diff mbox series

[2/3] arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes

Message ID 1535107429-5458-3-git-send-email-biju.das@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series Add USB support | expand

Commit Message

Biju Das Aug. 24, 2018, 10:43 a.m. UTC 
Add usb dmac and hsusb device nodes on RZ/G2M SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 45 +++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

Comments

Simon Horman Aug. 28, 2018, 1:17 p.m. UTC | #1 
On Fri, Aug 24, 2018 at 11:43:48AM +0100, Biju Das wrote:
> Add usb dmac and hsusb device nodes on RZ/G2M SoC dtsi.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman Aug. 30, 2018, 12:28 p.m. UTC | #2 
On Tue, Aug 28, 2018 at 03:17:39PM +0200, Simon Horman wrote:
> On Fri, Aug 24, 2018 at 11:43:48AM +0100, Biju Das wrote:
> > Add usb dmac and hsusb device nodes on RZ/G2M SoC dtsi.
> > 
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> 
> Thanks,
> 
> This looks fine to me but I will wait to see if there are other reviews
> before applying.

Thanks again, applied for v4.20.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index a794089..0c1bae7 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -596,6 +596,51 @@ 
 			status = "disabled";
 		};
 
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774a1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";