| Message ID | 1537334893-26079-2-git-send-email-yamada.masahiro@socionext.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | serial: 8250_uniphier: remove unused code and add auto-flow-control | expand |
On Wed, 19 Sep 2018 14:28:11 +0900, Masahiro Yamada wrote: > The FIFO size of the UART devices is 64 on almost all UniPhier SoCs > with the exception Pro4TV SoC (MN2WS0230), which used 128 FIFO size. > However, Pro4TV SoC was never upstreamed, and out of production. > > So, this property has never been used in a useful way. > Let's remove old unused code. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > --- > > Documentation/devicetree/bindings/serial/uniphier-uart.txt | 4 ---- > drivers/tty/serial/8250/8250_uniphier.c | 10 +--------- > 2 files changed, 1 insertion(+), 13 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt index 0b3892a..811c479 100644 --- a/Documentation/devicetree/bindings/serial/uniphier-uart.txt +++ b/Documentation/devicetree/bindings/serial/uniphier-uart.txt @@ -6,9 +6,6 @@ Required properties: - interrupts: a single interrupt specifier. - clocks: phandle to the input clock. -Optional properties: -- fifo-size: the RX/TX FIFO size. Defaults to 64 if not specified. - Example: aliases { serial0 = &serial0; @@ -19,5 +16,4 @@ Example: reg = <0x54006800 0x40>; interrupts = <0 33 4>; clocks = <&uart_clk>; - fifo-size = <64>; }; diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index 28d88ccf..d292654 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -12,9 +12,6 @@ #include "8250.h" -/* Most (but not all) of UniPhier UART devices have 64-depth FIFO. */ -#define UNIPHIER_UART_DEFAULT_FIFO_SIZE 64 - /* * This hardware is similar to 8250, but its register map is a bit different: * - MMIO32 (regshift = 2) @@ -185,12 +182,6 @@ static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port, port->uartclk = clk_get_rate(priv->clk); - /* Check for fifo size */ - if (of_property_read_u32(np, "fifo-size", &prop) == 0) - port->fifosize = prop; - else - port->fifosize = UNIPHIER_UART_DEFAULT_FIFO_SIZE; - return 0; } @@ -241,6 +232,7 @@ static int uniphier_uart_probe(struct platform_device *pdev) up.port.type = PORT_16550A; up.port.iotype = UPIO_MEM32; + up.port.fifosize = 64; up.port.regshift = UNIPHIER_UART_REGSHIFT; up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE; up.capabilities = UART_CAP_FIFO;
The FIFO size of the UART devices is 64 on almost all UniPhier SoCs with the exception Pro4TV SoC (MN2WS0230), which used 128 FIFO size. However, Pro4TV SoC was never upstreamed, and out of production. So, this property has never been used in a useful way. Let's remove old unused code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- Documentation/devicetree/bindings/serial/uniphier-uart.txt | 4 ---- drivers/tty/serial/8250/8250_uniphier.c | 10 +--------- 2 files changed, 1 insertion(+), 13 deletions(-)