diff mbox

[v6,2/2] ARM: dts: imx: Add basic dts support for imx6sll EVK board

Message ID 1526899612-22856-2-git-send-email-ping.bai@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jacky Bai May 21, 2018, 10:46 a.m. UTC
Add dts file support for imx6sll EVK board.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 change v3->v4
 - update the license indentifier
 - remove leading zero of node
 - remove unused pin from hog group
 change v4->v5
 - use generic name for device node
 - remove unnecessary hog pin group
 change v5->v6
 - no
---
 Documentation/devicetree/bindings/arm/fsl.txt |   4 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/imx6sll-evk.dts             | 315 ++++++++++++++++++++++++++
 3 files changed, 321 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts

Comments

Aisheng Dong May 25, 2018, 3:35 a.m. UTC | #1
> -----Original Message-----
> From: Jacky Bai
> Sent: Monday, May 21, 2018 6:47 PM
> To: shawnguo@kernel.org; robh+dt@kernel.org; kernel@pengutronix.de
> Cc: Fabio Estevam <fabio.estevam@nxp.com>; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; dl-linux-imx <linux-imx@nxp.com>;
> A.s. Dong <aisheng.dong@nxp.com>; jacky.baip@gmail.com
> Subject: [PATCH v6 2/2] ARM: dts: imx: Add basic dts support for imx6sll EVK
> board
> 
> Add dts file support for imx6sll EVK board.
> 
> Signed-off-by: Bai Ping <ping.bai@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  change v3->v4
>  - update the license indentifier
>  - remove leading zero of node
>  - remove unused pin from hog group
>  change v4->v5
>  - use generic name for device node
>  - remove unnecessary hog pin group
>  change v5->v6
>  - no
> ---
>  Documentation/devicetree/bindings/arm/fsl.txt |   4 +
>  arch/arm/boot/dts/Makefile                    |   2 +
>  arch/arm/boot/dts/imx6sll-evk.dts             | 315
> ++++++++++++++++++++++++++
>  3 files changed, 321 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt
> b/Documentation/devicetree/bindings/arm/fsl.txt
> index cdb9dd7..8a1baa2 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.txt
> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
> @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board  Required root
> node properties:
>      - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
> 
> +i.MX6SLL EVK board
> +Required root node properties:
> +    - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
> +
>  Generic i.MX boards
>  -------------------
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index f4753b0..f3fb85f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -521,6 +521,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  dtb-$(CONFIG_SOC_IMX6SL) += \
>  	imx6sl-evk.dtb \
>  	imx6sl-warp.dtb
> +dtb-$(CONFIG_SOC_IMX6SLL) += \
> +	imx6sll-evk.dtb
>  dtb-$(CONFIG_SOC_IMX6SX) += \
>  	imx6sx-nitrogen6sx.dtb \
>  	imx6sx-sabreauto.dtb \
> diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-
> evk.dts
> new file mode 100644
> index 0000000..0cfa4a2
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sll-evk.dts
> @@ -0,0 +1,315 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + * Copyright 2017-2018 NXP.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "imx6sll.dtsi"
> +
> +/ {
> +	model = "Freescale i.MX6SLL EVK Board";
> +	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
> +
> +	memory@80000000 {
> +		reg = <0x80000000 0x80000000>;
> +	};
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 5000000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +		status = "okay";
> +	};
> +
> +	reg_usb_otg1_vbus: regulator-otg1-vbus {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
> +		regulator-name = "usb_otg1_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_usb_otg2_vbus: regulator-otg2-vbus {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
> +		regulator-name = "usb_otg2_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_aud3v: regulator-aud3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "wm8962-supply-3v15";
> +		regulator-min-microvolt = <3150000>;
> +		regulator-max-microvolt = <3150000>;
> +		regulator-boot-on;
> +	};
> +
> +	reg_aud4v: regulator-aud4v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "wm8962-supply-4v2";
> +		regulator-min-microvolt = <4325000>;
> +		regulator-max-microvolt = <4325000>;
> +		regulator-boot-on;
> +	};
> +
> +	reg_lcd: regulator-lcd {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_lcd>;
> +		regulator-name = "lcd-pwr";
> +		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_sd1_vmmc: regulator-sd1-vmmc {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
> +		regulator-name = "SD1_SPWR";
> +		regulator-min-microvolt = <3000000>;
> +		regulator-max-microvolt = <3000000>;
> +		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +};
> +
> +&cpu0 {
> +	arm-supply = <&sw1a_reg>;
> +	soc-supply = <&sw1c_reg>;
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	pfuze100: pmic@8 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3b_reg: sw3b {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl_usb_otg1_vbus: vbus1grp {
> +		fsl,pins = <
> +			MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
> +		>;
> +	};
> +
> +	pinctrl_usb_otg2_vbus: vbus2grp {
> +		fsl,pins = <
> +			MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
> +		>;
> +	};
> +
> +	pinctrl_reg_lcd: reglcdgrp {
> +		fsl,pins = <
> +			MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x17059
> +		>;
> +	};
> +
> +	pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
> +		fsl,pins = <
> +			MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX
> 0x1b0b1
> +			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX
> 0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
> +			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
> +			MX6SLL_PAD_SD1_DATA0__SD1_DATA0
> 	0x17059
> +			MX6SLL_PAD_SD1_DATA1__SD1_DATA1
> 	0x17059
> +			MX6SLL_PAD_SD1_DATA2__SD1_DATA2
> 	0x17059
> +			MX6SLL_PAD_SD1_DATA3__SD1_DATA3
> 	0x17059
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
> +		fsl,pins = <
> +			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
> +			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
> +			MX6SLL_PAD_SD1_DATA0__SD1_DATA0
> 	0x170b9
> +			MX6SLL_PAD_SD1_DATA1__SD1_DATA1
> 	0x170b9
> +			MX6SLL_PAD_SD1_DATA2__SD1_DATA2
> 	0x170b9
> +			MX6SLL_PAD_SD1_DATA3__SD1_DATA3
> 	0x170b9
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
> +		fsl,pins = <
> +			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
> +			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
> +			MX6SLL_PAD_SD1_DATA0__SD1_DATA0
> 	0x170f9
> +			MX6SLL_PAD_SD1_DATA1__SD1_DATA1
> 	0x170f9
> +			MX6SLL_PAD_SD1_DATA2__SD1_DATA2
> 	0x170f9
> +			MX6SLL_PAD_SD1_DATA3__SD1_DATA3
> 	0x170f9
> +		>;
> +	};
> +
> +	pinctrl_usbotg1: usbotg1grp {
> +		fsl,pins = <
> +			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID
> 0x17059
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
> +			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
> +		>;
> +	};
> +};

