diff mbox series

[v2,7/7] arm64: dts: lx2160a: update fspi node

Message ID 1539605534-22302-8-git-send-email-yogeshnarayan.gaur@nxp.com (mailing list archive)
State New, archived
Headers show
Series spi: add support for octal mode | expand

Commit Message

Yogesh Narayan Gaur Oct. 15, 2018, 12:14 p.m. UTC 
Flash mt35xu512aba connected to FlexSPI controller supports
1-1-8/1-8-8 protocol.
Added flag spi-rx-bus-width and spi-tx-bus-width with values as
8 and 8 respectively for both flashes connected at CS0 and CS1.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
---
Changes for v2:
 Make spi-tx-bus-width as 8.

 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 3b20c97..24cc41c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -45,6 +45,8 @@ 
 		m25p,fast-read;
 		spi-max-frequency = <20000000>;
 		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
 	};
 
 	mt35xu512aba1: flash@1 {
@@ -54,6 +56,8 @@ 
 		m25p,fast-read;
 		spi-max-frequency = <20000000>;
 		reg = <1>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
 	};
 };