diff mbox series

[v9,1/4] clk: meson: add one based divider support for sclk divider

Message ID 1546955444-7549-2-git-send-email-jianxin.pan@amlogic.com (mailing list archive)
State New, archived
Headers show
Series clk: meson: add a sub EMMC clock controller support | expand

Commit Message

Jianxin Pan Jan. 8, 2019, 1:50 p.m. UTC
When CLK_DIVIDER_ONE_BASED flag is set, the sclk divider will be:
one based divider (div = val), and zero value gates the clock

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 drivers/clk/meson/Makefile     |  3 ++-
 drivers/clk/meson/clkc-audio.h |  8 ------
 drivers/clk/meson/clkc.h       | 10 ++++++-
 drivers/clk/meson/sclk-div.c   | 59 ++++++++++++++++++++++++++++--------------
 4 files changed, 50 insertions(+), 30 deletions(-)

Comments

Jerome Brunet Jan. 22, 2019, 9:25 a.m. UTC | #1
On Tue, 2019-01-08 at 21:50 +0800, Jianxin Pan wrote:
> When CLK_DIVIDER_ONE_BASED flag is set, the sclk divider will be:
> one based divider (div = val), and zero value gates the clock
> 
> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
> ---
>  drivers/clk/meson/Makefile     |  3 ++-
>  drivers/clk/meson/clkc-audio.h |  8 ------
>  drivers/clk/meson/clkc.h       | 10 ++++++-
>  drivers/clk/meson/sclk-div.c   | 59 ++++++++++++++++++++++++++++-----------
> ---
>  4 files changed, 50 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index a849aa8..acd8694 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -4,7 +4,8 @@
>  
>  obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-
> pll-div.o
>  obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o
> -obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO)	+= clk-triphase.o sclk-div.o
> +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += sclk-div.o
> +obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o
>  obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
>  obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-
> 32k.o
> diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h
> index 0a7c157..286ff12 100644
> --- a/drivers/clk/meson/clkc-audio.h
> +++ b/drivers/clk/meson/clkc-audio.h
> @@ -15,14 +15,6 @@ struct meson_clk_triphase_data {
>  	struct parm ph2;
>  };
>  
> -struct meson_sclk_div_data {
> -	struct parm div;
> -	struct parm hi;
> -	unsigned int cached_div;
> -	struct clk_duty cached_duty;
> -};
> -
>  extern const struct clk_ops meson_clk_triphase_ops;
> -extern const struct clk_ops meson_sclk_div_ops;
>  
>  #endif /* __MESON_CLKC_AUDIO_H */
> diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
> index 6183b22..00b3320 100644
> --- a/drivers/clk/meson/clkc.h
> +++ b/drivers/clk/meson/clkc.h
> @@ -27,6 +27,14 @@ struct parm {
>  	u8	width;
>  };
>  
> +struct meson_sclk_div_data {
> +	struct parm div;
> +	struct parm hi;
> +	unsigned int cached_div;
> +	struct clk_duty cached_duty;
> +	u8 flags;
> +};
> +
>  static inline unsigned int meson_parm_read(struct regmap *map, struct parm
> *p)
>  {
>  	unsigned int val;
> @@ -118,10 +126,10 @@ struct clk_regmap _name = {				
> 		\
>  extern const struct clk_ops meson_clk_mpll_ops;
>  extern const struct clk_ops meson_clk_phase_ops;
>  extern const struct clk_ops meson_vid_pll_div_ro_ops;
> +extern const struct clk_ops meson_sclk_div_ops;
>  
>  struct clk_hw *meson_clk_hw_register_input(struct device *dev,
>  					   const char *of_name,
>  					   const char *clk_name,
>  					   unsigned long flags);
> -
>  #endif /* __CLKC_H */
> diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c
> index bc64019..a6c425b 100644
> --- a/drivers/clk/meson/sclk-div.c
> +++ b/drivers/clk/meson/sclk-div.c
> @@ -4,42 +4,60 @@
>   * Author: Jerome Brunet <jbrunet@baylibre.com>
>   *
>   * Sample clock generator divider:
> - * This HW divider gates with value 0 but is otherwise a zero based
> divider:
> + * This HW divider gates with value 0
>   *
>   * val >= 1
> - * divider = val + 1
> + * divider = val + 1 if ONE_BASED is not set, otherwise divider = val.
>   *
>   * The duty cycle may also be set for the LR clock variant. The duty cycle
>   * ratio is:
>   *
>   * hi = [0 - val]
> - * duty_cycle = (1 + hi) / (1 + val)
> + * duty_cycle = (1 + hi) / (1 + val) if ONE_BASED is not set, otherwise:
> + * duty_cycle = hi / (1 + val)
>   */
>  
> -#include "clkc-audio.h"
> +#include "clkc.h"
>  
> -static inline struct meson_sclk_div_data *
> -meson_sclk_div_data(struct clk_regmap *clk)
> +static inline int get_reg(int val, unsigned char flag)