Due to iomux node usually may expend largely, we choose better to put iomux node
at the end of this file to make other nodes easily looking.

Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>

Regards
Dong Aisheng

> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> +	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
> +	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> +	keep-power-in-suspend;
> +	wakeup-source;
> +	vmmc-supply = <&reg_sd1_vmmc>;
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	vbus-supply = <&reg_usb_otg1_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg1>;
> +	disable-over-current;
> +	srp-disable;
> +	hnp-disable;
> +	adp-disable;
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	vbus-supply = <&reg_usb_otg2_vbus>;
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> --
> 1.9.1
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index cdb9dd7..8a1baa2 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -53,6 +53,10 @@  i.MX6 Quad SABRE Automotive Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 
+i.MX6SLL EVK board
+Required root node properties:
+    - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
 Generic i.MX boards
 -------------------
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f4753b0..f3fb85f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -521,6 +521,8 @@  dtb-$(CONFIG_SOC_IMX6Q) += \
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
new file mode 100644
index 0000000..0cfa4a2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -0,0 +1,315 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd>;
+		regulator-name = "lcd-pwr";
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_usb_otg1_vbus: vbus1grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus: vbus2grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+		>;
+	};
+
+	pinctrl_reg_lcd: reglcdgrp {
+		fsl,pins = <
+			MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x17059
+		>;
+	};
+
+	pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};