| Message ID | 1539767918-26587-1-git-send-email-daniel.lezcano@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V2] DT: rockchip: Fix stability issues with the 'performance' governor on rock960 | expand |
Am Mittwoch, 17. Oktober 2018, 11:18:30 CET schrieb Daniel Lezcano: > When the performance governor is set as default, the rock960 hangs > around one minute after booting, whatever the activity is (idle, key > pressed, loaded, ...). > > Based on the commit log found at https://patchwork.kernel.org/patch/10092377/ > > "vdd_log has no consumer and therefore will not be set to a specific > voltage. Still the PWM output pin gets configured and thence the vdd_log > output voltage will changed from it's default. Depending on the idle > state of the PWM this will slightly over or undervoltage the logic supply > of the RK3399 and cause instability with GbE (undervoltage) and PCIe > (overvoltage). Since the default value set by a voltage divider is the > correct supply voltage and we don't need to change it during runtime we > remove the rail from the devicetree completely so the PWM pin will not > be configured." > > After removing the vdd-log from the rock960's specific DT, the board > does no longer hang and shows a stable behavior. > > Apply the same change for the rock960 by removing the vdd-log from the > DT. > > Fixes: 874846f1fccd ("arm64: dts: rockchip: add 96boards RK3399 Ficus board") > Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> applied as fix for 4.20 after including a stable-tag (board entered in previous kernel version) and modified subject line a bit. Thanks Heiko
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 6c8c4ab..56abbb0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -57,18 +57,6 @@ regulator-always-on; vin-supply = <&vcc_sys>; }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 0>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - }; &cpu_l0 {
When the performance governor is set as default, the rock960 hangs around one minute after booting, whatever the activity is (idle, key pressed, loaded, ...). Based on the commit log found at https://patchwork.kernel.org/patch/10092377/ "vdd_log has no consumer and therefore will not be set to a specific voltage. Still the PWM output pin gets configured and thence the vdd_log output voltage will changed from it's default. Depending on the idle state of the PWM this will slightly over or undervoltage the logic supply of the RK3399 and cause instability with GbE (undervoltage) and PCIe (overvoltage). Since the default value set by a voltage divider is the correct supply voltage and we don't need to change it during runtime we remove the rail from the devicetree completely so the PWM pin will not be configured." After removing the vdd-log from the rock960's specific DT, the board does no longer hang and shows a stable behavior. Apply the same change for the rock960 by removing the vdd-log from the DT. Fixes: 874846f1fccd ("arm64: dts: rockchip: add 96boards RK3399 Ficus board") Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- Changelog - V2 * Added Tested and Fixes tags --- arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 12 ------------ 1 file changed, 12 deletions(-)