E */ +#define MFX_REG_GPO_SET 0x6C /* RW */ +/* GPO_CLR1 0x70, GPO_CLR2 0x71, GPO_CLR3 0x72 */ +#define MFX_REG_GPO_CLR 0x70 /* RW */ +/* IRQ_GPI_SRC1 0x48, IRQ_GPI_SRC2 0x49, IRQ_GPI_SRC3 0x4A */ +#define MFX_REG_IRQ_GPI_SRC 0x48 /* RW */ +/* IRQ_GPI_EVT1 0x4C, IRQ_GPI_EVT2 0x4D, IRQ_GPI_EVT3 0x4E */ +#define MFX_REG_IRQ_GPI_EVT 0x4C /* RW */ +/* IRQ_GPI_TYPE1 0x50, IRQ_GPI_TYPE2 0x51, IRQ_GPI_TYPE3 0x52 */ +#define MFX_REG_IRQ_GPI_TYPE 0x50 /* RW */ +/* IRQ_GPI_PENDING1 0x0C, IRQ_GPI_PENDING2 0x0D, IRQ_GPI_PENDING3 0x0E*/ +#define MFX_REG_IRQ_GPI_PENDING 0x0C /* R */ +/* IRQ_GPI_ACK1 0x54, IRQ_GPI_ACK2 0x55, IRQ_GPI_ACK3 0x56 */ +#define MFX_REG_IRQ_GPI_ACK 0x54 /* RW */ + +/* MFX_REG_CHIP_ID bitfields */ +#define MFX_REG_CHIP_ID_MASK GENMASK(7, 0) + +/* MFX_REG_SYS_CTRL bitfields */ +#define MFX_REG_SYS_CTRL_GPIO_EN BIT(0) +#define MFX_REG_SYS_CTRL_TS_EN BIT(1) +#define MFX_REG_SYS_CTRL_IDD_EN BIT(2) +#define MFX_REG_SYS_CTRL_ALTGPIO_EN BIT(3) +#define MFX_REG_SYS_CTRL_STANDBY BIT(6) +#define MFX_REG_SYS_CTRL_SWRST BIT(7) + +/* MFX_REG_IRQ_OUT_PIN bitfields */ +#define MFX_REG_IRQ_OUT_PIN_TYPE BIT(0) /* 0-OD 1-PP */ +#define MFX_REG_IRQ_OUT_PIN_POL BIT(1) /* 0-active LOW 1-active HIGH */ + +/* MFX_REG_IRQ_SRC_EN bitfields */ +#define MFX_REG_IRQ_SRC_EN_GPIO BIT(0) + +/* MFX_REG_IRQ_PENDING bitfields */ +#define MFX_REG_IRQ_PENDING_GPIO BIT(0) + +#endif /* __MFD_ST_MFX_H */ +