diff mbox series

[v2,3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

Message ID 1536576195-11520-4-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Fabrizio Castro Sept. 10, 2018, 10:43 a.m. UTC 
From: Chris Paterson <chris.paterson2@renesas.com>

Add the device nodes for both RZ/G2M CAN channels.

Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---

v1->v2:
* replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
  Geert's comment.

This patch applies on top of renesas-devel-20180906-v4.19-rc2.

 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Simon Horman Sept. 11, 2018, 1:32 p.m. UTC | #1 
On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> From: Chris Paterson <chris.paterson2@renesas.com>
> 
> Add the device nodes for both RZ/G2M CAN channels.
> 
> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> v1->v2:
> * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
>   Geert's comment.
> 
> This patch applies on top of renesas-devel-20180906-v4.19-rc2.

Thanks Fabrizio,

I would like to waif for the bindings to be accepted before accepting this
patch.

> 
>  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 046fc93..867e875 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -874,6 +874,30 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can@e6c30000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c30000 0 0x1000>;
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 916>;
> +			status = "disabled";
> +		};
> +
> +		can1: can@e6c38000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c38000 0 0x1000>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 915>;
> +			status = "disabled";
> +		};
> +
>  		pwm0: pwm@e6e30000 {
>  			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
>  			reg = <0 0xe6e30000 0 0x8>;
> -- 
> 2.7.4
>
Fabrizio Castro Sept. 27, 2018, 10:53 a.m. UTC | #2 
Hello Simon,

> Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
>
> On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > From: Chris Paterson <chris.paterson2@renesas.com>
> >
> > Add the device nodes for both RZ/G2M CAN channels.
> >
> > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >
> > v1->v2:
> > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> >   Geert's comment.
> >
> > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
>
> Thanks Fabrizio,
>
> I would like to waif for the bindings to be accepted before accepting this
> patch.

Marc has taken the bindings, I guess we can unblock this patch now?

Thanks,
Fab

>
> >
> >  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > index 046fc93..867e875 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > @@ -874,6 +874,30 @@
> >  status = "disabled";
> >  };
> >
> > +can0: can@e6c30000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c30000 0 0x1000>;
> > +interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 916>;
> > +status = "disabled";
> > +};
> > +
> > +can1: can@e6c38000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c38000 0 0x1000>;
> > +interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 915>;
> > +status = "disabled";
> > +};
> > +
> >  pwm0: pwm@e6e30000 {
> >  compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
> >  reg = <0 0xe6e30000 0 0x8>;
> > --
> > 2.7.4
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
Simon Horman Oct. 1, 2018, 12:44 p.m. UTC | #3 
On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Thanks, applied for v4.21.
Simon Horman Oct. 18, 2018, 1:18 p.m. UTC | #4 
On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Sorry for letting this slip.

Yes, applied for v4.21.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 046fc93..867e875 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -874,6 +874,30 @@ 
 			status = "disabled";
 		};
 
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
 		pwm0: pwm@e6e30000 {
 			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
 			reg = <0 0xe6e30000 0 0x8>;