diff mbox series

[v2,1/2] dt-bindings: spi: add DT bindings for UniPhier SPI controller

Message ID 1532588943-19481-2-git-send-email-hayashibara.keiji@socionext.com (mailing list archive)
State New, archived
Headers show
Series add SPI controller driver for UniPhier SoCs | expand

Commit Message

Keiji Hayashibara July 26, 2018, 7:09 a.m. UTC
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

Add DT bindings for SPI controller implemented in UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
---
 .../devicetree/bindings/spi/spi-uniphier.txt       | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt

Comments

Rob Herring (Arm) July 30, 2018, 9:47 p.m. UTC | #1
On Thu, Jul 26, 2018 at 04:09:02PM +0900, Keiji Hayashibara wrote:
> From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> 
> Add DT bindings for SPI controller implemented in UniPhier SoCs.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
> ---
>  .../devicetree/bindings/spi/spi-uniphier.txt       | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt

Please add acks/reviewed-bys when posting new versions.

Rob
Keiji Hayashibara July 30, 2018, 11:44 p.m. UTC | #2
Hello Rob,

I see.
I will add "Acked-by" and "Reviewed-by" tag by Rob in next version.

Thank you.

-----------------
Best Regards,
Keiji Hayashibara

> -----Original Message-----
> From: Rob Herring [mailto:robh@kernel.org]
> Sent: Tuesday, July 31, 2018 6:47 AM
> To: Hayashibara, Keiji/ζž—εŽŸ ε•“δΊŒ <hayashibara.keiji@socionext.com>
> Subject: Re: [PATCH v2 1/2] dt-bindings: spi: add DT bindings for UniPhier SPI controller
> 
> On Thu, Jul 26, 2018 at 04:09:02PM +0900, Keiji Hayashibara wrote:
> > From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> >
> > Add DT bindings for SPI controller implemented in UniPhier SoCs.
> >
> > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> > Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
> > ---
> >  .../devicetree/bindings/spi/spi-uniphier.txt       | 22 ++++++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt
> 
> Please add acks/reviewed-bys when posting new versions.
> 
> Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
new file mode 100644
index 0000000..504a4ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -0,0 +1,22 @@ 
+Socionext UniPhier SPI controller driver
+
+UniPhier SoCs have SCSSI which supports SPI single channel.
+
+Required properties:
+ - compatible: should be "socionext,uniphier-scssi"
+ - reg: address and length of the spi master registers
+ - #address-cells: must be <1>, see spi-bus.txt
+ - #size-cells: must be <0>, see spi-bus.txt
+ - clocks: A phandle to the clock for the device.
+ - resets: A phandle to the reset control for the device.
+
+Example:
+
+spi0: spi@54006000 {
+	compatible = "socionext,uniphier-scssi";
+	reg = <0x54006000 0x100>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&peri_clk 11>;
+	resets = <&peri_rst 11>;
+};