| Message ID | 1537866192-12320-9-git-send-email-daniel.lezcano@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Tue, Sep 25, 2018 at 11:03:06AM +0200, Daniel Lezcano wrote: > Add the interrupt names for the sensors, so the code can rely on them > instead of dealing with index which are prone to error. > > The name comes from the Hisilicon documentation found on internet. > > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> > --- > .../bindings/thermal/hisilicon-thermal.txt | 3 ++ > arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 63 +++++++++++----------- > arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 1 + > 3 files changed, 36 insertions(+), 31 deletions(-) Lots of whitespace errors reported by checkpatch.pl. > > diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt > index cef716a..3edfae3 100644 > --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt > @@ -7,6 +7,7 @@ > region. > - interrupt: The interrupt number to the cpu. Defines the interrupt used > by /SOCTHERM/tsensor. > +- interrupt-names: The interrupt names for the different sensors Need to define what the names are. > - clock-names: Input clock name, should be 'thermal_clk'. > - clocks: phandles for clock specified in "clock-names" property. > - #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description. > @@ -18,6 +19,7 @@ for Hi6220: > compatible = "hisilicon,tsensor"; > reg = <0x0 0xf7030700 0x0 0x1000>; > interrupts = <0 7 0x4>; > + interrupt-names = "tsensor_intr"; That name seems pretty pointless. > clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; > clock-names = "thermal_clk"; > #thermal-sensor-cells = <1>; > @@ -28,5 +30,6 @@ for Hi3660: > compatible = "hisilicon,hi3660-tsensor"; > reg = <0x0 0xfff30000 0x0 0x1000>; > interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "tsensor_a73"; Just 'a73' is sufficient. > #thermal-sensor-cells = <1>; > };
Hi Rob, thanks for the review. On 15/10/2018 18:28, Rob Herring wrote: > On Tue, Sep 25, 2018 at 11:03:06AM +0200, Daniel Lezcano wrote: >> Add the interrupt names for the sensors, so the code can rely on them >> instead of dealing with index which are prone to error. >> >> The name comes from the Hisilicon documentation found on internet. >> >> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> >> --- >> .../bindings/thermal/hisilicon-thermal.txt | 3 ++ >> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 63 +++++++++++----------- >> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 1 + >> 3 files changed, 36 insertions(+), 31 deletions(-) > > Lots of whitespace errors reported by checkpatch.pl. Yeah, I don't know why but I have something bad with my emacs configuration when changing DT files. Will look at this. >> diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt >> index cef716a..3edfae3 100644 >> --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt >> +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt >> @@ -7,6 +7,7 @@ >> region. >> - interrupt: The interrupt number to the cpu. Defines the interrupt used >> by /SOCTHERM/tsensor. >> +- interrupt-names: The interrupt names for the different sensors > > Need to define what the names are. > >> - clock-names: Input clock name, should be 'thermal_clk'. >> - clocks: phandles for clock specified in "clock-names" property. >> - #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description. >> @@ -18,6 +19,7 @@ for Hi6220: >> compatible = "hisilicon,tsensor"; >> reg = <0x0 0xf7030700 0x0 0x1000>; >> interrupts = <0 7 0x4>; >> + interrupt-names = "tsensor_intr"; > > That name seems pretty pointless. > >> clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; >> clock-names = "thermal_clk"; >> #thermal-sensor-cells = <1>; >> @@ -28,5 +30,6 @@ for Hi3660: >> compatible = "hisilicon,hi3660-tsensor"; >> reg = <0x0 0xfff30000 0x0 0x1000>; >> interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "tsensor_a73"; > > Just 'a73' is sufficient. This is the name defined in the board documentation to give a name to the interrupt when requesting it. This one appears in /proc/interrupts. I can replace the 'tsensor_intr' by 'tsensor', but if 'tsensor_a73' is replaced by 'a73' that may looks odd in /proc/interrupts to see an interrupts line with the 'a73' name. However this is the preparation for the multiple sensors support so we will have more interrupt names. Is it possible to keep these names ? - tsensor - tsensor_a73 - tsensor_a57 - tsensor_gpu
On Mon, Oct 15, 2018 at 1:01 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > > Hi Rob, > > thanks for the review. > > On 15/10/2018 18:28, Rob Herring wrote: > > On Tue, Sep 25, 2018 at 11:03:06AM +0200, Daniel Lezcano wrote: > >> Add the interrupt names for the sensors, so the code can rely on them > >> instead of dealing with index which are prone to error. [...] > >> + interrupt-names = "tsensor_intr"; > > > > That name seems pretty pointless. > > > >> clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; > >> clock-names = "thermal_clk"; > >> #thermal-sensor-cells = <1>; > >> @@ -28,5 +30,6 @@ for Hi3660: > >> compatible = "hisilicon,hi3660-tsensor"; > >> reg = <0x0 0xfff30000 0x0 0x1000>; > >> interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; > >> + interrupt-names = "tsensor_a73"; > > > > Just 'a73' is sufficient. > > This is the name defined in the board documentation to give a name to > the interrupt when requesting it. This one appears in /proc/interrupts. > > I can replace the 'tsensor_intr' by 'tsensor', but if 'tsensor_a73' is > replaced by 'a73' that may looks odd in /proc/interrupts to see an > interrupts line with the 'a73' name. Sounds like a Linux problem, not DT... The thing is that any *-names property is supposed to be a local to block name. For example, a UART may have a TX irq. It's local name is just "TX IRQ", but then upstream at the interrupt controller it may be "UART1 TX IRQ". If you have multiple instances, the local names are the same. If we lose the node name from /proc/interrupts when interrupt-names is used, then we should fix that. > > However this is the preparation for the multiple sensors support so we > will have more interrupt names. > > Is it possible to keep these names ? > > - tsensor > - tsensor_a73 > - tsensor_a57 > - tsensor_gpu > > > > > -- > <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs > > Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | > <http://twitter.com/#!/linaroorg> Twitter | > <http://www.linaro.org/linaro-blog/> Blog >
