deleted file mode 100644
@@ -1,475 +0,0 @@
-===========================================
-ARM topology binding description
-===========================================
-
-===========================================
-1 - Introduction
-===========================================
-
-In an ARM system, the hierarchy of CPUs is defined through three entities that
-are used to describe the layout of physical CPUs in the system:
-
-- cluster
-- core
-- thread
-
-The cpu nodes (bindings defined in [1]) represent the devices that
-correspond to physical CPUs and are to be mapped to the hierarchy levels.
-
-The bottom hierarchy level sits at core or thread level depending on whether
-symmetric multi-threading (SMT) is supported or not.
-
-For instance in a system where CPUs support SMT, "cpu" nodes represent all
-threads existing in the system and map to the hierarchy level "thread" above.
-In systems where SMT is not supported "cpu" nodes represent all cores present
-in the system and map to the hierarchy level "core" above.
-
-ARM topology bindings allow one to associate cpu nodes with hierarchical groups
-corresponding to the system hierarchy; syntactically they are defined as device
-tree nodes.
-
-The remainder of this document provides the topology bindings for ARM, based
-on the Devicetree Specification, available from:
-
-https://www.devicetree.org/specifications/
-
-If not stated otherwise, whenever a reference to a cpu node phandle is made its
-value must point to a cpu node compliant with the cpu node bindings as
-documented in [1].
-A topology description containing phandles to cpu nodes that are not compliant
-with bindings standardized in [1] is therefore considered invalid.
-
-===========================================
-2 - cpu-map node
-===========================================
-
-The ARM CPU topology is defined within the cpu-map node, which is a direct
-child of the cpus node and provides a container where the actual topology
-nodes are listed.
-
-- cpu-map node
-
- Usage: Optional - On ARM SMP systems provide CPUs topology to the OS.
- ARM uniprocessor systems do not require a topology
- description and therefore should not define a
- cpu-map node.
-
- Description: The cpu-map node is just a container node where its
- subnodes describe the CPU topology.
-
- Node name must be "cpu-map".
-
- The cpu-map node's parent node must be the cpus node.
-
- The cpu-map node's child nodes can be:
-
- - one or more cluster nodes
-
- Any other configuration is considered invalid.
-
-The cpu-map node can only contain three types of child nodes:
-
-- cluster node
-- core node
-- thread node
-
-whose bindings are described in paragraph 3.
-
-The nodes describing the CPU topology (cluster/core/thread) can only
-be defined within the cpu-map node and every core/thread in the system
-must be defined within the topology. Any other configuration is
-invalid and therefore must be ignored.
-
-===========================================
-2.1 - cpu-map child nodes naming convention
-===========================================
-
-cpu-map child nodes must follow a naming convention where the node name
-must be "clusterN", "coreN", "threadN" depending on the node type (ie
-cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which
-are siblings within a single common parent node must be given a unique and
-sequential N value, starting from 0).
-cpu-map child nodes which do not share a common parent node can have the same
-name (ie same number N as other cpu-map child nodes at different device tree
-levels) since name uniqueness will be guaranteed by the device tree hierarchy.
-
-===========================================
-3 - cluster/core/thread node bindings
-===========================================
-
-Bindings for cluster/cpu/thread nodes are defined as follows:
-
-- cluster node
-
- Description: must be declared within a cpu-map node, one node
- per cluster. A system can contain several layers of
- clustering and cluster nodes can be contained in parent
- cluster nodes.
-
- The cluster node name must be "clusterN" as described in 2.1 above.
- A cluster node can not be a leaf node.
-
- A cluster node's child nodes must be:
-
- - one or more cluster nodes; or
- - one or more core nodes
-
- Any other configuration is considered invalid.
-
-- core node
-
- Description: must be declared in a cluster node, one node per core in
- the cluster. If the system does not support SMT, core
- nodes are leaf nodes, otherwise they become containers of
- thread nodes.
-
- The core node name must be "coreN" as described in 2.1 above.
-
- A core node must be a leaf node if SMT is not supported.
-
- Properties for core nodes that are leaf nodes:
-
- - cpu
- Usage: required
- Value type: <phandle>
- Definition: a phandle to the cpu node that corresponds to the
- core node.
