diff mbox series

[RESEND,v8,4/4] clk: meson: add sub MMC clock controller driver

Message ID 1545219642-9834-5-git-send-email-jianxin.pan@amlogic.com (mailing list archive)
State New, archived
Headers show
Series clk: meson: add a sub EMMC clock controller support | expand

Commit Message

Jianxin Pan Dec. 19, 2018, 11:40 a.m. UTC
From: Yixun Lan <yixun.lan@amlogic.com>

The patch will add a MMC clock controller driver which used by MMC or NAND,
It provide a mux and divider clock, and three phase clocks - core, tx, tx.

Two clocks are provided as the parent of MMC clock controller from
upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform.

To specify which clock the MMC or NAND driver may consume,
the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header
can be used in the device tree sources.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 drivers/clk/meson/Kconfig    |   9 ++
 drivers/clk/meson/Makefile   |   1 +
 drivers/clk/meson/mmc-clkc.c | 304 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 314 insertions(+)
 create mode 100644 drivers/clk/meson/mmc-clkc.c

Comments

kernel test robot Dec. 31, 2018, 8:12 p.m. UTC | #1
Hi Yixun,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on clk/clk-next]
[also build test ERROR on next-20181224]
[cannot apply to v4.20]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Jianxin-Pan/clk-meson-add-a-sub-EMMC-clock-controller-support/20181222-060947
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: i386-randconfig-s0-12301806 (attached as .config)
compiler: gcc-6 (Debian 6.4.0-9) 6.4.0 20171026
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers/clk/meson/mmc-clkc.o: In function `mmc_clkc_register_mux':
>> drivers/clk/meson/mmc-clkc.c:182: undefined reference to `clk_regmap_mux_ops'

vim +182 drivers/clk/meson/mmc-clkc.c

   158	
   159	static struct clk_regmap *mmc_clkc_register_mux(struct device *dev,
   160							struct regmap *map)
   161	{
   162		const char *parent_names[MUX_CLK_NUM_PARENTS];
   163		struct clk_init_data init;
   164		struct clk_regmap *mux;
   165		struct clk *clk;
   166		int i;
   167	
   168		for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
   169			char name[8];
   170	
   171			snprintf(name, sizeof(name), "clkin%d", i);
   172			clk = devm_clk_get(dev, name);
   173			if (IS_ERR(clk)) {
   174				if (clk != ERR_PTR(-EPROBE_DEFER))
   175					dev_err(dev, "Missing clock %s\n", name);
   176				return ERR_CAST(clk);
   177			}
   178	
   179			parent_names[i] = __clk_get_name(clk);
   180		}
   181	
 > 182		init.ops = &clk_regmap_mux_ops;
   183		init.flags = CLK_SET_RATE_PARENT;
   184		init.parent_names = parent_names;
   185		init.num_parents = MUX_CLK_NUM_PARENTS;
   186	
   187		mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data);
   188		if (IS_ERR(mux))
   189			dev_err(dev, "Mux clock registration failed\n");
   190	
   191		return mux;
   192	}
   193	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
kernel test robot Dec. 31, 2018, 9:05 p.m. UTC | #2
Hi Yixun,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on clk/clk-next]
[also build test ERROR on next-20181224]
[cannot apply to v4.20]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Jianxin-Pan/clk-meson-add-a-sub-EMMC-clock-controller-support/20181222-060947
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: i386-randconfig-x079-12301332 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

>> ERROR: "clk_regmap_mux_ops" [drivers/clk/meson/mmc-clkc.ko] undefined!

