diff mbox

[v10,2/3] NPCM750: add clock tree doc and binding

Message ID 1519553539-15899-3-git-send-email-tali.perry1@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tali Perry Feb. 25, 2018, 10:12 a.m. UTC 
Signed-off-by: Tali Perry <tali.perry1@gmail.com>

---
 .../bindings/clock/nuvoton,npcm750-clk.txt         | 100 +++++++++++++++++++++
 include/dt-bindings/clock/nuvoton,npcm7xx-clock.h  |  44 +++++++++
 2 files changed, 144 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
 create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clock.h

Comments

Rob Herring (Arm) March 2, 2018, 10:12 p.m. UTC | #1 
On Sun, Feb 25, 2018 at 12:12:18PM +0200, Tali Perry wrote:
> 
Need a commit msg.

The subject should be "dt-bindings: clock: ..."

> Signed-off-by: Tali Perry <tali.perry1@gmail.com>
> 
> ---
>  .../bindings/clock/nuvoton,npcm750-clk.txt         | 100 +++++++++++++++++++++
>  include/dt-bindings/clock/nuvoton,npcm7xx-clock.h  |  44 +++++++++
>  2 files changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
>  create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
> new file mode 100644
> index 000000000000..dd17b86bd577
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
> @@ -0,0 +1,100 @@
> +* Nuvoton NPCM7XX Clock Controller
> +
> +Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
> +generates and supplies clocks to all modules within the BMC.
> +
> +External clocks:
> +
> +There are six fixed clocks that are generated outside the BMC. All clocks are of
> +a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
> +clk_sysbypck are inputs to the clock controller.
> +clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
> +network. They are set on the device tree, but not used by the clock module. The
> +network devices use them directly.
> +Example can be found below.
> +
> +All available clocks are defined as preprocessor macros in:
> +dt-bindings/clock/nuvoton,npcm7xx-clock.h
> +and can be reused as DT sources.
> +
> +Required Properties of clock controller:
> +
> +	- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
> +		  Poleg BMC NPCM750
> +
> +	- reg: physical base address of the clock controller and length of
> +		memory mapped region.
> +
> +	- #clock-cells: should be 1.
> +
> +Example: Clock controller node:
> +
> +	clk: clock-controller@f0801000 {
> +		compatible = "nuvoton,npcm750-clk";
> +		#clock-cells = <1>;
> +		reg = <0xf0801000 0x1000>;
> +		clock-names = "refclk", "sysbypck", "mcbypck";
> +		clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
> +	};
> +
> +Example: Required external clocks for network:
> +
> +	/* external reference clock */
> +	clk_refclk: clk-refclk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +		clock-output-names = "refclk";
> +	};
> +
> +	/* external reference clock for cpu. float in normal operation */
> +	clk_sysbypck: clk-sysbypck {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <800000000>;
> +		clock-output-names = "sysbypck";
> +	};
> +
> +	/* external reference clock for MC. float in normal operation */
> +	clk_mcbypck: clk-mcbypck {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <800000000>;
> +		clock-output-names = "mcbypck";
> +	};
> +
> +	 /* external clock signal rg1refck, supplied by the phy */
> +	clk_rg1refck: clk-rg1refck {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <125000000>;
> +		clock-output-names = "clk_rg1refck";
> +	};
> +
> +	 /* external clock signal rg2refck, supplied by the phy */
> +	clk_rg2refck: clk-rg2refck {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <125000000>;
> +		clock-output-names = "clk_rg2refck";
> +	};
> +
> +	clk_xin: clk-xin {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +		clock-output-names = "clk_xin";
> +	};
> +
> +
> +Example: GMAC controller node that consumes two clocks: a generated clk by the
> +clock controller and a fixed clock from DT (clk_rg1refck).
> +
> +	ethernet0: eth@f0802000 {

ethernet@...