-
- If a core node is not a leaf node (CPUs supporting SMT) a core node's
- child nodes can be:
-
- - one or more thread nodes
-
- Any other configuration is considered invalid.
-
-- thread node
-
- Description: must be declared in a core node, one node per thread
- in the core if the system supports SMT. Thread nodes are
- always leaf nodes in the device tree.
-
- The thread node name must be "threadN" as described in 2.1 above.
-
- A thread node must be a leaf node.
-
- A thread node must contain the following property:
-
- - cpu
- Usage: required
- Value type: <phandle>
- Definition: a phandle to the cpu node that corresponds to
- the thread node.
-
-===========================================
-4 - Example dts
-===========================================
-
-Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters):
-
-cpus {
- #size-cells = <0>;
- #address-cells = <2>;
-
- cpu-map {
- cluster0 {
- cluster0 {
- core0 {
- thread0 {
- cpu = <&CPU0>;
- };
- thread1 {
- cpu = <&CPU1>;
- };
- };
-
- core1 {
- thread0 {
- cpu = <&CPU2>;
- };
- thread1 {
- cpu = <&CPU3>;
- };
- };
- };
-
- cluster1 {
- core0 {
- thread0 {
- cpu = <&CPU4>;
- };
- thread1 {
- cpu = <&CPU5>;
- };
- };
-
- core1 {
- thread0 {
- cpu = <&CPU6>;
- };
- thread1 {
- cpu = <&CPU7>;
- };
- };
- };
- };
-
- cluster1 {
- cluster0 {
- core0 {
- thread0 {
- cpu = <&CPU8>;
- };
- thread1 {
- cpu = <&CPU9>;
- };
- };
- core1 {
- thread0 {
- cpu = <&CPU10>;
- };
- thread1 {
- cpu = <&CPU11>;
- };
- };
- };
-
- cluster1 {
- core0 {
- thread0 {
- cpu = <&CPU12>;
- };
- thread1 {
- cpu = <&CPU13>;
- };
- };
- core1 {
- thread0 {
- cpu = <&CPU14>;
- };
- thread1 {
- cpu = <&CPU15>;
- };
- };
- };
- };
- };
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU2: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x100>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU3: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x101>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU4: cpu@10000 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x10000>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU5: cpu@10001 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x10001>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU6: cpu@10100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x10100>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU7: cpu@10101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x10101>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU8: cpu@100000000 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU9: cpu@100000001 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU10: cpu@100000100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x100>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU11: cpu@100000101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x101>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU12: cpu@100010000 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x10000>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU13: cpu@100010001 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x10001>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU14: cpu@100010100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x10100>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-
- CPU15: cpu@100010101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1 0x10101>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x20000000>;
- };
-};
-
-Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
-
-cpus {
- #size-cells = <0>;
- #address-cells = <1>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
- core1 {
- cpu = <&CPU1>;
- };
- core2 {
- cpu = <&CPU2>;
- };
- core3 {
- cpu = <&CPU3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&CPU4>;
- };
- core1 {
- cpu = <&CPU5>;
- };
- core2 {
- cpu = <&CPU6>;
- };
- core3 {
- cpu = <&CPU7>;
- };
- };
- };
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0x0>;
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0x1>;
- };
-
- CPU2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0x2>;
- };
-
- CPU3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0x3>;
- };
-
- CPU4: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x100>;
- };
-
- CPU5: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x101>;
- };
-
- CPU6: cpu@102 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x102>;
- };
-
- CPU7: cpu@103 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x103>;
- };
-};
-
-===============================================================================
-[1] ARM Linux kernel documentation
- Documentation/devicetree/bindings/arm/cpus.txt
new file mode 100644
@@ -0,0 +1,526 @@
+===========================================
+CPU topology binding description
+===========================================
+
+===========================================
+1 - Introduction
+===========================================
+
+In an ARM/RISC-V system, the hierarchy of CPUs is defined through three entities that
+are used to describe the layout of physical CPUs in the system:
+
+- cluster
+- core
+- thread
+
+The cpu nodes (bindings defined in [1] for ARM or [2] for RISC-V) represent the devices that
+correspond to physical CPUs and are to be mapped to the hierarchy levels.
+
+The bottom hierarchy level sits at core or thread level depending on whether
+symmetric multi-threading (SMT) is supported or not.
