[v3,3/3] arm64: dts: Update Stingray clock DT nodes

Commit Message

Ray Jui June 2, 2018, 12:56 a.m. UTC

From: Pramod Kumar <[e-mail]>

Update clock output names in the Stingray clock DT nodes so they match
the binding document and the latest ASIC datasheet. Also add entries
for LCPLL2

Signed-off-by: Pramod Kumar <[e-mail]>
Signed-off-by: Ray Jui <[e-mail]>
---
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 26 ++++++++++++++++------
 1 file changed, 19 insertions(+), 7 deletions(-)

Comments

Florian Fainelli June 4, 2018, 9:11 p.m. UTC | #1

On 06/01/2018 05:56 PM, Ray Jui wrote:
> From: Pramod Kumar <[e-mail]>
> 
> Update clock output names in the Stingray clock DT nodes so they match
> the binding document and the latest ASIC datasheet. Also add entries
> for LCPLL2
> 
> Signed-off-by: Pramod Kumar <[e-mail]>
> Signed-off-by: Ray Jui <[e-mail]>

Applied to devicetree-arm64/next, thanks!

Patch

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index 3a4d452..10a106a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -52,12 +52,24 @@ 
 			reg = <0x0001d104 0x32>,
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll0", "clk_125", "clk_scr",
+			clock-output-names = "genpll0", "clk_125m", "clk_scr",
 					     "clk_250", "clk_pcie_axi",
 					     "clk_paxc_axi_x2",
 					     "clk_paxc_axi";
 		};
 
+		genpll2: genpll2@1d1ac {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll2";
+			reg = <0x0001d1ac 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll2", "clk_nic",
+					     "clk_ts_500_ref", "clk_125_nitro",
+					     "clk_chimp", "clk_nic_flash",
+					     "clk_fs";
+		};
+
 		genpll3: genpll3@1d1e0 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll3";
@@ -75,8 +87,8 @@ 
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
 			clock-output-names = "genpll4", "clk_ccn",
-					     "clk_tpiu_pll", "noc_clk",
-					     "pll_chclk_fs4",
+					     "clk_tpiu_pll", "clk_noc",
+					     "clk_chclk_fs4",
 					     "clk_bridge_fscpu";
 		};
 
@@ -86,8 +98,8 @@ 
 			reg = <0x0001d248 0x32>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll5", "fs4_hf_clk",
-					     "crypto_ae_clk", "raid_ae_clk";
+			clock-output-names = "genpll5", "clk_fs4_hf",
+					     "clk_crypto_ae", "clk_raid_ae";
 		};
 
 		lcpll0: lcpll0@1d0c4 {
@@ -107,9 +119,9 @@ 
 			reg = <0x0001d138 0x3c>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "lcpll1", "clk_wanpn",
+			clock-output-names = "lcpll1", "clk_wan",
 					     "clk_usb_ref",
-					     "timesync_evt_clk";
+					     "clk_crmu_ts";
 		};
 
 		hsls_clk: hsls_clk {