> +		compatible = "snps,dwmac";
> +		reg = <0xf0802000 0x2000>;
> +		interrupts = <0 14 4>;
> +		interrupt-names = "macirq";
> +		clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
> +		clock-names = "stmmaceth", "clk_gmac";
> +	};
> diff --git a/include/dt-bindings/clock/nuvoton,npcm7xx-clock.h b/include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
> new file mode 100644
> index 000000000000..f21522605b94
> --- /dev/null
> +++ b/include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
> @@ -0,0 +1,44 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Nuvoton NPCM7xx Clock Generator binding
> + * clock binding number for all clocks supportted by nuvoton,npcm7xx-clk
> + *
> + * Copyright (C) 2018 Nuvoton Technologies tali.perry@nuvoton.com
> + *
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_NPCM7XX_H
> +#define __DT_BINDINGS_CLOCK_NPCM7XX_H
> +
> +
> +#define NPCM7XX_CLK_CPU 0
> +#define NPCM7XX_CLK_GFX_PIXEL 1
> +#define NPCM7XX_CLK_MC 2
> +#define NPCM7XX_CLK_ADC 3
> +#define NPCM7XX_CLK_AHB 4
> +#define NPCM7XX_CLK_TIMER 5
> +#define NPCM7XX_CLK_UART 6
> +#define NPCM7XX_CLK_MMC  7
> +#define NPCM7XX_CLK_SPI3 8
> +#define NPCM7XX_CLK_PCI  9
> +#define NPCM7XX_CLK_AXI 10
> +#define NPCM7XX_CLK_APB4 11
> +#define NPCM7XX_CLK_APB3 12
> +#define NPCM7XX_CLK_APB2 13
> +#define NPCM7XX_CLK_APB1 14
> +#define NPCM7XX_CLK_APB5 15
> +#define NPCM7XX_CLK_CLKOUT 16
> +#define NPCM7XX_CLK_GFX  17
> +#define NPCM7XX_CLK_SU   18
> +#define NPCM7XX_CLK_SU48 19
> +#define NPCM7XX_CLK_SDHC 20
> +#define NPCM7XX_CLK_SPI0 21
> +#define NPCM7XX_CLK_SPIX 22
> +
> +#define NPCM7XX_CLK_REFCLK 23
> +#define NPCM7XX_CLK_SYSBYPCK 24
> +#define NPCM7XX_CLK_MCBYPCK 25
> +
> +#define NPCM7XX_NUM_CLOCKS	 (NPCM7XX_CLK_MCBYPCK+1)
> +
> +#endif
> -- 
> 2.14.1
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
new file mode 100644
index 000000000000..dd17b86bd577
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
@@ -0,0 +1,100 @@ 
+* Nuvoton NPCM7XX Clock Controller
+
+Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
+generates and supplies clocks to all modules within the BMC.
+
+External clocks:
+
+There are six fixed clocks that are generated outside the BMC. All clocks are of
+a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
+clk_sysbypck are inputs to the clock controller.
+clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
+network. They are set on the device tree, but not used by the clock module. The
+network devices use them directly.
+Example can be found below.
+
+All available clocks are defined as preprocessor macros in:
+dt-bindings/clock/nuvoton,npcm7xx-clock.h
+and can be reused as DT sources.
+
+Required Properties of clock controller:
+
+	- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
+		  Poleg BMC NPCM750
+
+	- reg: physical base address of the clock controller and length of
+		memory mapped region.
+
+	- #clock-cells: should be 1.
+
+Example: Clock controller node:
+
+	clk: clock-controller@f0801000 {
+		compatible = "nuvoton,npcm750-clk";
+		#clock-cells = <1>;
+		reg = <0xf0801000 0x1000>;
+		clock-names = "refclk", "sysbypck", "mcbypck";
+		clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+	};
+
+Example: Required external clocks for network:
+
+	/* external reference clock */
+	clk_refclk: clk-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "refclk";
+	};
+
+	/* external reference clock for cpu. float in normal operation */
+	clk_sysbypck: clk-sysbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "sysbypck";
+	};
+
+	/* external reference clock for MC. float in normal operation */
+	clk_mcbypck: clk-mcbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "mcbypck";
+	};
+
+	 /* external clock signal rg1refck, supplied by the phy */
+	clk_rg1refck: clk-rg1refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg1refck";
+	};
+
+	 /* external clock signal rg2refck, supplied by the phy */
+	clk_rg2refck: clk-rg2refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg2refck";
+	};
+
+	clk_xin: clk-xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clk_xin";
+	};
+
+
+Example: GMAC controller node that consumes two clocks: a generated clk by the
+clock controller and a fixed clock from DT (clk_rg1refck).
+
+	ethernet0: eth@f0802000 {
+		compatible = "snps,dwmac";
+		reg = <0xf0802000 0x2000>;
+		interrupts = <0 14 4>;
+		interrupt-names = "macirq";
+		clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+		clock-names = "stmmaceth", "clk_gmac";
+	};
diff --git a/include/dt-bindings/clock/nuvoton,npcm7xx-clock.h b/include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
new file mode 100644
index 000000000000..f21522605b94
--- /dev/null
+++ b/include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
@@ -0,0 +1,44 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Nuvoton NPCM7xx Clock Generator binding
+ * clock binding number for all clocks supportted by nuvoton,npcm7xx-clk
+ *
+ * Copyright (C) 2018 Nuvoton Technologies tali.perry@nuvoton.com
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NPCM7XX_H
+#define __DT_BINDINGS_CLOCK_NPCM7XX_H
+
+
+#define NPCM7XX_CLK_CPU 0
+#define NPCM7XX_CLK_GFX_PIXEL 1
+#define NPCM7XX_CLK_MC 2
+#define NPCM7XX_CLK_ADC 3
+#define NPCM7XX_CLK_AHB 4
+#define NPCM7XX_CLK_TIMER 5
+#define NPCM7XX_CLK_UART 6
+#define NPCM7XX_CLK_MMC  7
+#define NPCM7XX_CLK_SPI3 8
+#define NPCM7XX_CLK_PCI  9
+#define NPCM7XX_CLK_AXI 10
+#define NPCM7XX_CLK_APB4 11
+#define NPCM7XX_CLK_APB3 12
+#define NPCM7XX_CLK_APB2 13
+#define NPCM7XX_CLK_APB1 14
+#define NPCM7XX_CLK_APB5 15
+#define NPCM7XX_CLK_CLKOUT 16
+#define NPCM7XX_CLK_GFX  17
+#define NPCM7XX_CLK_SU   18
+#define NPCM7XX_CLK_SU48 19
+#define NPCM7XX_CLK_SDHC 20
+#define NPCM7XX_CLK_SPI0 21
+#define NPCM7XX_CLK_SPIX 22
+
+#define NPCM7XX_CLK_REFCLK 23
+#define NPCM7XX_CLK_SYSBYPCK 24
+#define NPCM7XX_CLK_MCBYPCK 25
+
+#define NPCM7XX_NUM_CLOCKS	 (NPCM7XX_CLK_MCBYPCK+1)
+
+#endif