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
diff mbox series

Patch

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..c84b0f7 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -15,6 +15,15 @@  config COMMON_CLK_MESON_AO
 	select COMMON_CLK_REGMAP_MESON
 	select RESET_CONTROLLER
 
+config COMMON_CLK_MMC_MESON
+	tristate "Meson MMC Sub Clock Controller Driver"
+	select MFD_SYSCON
+	select COMMON_CLK_AMLOGIC
+	help
+	  Support for the MMC sub clock controller on Amlogic Meson Platform,
+	  which include S905 (GXBB, GXL), A113D/X (AXG) devices.
+	  Say Y if you want this clock enabled.
+
 config COMMON_CLK_REGMAP_MESON
 	bool
 	select REGMAP
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index d59620d..54416a2 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -12,4 +12,5 @@  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
+obj-$(CONFIG_COMMON_CLK_MMC_MESON) 	+= mmc-clkc.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
new file mode 100644
index 0000000..2582a98
--- /dev/null
+++ b/drivers/clk/meson/mmc-clkc.c
@@ -0,0 +1,304 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Amlogic Meson MMC Sub Clock Controller Driver
+ *
+ * Copyright (c) 2017 Baylibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/amlogic,mmc-clkc.h>
+
+#include "clkc.h"
+
+/* clock ID used by internal driver */
+
+#define SD_EMMC_CLOCK		0
+#define CLK_DELAY_STEP_PS	200
+#define MUX_CLK_NUM_PARENTS	2
+#define MMC_MAX_CLKS		4
+
+struct mmc_clkc_data {
+	struct meson_clk_phase_delay_data tx;
+	struct meson_clk_phase_delay_data rx;
+};
+
+static struct clk_regmap_mux_data mmc_clkc_mux_data = {
+	.offset = SD_EMMC_CLOCK,
+	.mask   = 0x3,
+	.shift  = 6,
+};
+
+static const struct meson_sclk_div_data mmc_clkc_div_data = {
+	.div = {
+		.reg_off = SD_EMMC_CLOCK,
+		.width   = 6,
+	},
+	.flags = CLK_DIVIDER_ONE_BASED,
+};
+
+static struct meson_clk_phase_data mmc_clkc_core_phase = {
+	.ph = {
+		.reg_off = SD_EMMC_CLOCK,
+		.shift   = 8,
+		.width   = 2,
+	}
+};
+
+static const struct mmc_clkc_data mmc_clkc_gx_data = {
+	.tx = {
+		.phase = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 10,
+			.width   = 2,
+		},
+		.delay = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 16,
+			.width   = 4,
+		},
+		.delay_step_ps = CLK_DELAY_STEP_PS,
+	},
+	.rx = {
+		.phase = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 12,
+			.width   = 2,
+		},
+		.delay = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 20,
+			.width   = 4,
+		},
+		.delay_step_ps   = CLK_DELAY_STEP_PS,
+	},
+};
+
+static const struct mmc_clkc_data mmc_clkc_axg_data = {
+	.tx = {
+		.phase = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 10,
+			.width   = 2,
+		},
+		.delay = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 16,
+			.width   = 6,
+		},
+		.delay_step_ps   = CLK_DELAY_STEP_PS,
+	},
+	.rx = {
+		.phase = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 12,
+			.width   = 2,
+		},
+		.delay = {
+			.reg_off = SD_EMMC_CLOCK,
+			.shift   = 22,
+			.width   = 6,
+		},
+		.delay_step_ps   = CLK_DELAY_STEP_PS,
+	},
+};
+
+static const struct of_device_id mmc_clkc_match_table[] = {
+	{
+		.compatible	= "amlogic,gx-mmc-clkc",
+		.data		= &mmc_clkc_gx_data
+	},
+	{
+		.compatible	= "amlogic,axg-mmc-clkc",
+		.data		= &mmc_clkc_axg_data
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mmc_clkc_match_table);
+
+static struct clk_regmap *
+mmc_clkc_register_clk(struct device *dev, struct regmap *map,
+		      struct clk_init_data *init,
+		      const char *suffix, void *data)
+{
+	struct clk_regmap *clk;
+	char *name;
+	int ret;
+
+	clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
+
+	name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	init->name = name;
+	clk->map = map;
+	clk->data = data;
+	clk->hw.init = init;
