[v2,6/6] arm: dts: add support for Laird SOM60 module and DVK boards

Message ID	1529070055-18701-6-git-send-email-ben.whitten@lairdtech.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Ben Whitten <ben.whitten@gmail.com> To: devicetree@vger.kernel.org Subject: [PATCH v2 6/6] arm: dts: add support for Laird SOM60 module and DVK boards Date: Fri, 15 Jun 2018 14:40:55 +0100 Message-Id: <1529070055-18701-6-git-send-email-ben.whitten@lairdtech.com> In-Reply-To: <1529070055-18701-1-git-send-email-ben.whitten@lairdtech.com> References: <1529070055-18701-1-git-send-email-ben.whitten@lairdtech.com> Precedence: list Cc: mark.rutland@arm.com, alexandre.belloni@bootlin.com, Ben Whitten <ben.whitten@lairdtech.com>, linux-kernel@vger.kernel.org, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 214d5d9..b0e164a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -51,6 +51,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ + at91-dvk_som60.dtb \ at91-gatwick.dtb \ at91-tse850-3.dtb \ at91-wb50n.dtb \ diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts new file mode 100644 index 0000000..ededd5b --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_som60.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +/dts-v1/; +#include "at91-som60.dtsi" +#include "at91-dvk_su60_somc.dtsi" +#include "at91-dvk_su60_somc_lcm.dtsi" + +/ { + model = "Laird DVK SOM60"; + compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + tick-timer = &pit; + }; +}; + +&mmc0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&ssc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi new file mode 100644 index 0000000..bb86f17 --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; + + atmel,model = "wm8904 @ DVK-SOM60"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "okay"; + }; +}; + +&mmc0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + slot@0 { + bus-width = <4>; + cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + cd-inverted; + }; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */ + spi-flash@0 { + compatible = "mxicy,mx25u4035", "jedec,spi-nor"; + spi-max-frequency = <33000000>; + reg = <0>; + }; +}; + +&ssc0 { + atmel,clk-from-rk-pin; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck2>; + clock-names = "mclk"; + }; +}; + +&i2c1 { + status = "okay"; + + eeprom@87 { + compatible = "giantec,gt24c32a", "atmel,24c32"; + reg = <87>; + pagesize = <32>; + }; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@7 { + reg = <7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_geth_int>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; +}; + +&macb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_int>; + interrupt-parent = <&pioC>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi new file mode 100644 index 0000000..4b9176d --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + panel: panel { + compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel"; + backlight = <&backlight>; + power-supply = <&vcc_lcd_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + vcc_lcd_reg: fixedregulator_lcd { + compatible = "regulator-fixed"; + regulator-name = "VCC LCM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + status = "okay"; + }; +}; + +&pinctrl { + board { + pinctrl_lcd_ctp_int: lcd_ctp_int { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + ft5426@56 { + compatible = "focaltech,ft5426", "edt,edt-ft5406"; + reg = <56>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_ctp_int>; + + interrupt-parent = <&pioC>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&hlcdc { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi new file mode 100644 index 0000000..6472fce --- /dev/null +++ b/arch/arm/boot/dts/at91-som60.dtsi @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-som60.dtsi - Device Tree file for the SOM60 module + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +#include "sama5d36.dtsi" + +/ { + model = "Laird SOM60"; + compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_en: mmc0_en { + atmel,pins = + <AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_wp: nand0_wp { + atmel,pins = + <AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_usb_vbus: usb_vbus { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + /* Conflicts with USART2_SCK */ + }; + + pinctrl_usart2_sck: usart2_sck { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_VBUS */ + }; + + pinctrl_usb_oc: usb_oc { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART3_SCK */ + }; + + pinctrl_usart3_sck: usart3_sck { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_OC */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_geth_int: geth_int { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART1_SCK */ + }; + + pinctrl_usart1_sck: usart1_sck { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + /* Conflicts with GETH_INT */ + }; + + pinctrl_eth_int: eth_int { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; +}; + +&mmc0 { + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc1 { + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&spi0 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +&usart1 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; +}; + +&usart2 { + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>; +}; + +&usart3 { + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; +}; + +&adc0 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + >; +}; + +&macb0 { + phy-mode = "rgmii"; +}; + +&macb1 { + phy-mode = "rmii"; +}; + + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ubootspl@0 { + label = "u-boot-spl"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + ubi@e0000 { + label = "ubi"; + reg = <0xe0000 0xfe00000>; + }; + }; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>; + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 20 GPIO_ACTIVE_HIGH + 0>; + atmel,oc-gpio = <0 + &pioE 15 GPIO_ACTIVE_LOW + 0>; +};

[v2,6/6] arm: dts: add support for Laird SOM60 module and DVK boards

Commit Message

Patch