+
+For instance in a system where CPUs support SMT, "cpu" nodes represent all
+threads existing in the system and map to the hierarchy level "thread" above.
+In systems where SMT is not supported "cpu" nodes represent all cores present
+in the system and map to the hierarchy level "core" above.
+
+CPU topology bindings allow one to associate cpu nodes with hierarchical groups
+corresponding to the system hierarchy; syntactically they are defined as device
+tree nodes.
+
+The remainder of this document provides the topology bindings for ARM/RISC-V, based
+on the Devicetree Specification, available from:
+
+https://www.devicetree.org/specifications/
+
+If not stated otherwise, whenever a reference to a cpu node phandle is made its
+value must point to a cpu node compliant with the cpu node bindings as
+documented in [1].
+A topology description containing phandles to cpu nodes that are not compliant
+with bindings standardized in [1] is therefore considered invalid.
+
+===========================================
+2 - cpu-map node
+===========================================
+
+The ARM/RISC-V CPU topology is defined within the cpu-map node, which is a direct
+child of the cpus node and provides a container where the actual topology
+nodes are listed.
+
+- cpu-map node
+
+ Usage: Optional - On SMP systems provide CPUs topology to the OS.
+ Uniprocessor systems do not require a topology
+ description and therefore should not define a
+ cpu-map node.
+
+ Description: The cpu-map node is just a container node where its
+ subnodes describe the CPU topology.
+
+ Node name must be "cpu-map".
+
+ The cpu-map node's parent node must be the cpus node.
+
+ The cpu-map node's child nodes can be:
+
+ - one or more cluster nodes
+
+ Any other configuration is considered invalid.
+
+The cpu-map node can only contain three types of child nodes:
+
+- cluster node
+- core node
+- thread node
+
+whose bindings are described in paragraph 3.
+
+The nodes describing the CPU topology (cluster/core/thread) can only
+be defined within the cpu-map node and every core/thread in the system
+must be defined within the topology. Any other configuration is
+invalid and therefore must be ignored.
+
+===========================================
+2.1 - cpu-map child nodes naming convention
+===========================================
+
+cpu-map child nodes must follow a naming convention where the node name
+must be "clusterN", "coreN", "threadN" depending on the node type (ie
+cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which
+are siblings within a single common parent node must be given a unique and
+sequential N value, starting from 0).
+cpu-map child nodes which do not share a common parent node can have the same
+name (ie same number N as other cpu-map child nodes at different device tree
+levels) since name uniqueness will be guaranteed by the device tree hierarchy.
+
+===========================================
+3 - cluster/core/thread node bindings
+===========================================
+
+Bindings for cluster/cpu/thread nodes are defined as follows:
+
+- cluster node
+
+ Description: must be declared within a cpu-map node, one node
+ per cluster. A system can contain several layers of
+ clustering and cluster nodes can be contained in parent
+ cluster nodes.
+
+ The cluster node name must be "clusterN" as described in 2.1 above.
+ A cluster node can not be a leaf node.
+
+ A cluster node's child nodes must be:
+
+ - one or more cluster nodes; or
+ - one or more core nodes
+
+ Any other configuration is considered invalid.
+
+- core node
+
+ Description: must be declared in a cluster node, one node per core in
+ the cluster. If the system does not support SMT, core
+ nodes are leaf nodes, otherwise they become containers of
+ thread nodes.
+
+ The core node name must be "coreN" as described in 2.1 above.
+
+ A core node must be a leaf node if SMT is not supported.
+
+ Properties for core nodes that are leaf nodes:
+
+ - cpu
+ Usage: required
+ Value type: <phandle>
+ Definition: a phandle to the cpu node that corresponds to the
+ core node.
+
+ If a core node is not a leaf node (CPUs supporting SMT) a core node's
+ child nodes can be:
+
+ - one or more thread nodes
+
+ Any other configuration is considered invalid.
+
+- thread node
+
+ Description: must be declared in a core node, one node per thread
+ in the core if the system supports SMT. Thread nodes are
+ always leaf nodes in the device tree.
+
+ The thread node name must be "threadN" as described in 2.1 above.
+
+ A thread node must be a leaf node.
