diff mbox

[2/3] ARM: dts: imx6sll-evk: correct lcd regulator GPIO pin

Message ID 1531468707-25737-2-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Anson Huang July 13, 2018, 7:58 a.m. UTC 
On i.MX6SLL EVK board, lcd regulator is controlled
by GPIO4 IO03 using MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 pin,
NOT MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08, correct it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx6sll-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Fabio Estevam July 13, 2018, 6 p.m. UTC | #1 
On Fri, Jul 13, 2018 at 4:58 AM, Anson Huang <Anson.Huang@nxp.com> wrote:
> On i.MX6SLL EVK board, lcd regulator is controlled
> by GPIO4 IO03 using MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 pin,
> NOT MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08, correct it.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index cc5cf5e..41e87e6 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -74,7 +74,7 @@ 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_lcd>;
 		regulator-name = "lcd-pwr";
-		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
@@ -289,7 +289,7 @@ 
 
 	pinctrl_reg_lcd: reglcdgrp {
 		fsl,pins = <
-			MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x17059
+			MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
 		>;
 	};