diff mbox

[5/6] arm: dts: Change PCIe INTx mapping for HR2

Message ID 1527631130-20045-6-git-send-email-ray.jui@broadcom.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ray Jui May 29, 2018, 9:58 p.m. UTC 
Change the PCIe INTx mapping to model the 4 INTx interrupts in the
IRQ domain of the iProc PCIe controller itself

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 3f9cedd..20e3161 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -298,9 +298,14 @@ 
 		compatible = "brcm,iproc-pcie";
 		reg = <0x18012000 0x1000>;
 
+		interrupt-controller;
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0 1>,
+				<0 0 0 2 &pcie0 2>,
+				<0 0 0 3 &pcie0 3>,
+				<0 0 0 4 &pcie0 4>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_NONE>;
 
 		linux,pci-domain = <0>;
 
@@ -334,9 +339,14 @@ 
 		compatible = "brcm,iproc-pcie";
 		reg = <0x18013000 0x1000>;
 
+		interrupt-controller;
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie1 1>,
+				<0 0 0 2 &pcie1 2>,
+				<0 0 0 3 &pcie1 3>,
+				<0 0 0 4 &pcie1 4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
 
 		linux,pci-domain = <1>;