new file mode 100644
@@ -0,0 +1,30 @@
+Generic resistive touchscreen ADC
+
+Required properties:
+
+ - compatible: must be "resistive-adc-touch"
+The device must be connected to an ADC device that provides channels for
+position measurement and optional pressure.
+Refer to ../iio/iio-bindings.txt for details
+ - iio-channels: must have at least two channels connected to an ADC device.
+These should correspond to the channels exposed by the ADC device and should
+have the right index as the ADC device registers them. These channels
+represent the relative position on the "x" and "y" axes.
+ - iio-channel-names: must have all the channels' names. Mandatory channels
+are "x" and "y".
+
+Optional properties:
+ - iio-channels: The third channel named "pressure" is optional and can be
+used if the ADC device also measures pressure besides position.
+If this channel is missing, pressure will be ignored and the touchscreen
+will only report position.
+ - iio-channel-names: optional channel named "pressure".
+
+Example:
+
+ resistive_touch: resistive_touch {
+ compatible = "resistive-adc-touch";
+ touchscreen-threshold-pressure = <50000>;
+ io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+ io-channel-names = "x", "y", "pressure";
+ };
Added bindings for generic resistive touchscreen ADC. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- Changes in v3: - renamed file and compatible to exclude "generic" keyword - removed the pressure threshold property, added it as a common touchscreen property in the touchscreen common bindings in a separate commit. Changes in v2: - modified bindings to have a generic resistive touchscreen adc driver instead of specific architecture one. .../input/touchscreen/resistive-adc-touch.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt