[v4,05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi

Commit Message

Sricharan Ramabadhran March 22, 2018, 12:58 p.m. UTC

Add the common parts for the dk04 boards.

Reviewed-by: Abhishek Sahu <[e-mail]>
Signed-off-by: Sricharan R <[e-mail]>
---
 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 115 ++++++++++++++++++++++++++
 arch/arm/boot/dts/qcom-ipq4019.dtsi           |   2 +-
 2 files changed, 116 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
new file mode 100644
index 0000000..7c5d717
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -0,0 +1,115 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+	compatible = "qcom,ipq4019";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial0_pinmux {
+				mux {
+					pins = "gpio16", "gpio17";
+					function = "blsp_uart0";
+					bias-disable;
+				};
+			};
+
+			serial_1_pins: serial1_pinmux {
+				mux {
+					pins = "gpio8", "gpio9",
+						"gpio10", "gpio11";
+					function = "blsp_uart1";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+
+			i2c_0_pins: i2c_0_pinmux {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "blsp_i2c0";
+					bias-disable;
+				};
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio53", "gpio55", "gpio56",
+						"gpio57", "gpio58", "gpio59",
+						"gpio60", "gpio62", "gpio63",
+						"gpio64", "gpio65", "gpio66",
+						"gpio67", "gpio68", "gpio69";
+					function = "qpic";
+				};
+			};
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma@7884000 {
+			status = "ok";
+		};
+
+		spi@78b5000 { /* BLSP1 QUP1 */
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		pci@40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 1c3b0ff..41a213a 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -307,7 +307,7 @@ 
 			dma-names = "rx", "tx";
 		};
 
-		serial@78b0000 {
+		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;
 			interrupts = <0 108 0>;