On 16/10/2018 16:44, Rob Herring wrote: > On Mon, Oct 15, 2018 at 1:01 PM Daniel Lezcano > <daniel.lezcano@linaro.org> wrote: >> >> >> Hi Rob, >> >> thanks for the review. >> >> On 15/10/2018 18:28, Rob Herring wrote: >>> On Tue, Sep 25, 2018 at 11:03:06AM +0200, Daniel Lezcano wrote: >>>> Add the interrupt names for the sensors, so the code can rely on them >>>> instead of dealing with index which are prone to error. > > [...] > >>>> + interrupt-names = "tsensor_intr"; >>> >>> That name seems pretty pointless. >>> >>>> clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; >>>> clock-names = "thermal_clk"; >>>> #thermal-sensor-cells = <1>; >>>> @@ -28,5 +30,6 @@ for Hi3660: >>>> compatible = "hisilicon,hi3660-tsensor"; >>>> reg = <0x0 0xfff30000 0x0 0x1000>; >>>> interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; >>>> + interrupt-names = "tsensor_a73"; >>> >>> Just 'a73' is sufficient. >> >> This is the name defined in the board documentation to give a name to >> the interrupt when requesting it. This one appears in /proc/interrupts. >> >> I can replace the 'tsensor_intr' by 'tsensor', but if 'tsensor_a73' is >> replaced by 'a73' that may looks odd in /proc/interrupts to see an >> interrupts line with the 'a73' name. > > Sounds like a Linux problem, not DT... > > The thing is that any *-names property is supposed to be a local to > block name. For example, a UART may have a TX irq. It's local name is > just "TX IRQ", but then upstream at the interrupt controller it may be > "UART1 TX IRQ". If you have multiple instances, the local names are > the same. > > If we lose the node name from /proc/interrupts when interrupt-names is > used, then we should fix that. Ah, ok. It makes more sense for me now. Thanks for the explanation, .
diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt index cef716a..3edfae3 100644 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -7,6 +7,7 @@ region. - interrupt: The interrupt number to the cpu. Defines the interrupt used by /SOCTHERM/tsensor. +- interrupt-names: The interrupt names for the different sensors - clock-names: Input clock name, should be 'thermal_clk'. - clocks: phandles for clock specified in "clock-names" property. - #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description. @@ -18,6 +19,7 @@ for Hi6220: compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; interrupts = <0 7 0x4>; + interrupt-names = "tsensor_intr"; clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; @@ -28,5 +30,6 @@ for Hi3660: compatible = "hisilicon,hi3660-tsensor"; reg = <0x0 0xfff30000 0x0 0x1000>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tsensor_a73"; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index f432b0a..bf8a479 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1081,46 +1081,47 @@ compatible = "hisilicon,hi3660-tsensor"; reg = <0x0 0xfff30000 0x0 0x1000>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tsensor_a73"; #thermal-sensor-cells = <1>; }; - thermal-zones { + thermal-zones { - cls0: cls0 { - polling-delay = <1000>; - polling-delay-passive = <100>; - sustainable-power = <4500>; + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <4500>; - /* sensor ID */ - thermal-sensors = <&tsensor 1>; + /* sensor ID */ + thermal-sensors = <&tsensor 1>; - trips { - threshold: trip-point@0 { - temperature = <65000>; - hysteresis = <1000>; - type = "passive"; - }; + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <1000>; + type = "passive"; + }; - target: trip-point@1 { - temperature = <75000>; - hysteresis = <1000>; - type = "passive"; - }; - }; + target: trip-point@1 { + temperature = <75000>; + hysteresis = <1000>; + type = "passive"; + }; + }; - cooling-maps { + cooling-maps { map0 { - trip = <&target>; - contribution = <1024>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; + trip = <&target>; + contribution = <1024>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; map1 { - trip = <&target>; - contribution = <512>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; + trip = <&target>; + contribution = <512>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 247024d..9eae986 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -841,6 +841,7 @@ compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tsensor_intr"; clocks = <&sys_ctrl 22>; clock-names = "thermal_clk"; #thermal-sensor-cells = <1>;
Add the interrupt names for the sensors, so the code can rely on them instead of dealing with index which are prone to error. The name comes from the Hisilicon documentation found on internet. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- .../bindings/thermal/hisilicon-thermal.txt | 3 ++ arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 63 +++++++++++----------- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 1 + 3 files changed, 36 insertions(+), 31 deletions(-)