+
+ A thread node must contain the following property:
+
+ - cpu
+ Usage: required
+ Value type: <phandle>
+ Definition: a phandle to the cpu node that corresponds to
+ the thread node.
+
+===========================================
+4 - Example dts
+===========================================
+
+Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters):
+
+cpus {
+ #size-cells = <0>;
+ #address-cells = <2>;
+
+ cpu-map {
+ cluster0 {
+ cluster0 {
+ core0 {
+ thread0 {
+ cpu = <&CPU0>;
+ };
+ thread1 {
+ cpu = <&CPU1>;
+ };
+ };
+
+ core1 {
+ thread0 {
+ cpu = <&CPU2>;
+ };
+ thread1 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+
+ cluster1 {
+ core0 {
+ thread0 {
+ cpu = <&CPU4>;
+ };
+ thread1 {
+ cpu = <&CPU5>;
+ };
+ };
+
+ core1 {
+ thread0 {
+ cpu = <&CPU6>;
+ };
+ thread1 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ cluster1 {
+ cluster0 {
+ core0 {
+ thread0 {
+ cpu = <&CPU8>;
+ };
+ thread1 {
+ cpu = <&CPU9>;
+ };
+ };
+ core1 {
+ thread0 {
+ cpu = <&CPU10>;
+ };
+ thread1 {
+ cpu = <&CPU11>;
+ };
+ };
+ };
+
+ cluster1 {
+ core0 {
+ thread0 {
+ cpu = <&CPU12>;
+ };
+ thread1 {
+ cpu = <&CPU13>;
+ };
+ };
+ core1 {
+ thread0 {
+ cpu = <&CPU14>;
+ };
+ thread1 {
+ cpu = <&CPU15>;
+ };
+ };
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU4: cpu@10000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x10000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU5: cpu@10001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x10001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU6: cpu@10100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x10100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU7: cpu@10101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x10101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU8: cpu@100000000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU9: cpu@100000001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU10: cpu@100000100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU11: cpu@100000101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU12: cpu@100010000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x10000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU13: cpu@100010001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x10001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU14: cpu@100010100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x10100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+
+ CPU15: cpu@100010101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1 0x10101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20000000>;
+ };
+};
+
+Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
+
+cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x1>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x2>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x3>;
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x102>;
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x103>;
+ };
+};
+
+Example 3: HiFive Unleashed (RISC-V 64 bit, 4 core system)
+
+cpus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu540g", "sifive,fu500";
+ model = "sifive,hifive-unleashed-a00";
+
+ ...
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&L12>;
+ };
+ core1 {
+ cpu = <&L15>;
+ };
+ core2 {
+ cpu0 = <&L18>;
+ };
+ core3 {
+ cpu0 = <&L21>;
+ };
+ };
+ };
+
+ L12: cpu@1 {
+ device_type = "cpu";
+ compatible = "sifive,rocket0", "riscv";
+ reg = <0x1>;
+ }
+
+ L15: cpu@2 {
+ device_type = "cpu";
+ compatible = "sifive,rocket0", "riscv";
+ reg = <0x2>;
+ }
+ L18: cpu@3 {
+ device_type = "cpu";
+ compatible = "sifive,rocket0", "riscv";
+ reg = <0x3>;
+ }
+ L21: cpu@4 {
+ device_type = "cpu";
+ compatible = "sifive,rocket0", "riscv";
+ reg = <0x4>;
+ }
+};
+===============================================================================
+[1] ARM Linux kernel documentation
+ Documentation/devicetree/bindings/arm/cpus.txt
+[1] RISC-V Linux kernel documentation
+ Documentation/devicetree/bindings/riscv/cpus.txt
cpu-map binding can be used to described cpu topology for both RISC-V & ARM. It makes more sense to move the binding to document to a common place. The relevant discussion can be found here. https://lkml.org/lkml/2018/11/6/19 Signed-off-by: Atish Patra <atish.patra@wdc.com> --- Documentation/devicetree/bindings/arm/topology.txt | 475 ------------------- .../devicetree/bindings/cpu/cpu-topology.txt | 526 +++++++++++++++++++++ 2 files changed, 526 insertions(+), 475 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/topology.txt create mode 100644 Documentation/devicetree/bindings/cpu/cpu-topology.txt