@@ -305,6 +305,43 @@ static void handle_percpu_devid_nmi(struct irq_desc *desc)
chip->irq_eoi(&desc->irq_data);
}
+static int gic_irq_set_irqchip_prio(struct irq_data *d, bool val)
+{
+ u8 prio;
+ irq_flow_handler_t handler;
+
+ if (gic_peek_irq(d, GICD_ISENABLER)) {
+ pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq);
+ return -EPERM;
+ }
+
+ if (val) {
+ prio = GICD_INT_NMI_PRI;
+
+ if (gic_irq(d) < 32)
+ handler = handle_percpu_devid_nmi;
+ else
+ handler = handle_fasteoi_nmi;
+ } else {
+ prio = GICD_INT_DEF_PRI;
+
+ if (gic_irq(d) < 32)
+ handler = handle_percpu_devid_irq;
+ else
+ handler = handle_fasteoi_irq;
+ }
+
+ /*
+ * Already in a locked context for the desc from calling
+ * irq_set_irq_chip_state.
+ * It should be safe to simply modify the handler.
+ */
+ irq_to_desc(d->irq)->handle_irq = handler;
+ gic_set_irq_prio(gic_irq(d), gic_dist_base(d), prio);
+
+ return 0;
+}
+
static int gic_irq_set_irqchip_state(struct irq_data *d,
enum irqchip_irq_state which, bool val)
{
@@ -326,6 +363,16 @@ static int gic_irq_set_irqchip_state(struct irq_data *d,
reg = val ? GICD_ICENABLER : GICD_ISENABLER;
break;
+ case IRQCHIP_STATE_NMI:
+ if (gic_supports_nmi()) {
+ return gic_irq_set_irqchip_prio(d, val);
+ } else if (val) {
+ pr_warn("Failed to set IRQ %u as NMI, NMIs are unsupported\n",
+ gic_irq(d));
+ return -EINVAL;
+ }
+ return 0;
+
default:
return -EINVAL;
}
@@ -353,6 +400,13 @@ static int gic_irq_get_irqchip_state(struct irq_data *d,
*val = !gic_peek_irq(d, GICD_ISENABLER);
break;
+ case IRQCHIP_STATE_NMI:
+ if (!gic_supports_nmi())
+ return -EINVAL;
+ *val = (gic_get_irq_prio(gic_irq(d), gic_dist_base(d)) ==
+ GICD_INT_NMI_PRI);
+ break;
+
default:
return -EINVAL;
}
@@ -419,6 +419,7 @@ enum irqchip_irq_state {
IRQCHIP_STATE_ACTIVE, /* Is interrupt in progress? */
IRQCHIP_STATE_MASKED, /* Is interrupt masked? */
IRQCHIP_STATE_LINE_LEVEL, /* Is IRQ line high? */
+ IRQCHIP_STATE_NMI, /* Is IRQ an NMI? */
};
extern int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
Provide a way to set a GICv3 interrupt as pseudo-NMI. The interrupt must not be enabled when setting/clearing the NMI status of the interrupt. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> --- drivers/irqchip/irq-gic-v3.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/interrupt.h | 1 + 2 files changed, 55 insertions(+)