| Message ID | 1522265176-33226-7-git-send-email-biju.das@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Mar 28, 2018 at 08:26:14PM +0100, Biju Das wrote: > The initial R8A77470 SoC device tree including CPU0, GIC, timer, SYSC, RST, > CPG, and the required clock descriptions. > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > V1->V2: > * Incorporated geert's review comment > * Moved prr node inside soc node. > > arch/arm/boot/dts/r8a77470.dtsi | 155 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 155 insertions(+) > create mode 100644 arch/arm/boot/dts/r8a77470.dtsi > > diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi > new file mode 100644 > index 0000000..f096419 > --- /dev/null > +++ b/arch/arm/boot/dts/r8a77470.dtsi > @@ -0,0 +1,155 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for the r8a77470 SoC > + * > + * Copyright (C) 2018 Renesas Electronics Corp. > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/r8a77470-cpg-mssr.h> > +#include <dt-bindings/power/r8a77470-sysc.h> As requested by Geert in his review of v1, please use numerical values for the initial submission as the dt-bindings headers and the DTS files go upstream through different maintainer paths. In other words, please do not include r8a77470-cpg-mssr.h or r8a77470-sysc.h in the initial submission of this file as those header files will not be present and there will be a build failure. Rather, please use numeric values for now and, as a follow-up in the v4.19 development cycle, provide a patch to use the headers. > +/ { > + compatible = "renesas,r8a77470"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0>; > + clock-frequency = <1000000000>; > + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; > + power-domains = <&sysc R8A77470_PD_CA7_CPU0>; > + next-level-cache = <&L2_CA7>; > + }; > + > + > + L2_CA7: cache-controller-0 { > + compatible = "cache"; > + cache-unified; > + cache-level = <2>; > + power-domains = <&sysc R8A77470_PD_CA7_SCU>; > + }; > + }; > + > + /* External root clock */ > + extal_clk: extal { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + /* This value must be overridden by the board. */ > + clock-frequency = <0>; > + }; > + > + /* External SCIF clock */ > + scif_clk: scif { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + /* This value must be overridden by the board. */ > + clock-frequency = <0>; > + }; > + > + soc { > + compatible = "simple-bus"; > + interrupt-parent = <&gic>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + cpg: clock-controller@e6150000 { > + compatible = "renesas,r8a77470-cpg-mssr"; > + reg = <0 0xe6150000 0 0x1000>; > + clocks = <&extal_clk>, <&usb_extal_clk>; > + clock-names = "extal", "usb_extal"; > + #clock-cells = <2>; > + #power-domain-cells = <0>; > + #reset-cells = <1>; > + }; > + > + rst: reset-controller@e6160000 { > + compatible = "renesas,r8a77470-rst"; > + reg = <0 0xe6160000 0 0x100>; > + }; > + > + sysc: system-controller@e6180000 { > + compatible = "renesas,r8a77470-sysc"; > + reg = <0 0xe6180000 0 0x200>; > + #power-domain-cells = <1>; > + }; > + > + icram0: sram@e63a0000 { > + compatible = "mmio-sram"; > + reg = <0 0xe63a0000 0 0x12000>; > + }; > + > + icram1: sram@e63c0000 { > + compatible = "mmio-sram"; > + reg = <0 0xe63c0000 0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0xe63c0000 0x1000>; > + > + smp-sram@0 { > + compatible = "renesas,smp-sram"; > + reg = <0 0x100>; > + }; > + }; > + > + icram2: sram@e6300000 { > + compatible = "mmio-sram"; > + reg = <0 0xe6300000 0 0x20000>; > + }; > + > + scif1: serial@e6e68000 { > + compatible = "renesas,scif-r8a77470", > + "renesas,rcar-gen2-scif", "renesas,scif"; > + reg = <0 0xe6e68000 0 0x40>; > + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 720>, > + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; > + clock-names = "fck", "brg_int", "scif_clk"; > + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; > + resets = <&cpg 720>; > + status = "disabled"; > + }; > + > + gic: interrupt-controller@f1001000 { > + compatible = "arm,gic-400"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + interrupt-controller; > + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, > + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; > + clocks = <&cpg CPG_MOD 408>; > + clock-names = "clk"; > + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; > + resets = <&cpg 408>; > + }; > + > + prr: chipid@ff000044 { > + compatible = "renesas,prr"; > + reg = <0 0xff000044 0 4>; > + }; > + }; > + > + timer { > + compatible = "arm,armv7-timer"; > + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; > + }; > + > + /* External USB clock - can be overridden by the board */ > + usb_extal_clk: usb_extal { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <48000000>; > + }; > +}; > -- > 2.7.4 >
Hi Simon & Geert, Thanks for feedback. > On Wed, Mar 28, 2018 at 08:26:14PM +0100, Biju Das wrote: > > The initial R8A77470 SoC device tree including CPU0, GIC, timer, SYSC, > > RST, CPG, and the required clock descriptions. > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- > > V1->V2: > > * Incorporated geert's review comment > > * Moved prr node inside soc node. > > > > arch/arm/boot/dts/r8a77470.dtsi | 155 > > ++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 155 insertions(+) > > create mode 100644 arch/arm/boot/dts/r8a77470.dtsi > > > > diff --git a/arch/arm/boot/dts/r8a77470.dtsi > > b/arch/arm/boot/dts/r8a77470.dtsi new file mode 100644 index > > 0000000..f096419 > > --- /dev/null > > +++ b/arch/arm/boot/dts/r8a77470.dtsi > > @@ -0,0 +1,155 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for the r8a77470 SoC > > + * > > + * Copyright (C) 2018 Renesas Electronics Corp. > > + */ > > + > > +#include <dt-bindings/interrupt-controller/irq.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/clock/r8a77470-cpg-mssr.h> > > +#include <dt-bindings/power/r8a77470-sysc.h> > > As requested by Geert in his review of v1, please use numerical values for the > initial submission as the dt-bindings headers and the DTS files go upstream > through different maintainer paths. > > In other words, please do not include r8a77470-cpg-mssr.h or r8a77470-sysc.h > in the initial submission of this file as those header files will not be present and > there will be a build failure. > Rather, please use numeric values for now and, as a follow-up in the v4.19 > development cycle, provide a patch to use the headers. > I got your point now. Will send V3 for this patch with numerical values. Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi new file mode 100644 index 0000000..f096419 --- /dev/null +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a77470 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a77470-cpg-mssr.h> +#include <dt-bindings/power/r8a77470-sysc.h> +/ { + compatible = "renesas,r8a77470"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; + power-domains = <&sysc R8A77470_PD_CA7_CPU0>; + next-level-cache = <&L2_CA7>; + }; + + + L2_CA7: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A77470_PD_CA7_SCU>; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77470-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77470-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77470-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x100>; + }; + }; + + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x20000>; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77470", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; +};