diff mbox series

[v7,6/7] arm64: zynqmp: Add DDRC node

Message ID 1537194305-9243-7-git-send-email-manish.narani@xilinx.com (mailing list archive)
State Superseded, archived
Headers show
Series EDAC: Enhancements to Synopsys EDAC driver | expand

Commit Message

Manish Narani Sept. 17, 2018, 2:25 p.m. UTC 
Add ddrc memory controller node in dts. The size mentioned in dts is
0x30000, because we need to access DDR_QOS INTR registers located at
0xFD090208 from this driver.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Borislav Petkov Sept. 21, 2018, 12:57 p.m. UTC | #1 
On Mon, Sep 17, 2018 at 07:55:04PM +0530, Manish Narani wrote:
> Add ddrc memory controller node in dts. The size mentioned in dts is
> 0x30000, because we need to access DDR_QOS INTR registers located at
> 0xFD090208 from this driver.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)

Still needs DT folks ACK.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 29ce234..a81d3b16 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -355,6 +355,13 @@ 
 			xlnx,bus-width = <64>;
 		};
 
+		mc: memory-controller@fd070000 {
+			compatible = "xlnx,zynqmp-ddrc-2.40a";
+			reg = <0x0 0xfd070000 0x0 0x30000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 112 4>;
+		};
+
 		gem0: ethernet@ff0b0000 {
 			compatible = "cdns,zynqmp-gem", "cdns,gem";
 			status = "disabled";