+	ret = devm_clk_hw_register(dev, &clk->hw);
+	if (ret)
+		clk = ERR_PTR(ret);
+
+	kfree(name);
+	return clk;
+}
+
+static struct clk_regmap *mmc_clkc_register_mux(struct device *dev,
+						struct regmap *map)
+{
+	const char *parent_names[MUX_CLK_NUM_PARENTS];
+	struct clk_init_data init;
+	struct clk_regmap *mux;
+	struct clk *clk;
+	int i;
+
+	for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+		char name[8];
+
+		snprintf(name, sizeof(name), "clkin%d", i);
+		clk = devm_clk_get(dev, name);
+		if (IS_ERR(clk)) {
+			if (clk != ERR_PTR(-EPROBE_DEFER))
+				dev_err(dev, "Missing clock %s\n", name);
+			return ERR_CAST(clk);
+		}
+
+		parent_names[i] = __clk_get_name(clk);
+	}
+
+	init.ops = &clk_regmap_mux_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = parent_names;
+	init.num_parents = MUX_CLK_NUM_PARENTS;
+
+	mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data);
+	if (IS_ERR(mux))
+		dev_err(dev, "Mux clock registration failed\n");
+
+	return mux;
+}
+
+static struct clk_regmap *
+mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map,
+				  char *suffix, const struct clk_hw *hw,
+				  unsigned long flags,
+				  const struct clk_ops *ops, void *data)
+{
+	struct clk_init_data init;
+	struct clk_regmap *clk;
+	const char *parent_name = clk_hw_get_name(hw);
+
+	init.ops = ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = mmc_clkc_register_clk(dev, map, &init, suffix, data);
+	if (IS_ERR(clk))
+		dev_err(dev, "%s clock registration failed\n", suffix);
+
+	return clk;
+}
+
+static int mmc_clkc_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *onecell_data;
+	struct device *dev = &pdev->dev;
+	struct mmc_clkc_data *data;
+	struct regmap *map;
+	struct clk_regmap *clk, *core;
+	struct meson_sclk_div_data *div_data;
+
+	/*cast to drop the const in match->data*/
+	data = (struct mmc_clkc_data *)of_device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	map = syscon_node_to_regmap(dev->of_node);
+	if (IS_ERR(map)) {
+		dev_err(dev, "could not find mmc clock controller\n");
+		return PTR_ERR(map);
+	}
+
+	onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) +
+				    sizeof(*onecell_data->hws) * MMC_MAX_CLKS,
+				    GFP_KERNEL);
+	if (!onecell_data)
+		return -ENOMEM;
+
+	clk = mmc_clkc_register_mux(dev, map);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL);
+	if (!div_data)
+		return -ENOMEM;
+
+	memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data));
+	clk = mmc_clkc_register_clk_with_parent(dev, map, "div",
+						&clk->hw,
+						CLK_SET_RATE_PARENT,
+						&meson_sclk_div_ops,
+						div_data);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	onecell_data->hws[CLKID_MMC_DIV] = &clk->hw,
+
+	core = mmc_clkc_register_clk_with_parent(dev, map, "core",
+						 &clk->hw,
+						 CLK_SET_RATE_PARENT,
+						 &meson_clk_phase_ops,
+						 &mmc_clkc_core_phase);
+	if (IS_ERR(core))
+		return PTR_ERR(core);
+
+	onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw,
+
+	clk = mmc_clkc_register_clk_with_parent(dev, map, "rx",
+						&core->hw,  0,
+						&meson_clk_phase_delay_ops,
+						&data->rx);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw,
+	clk = mmc_clkc_register_clk_with_parent(dev, map, "tx",
+						&core->hw,  0,
+						&meson_clk_phase_delay_ops,
+						&data->tx);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw,
+	onecell_data->num = MMC_MAX_CLKS;
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   onecell_data);
+}
+
+static struct platform_driver mmc_clkc_driver = {
+	.probe		= mmc_clkc_probe,
+	.driver		= {
+		.name	= "meson-mmc-clkc",
+		.of_match_table = of_match_ptr(mmc_clkc_match_table),
+	},
+};
+
+module_platform_driver(mmc_clkc_driver);
+
+MODULE_DESCRIPTION("Amlogic AXG MMC clock driver");
+MODULE_AUTHOR("Jianxin Pan <jianxin.pan@amlogic.com>");
+MODULE_LICENSE("GPL v2");