diff mbox series

ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs

Message ID 1535830181-17254-1-git-send-email-stefan.wahren@i2se.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs | expand

Commit Message

Stefan Wahren Sept. 1, 2018, 7:29 p.m. UTC 
Since the LAN7515 on Raspberry Pi 3B+ doesn't have an EEPROM and the OTP
is empty, we need to enable the Ethernet LEDs via Device Tree.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Stefan Wahren Sept. 5, 2018, 7:59 p.m. UTC | #1 
> Stefan Wahren <stefan.wahren@i2se.com> hat am 1. September 2018 um 21:29 geschrieben:
> 
> 
> Since the LAN7515 on Raspberry Pi 3B+ doesn't have an EEPROM and the OTP
> is empty, we need to enable the Ethernet LEDs via Device Tree.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>

applied to bcm2835-dt-next
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
index 9403da0..70bece6 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -1,4 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
 / {
 	aliases {
 		ethernet0 = &ethernet;
@@ -21,6 +23,18 @@ 
 			ethernet: ethernet@1 {
 				compatible = "usb424,7800";
 				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
 			};
 		};
 	};