diff mbox series

[V4,04/10] gpio: vf610: add optional clock support

Message ID 1541149669-10857-5-git-send-email-aisheng.dong@nxp.com (mailing list archive)
State Superseded, archived
Headers show
Series ARM: imx: add imx7ulp support | expand

Commit Message

Dong Aisheng Nov. 2, 2018, 9:12 a.m. UTC
Some SoCs need the gpio clock to be enabled before accessing
HW registers. This patch add the optional clock handling.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
v2->v3:
 * error checking updated according to Russell's suggestion:
   ptr == ERR_PTR(-EPROBE_DEFER)
 * clock independently checking
v1->v2:
 * new patch
---
 drivers/gpio/gpio-vf610.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Linus Walleij Nov. 2, 2018, 9:36 a.m. UTC | #1
On Fri, Nov 2, 2018 at 10:12 AM A.s. Dong <aisheng.dong@nxp.com> wrote:

> Some SoCs need the gpio clock to be enabled before accessing
> HW registers. This patch add the optional clock handling.
>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Stefan Agner <stefan@agner.ch>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> v2->v3:
>  * error checking updated according to Russell's suggestion:
>    ptr == ERR_PTR(-EPROBE_DEFER)
>  * clock independently checking

Please look at my feedback for v2 as well, sorry for
the synchronization problems here... Didn't see this
version until after replying.

Yours,
Linus Walleij
Dong Aisheng Nov. 5, 2018, 2:10 p.m. UTC | #2
> -----Original Message-----
> From: Linus Walleij [mailto:linus.walleij@linaro.org]
> Sent: Friday, November 2, 2018 5:37 PM
[...]
> On Fri, Nov 2, 2018 at 10:12 AM A.s. Dong <aisheng.dong@nxp.com> wrote:
> 
> > Some SoCs need the gpio clock to be enabled before accessing HW
> > registers. This patch add the optional clock handling.
> >
> > Cc: Linus Walleij <linus.walleij@linaro.org>
> > Cc: Stefan Agner <stefan@agner.ch>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: linux-gpio@vger.kernel.org
> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> > ---
> > v2->v3:
> >  * error checking updated according to Russell's suggestion:
> >    ptr == ERR_PTR(-EPROBE_DEFER)
> >  * clock independently checking
> 
> Please look at my feedback for v2 as well, sorry for the synchronization
> problems here... Didn't see this version until after replying.
> 

Thanks for the suggestion.
I just sent an updated version in reply to this thread.
Please help check if it's okay to you.

Regards
Dong Aisheng

> Yours,
> Linus Walleij
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index d4ad6d0..02fb7d8 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -16,6 +16,7 @@ 
  */
 
 #include <linux/bitops.h>
+#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
@@ -256,6 +257,7 @@  static int vf610_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
+	struct clk *clk_gpio, *clk_port;
 	struct vf610_gpio_port *port;
 	struct resource *iores;
 	struct gpio_chip *gc;
@@ -280,6 +282,28 @@  static int vf610_gpio_probe(struct platform_device *pdev)
 	if (port->irq < 0)
 		return port->irq;
 
+	clk_port = devm_clk_get(&pdev->dev, "port");
+	if (clk_port == ERR_PTR(-EPROBE_DEFER))
+		return -EPROBE_DEFER;
+
+	clk_gpio = devm_clk_get(&pdev->dev, "gpio");
+	if (clk_gpio == ERR_PTR(-EPROBE_DEFER))
+		return -EPROBE_DEFER;
+
+	if (!IS_ERR_OR_NULL(clk_port)) {
+		ret = clk_prepare_enable(clk_port);
+		if (ret)
+			return ret;
+	}
+
+	if (!IS_ERR_OR_NULL(clk_gpio)) {
+		ret = clk_prepare_enable(clk_gpio);
+		if (ret) {
+			clk_disable_unprepare(clk_port);
+			return ret;
+		}
+	}
+
 	gc = &port->gc;
 	gc->of_node = np;
 	gc->parent = dev;