s/get_reg/sclk_get_reg

>  {
> -	return (struct meson_sclk_div_data *)clk->data;
> +	WARN_ON(val < 1);

I don't think this WARN is justified, especially since you are using this
function to set the hi value.

> +	if ((flag & CLK_DIVIDER_ONE_BASED) || !val)

I don't like that you make a dependency on the generic divider just for this.
Please make your own flag like MESON_SCLK_ONE_BASED

> +		return val;
> +	else
> +		return val - 1;
> +}
> +
> +static inline int get_value(int reg, unsigned char flag)

s/get_value/sclk_get_divider

> +{
> +	if (flag & CLK_DIVIDER_ONE_BASED)
> +		return reg;
> +	else
> +		return reg + 1;
>  }
>  
> -static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
> +static inline struct meson_sclk_div_data *
> +meson_sclk_div_data(struct clk_regmap *clk)
>  {
> -	return (1 << sclk->div.width) - 1;
> +	return (struct meson_sclk_div_data *)clk->data;
>  }
>  
>  static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
>  {
> -	return sclk_div_maxval(sclk) + 1;
> +	unsigned int reg = clk_div_mask(sclk->div.width);

same here, leave the generic divider alone.
 
`(1 << sclk->div.width) - 1` was fine to get max register value.

> +
> +	return get_value(reg, sclk->flags);
>  }
>  
>  static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
>  			   unsigned long prate, int maxdiv)
>  {
>  	int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
> +	int mindiv = get_value(1, sclk->flags);

maxdiv is provided as a param while mindiv is computed inside this function.
let's be coherent and pick one approach.

>  
> -	return clamp(div, 2, maxdiv);
> +	return clamp(div, mindiv, maxdiv);
>  }
>  
>  static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
> @@ -47,7 +65,7 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned
> long rate,
>  			    struct meson_sclk_div_data *sclk)
>  {
>  	struct clk_hw *parent = clk_hw_get_parent(hw);
> -	int bestdiv = 0, i;
> +	int bestdiv = 0, i, mindiv;
>  	unsigned long maxdiv, now, parent_now;
>  	unsigned long best = 0, best_parent = 0;
>  
> @@ -64,8 +82,9 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned
> long rate,
>  	 * unsigned long in rate * i below
>  	 */
>  	maxdiv = min(ULONG_MAX / rate, maxdiv);
> +	mindiv = get_value(1, sclk->flags);
>  
> -	for (i = 2; i <= maxdiv; i++) {
> +	for (i = mindiv; i <= maxdiv; i++) {
>  		/*
>  		 * It's the most ideal case if the requested rate can be
>  		 * divided from parent clock without needing to change
> @@ -111,10 +130,7 @@ static void sclk_apply_ratio(struct clk_regmap *clk,
>  					    sclk->cached_duty.num,
>  					    sclk->cached_duty.den);
>  
> -	if (hi)
> -		hi -= 1;
> -
> -	meson_parm_write(clk->map, &sclk->hi, hi);
> +	meson_parm_write(clk->map, &sclk->hi, get_reg(hi, sclk->flags));
>  }
>  
>  static int sclk_div_set_duty_cycle(struct clk_hw *hw,
> @@ -145,7 +161,7 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
>  	}
>  
>  	hi = meson_parm_read(clk->map, &sclk->hi);
> -	duty->num = hi + 1;
> +	duty->num = get_value(hi, sclk->flags);
>  	duty->den = sclk->cached_div;
>  	return 0;
>  }
> @@ -153,10 +169,13 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
>  static void sclk_apply_divider(struct clk_regmap *clk,
>  			       struct meson_sclk_div_data *sclk)
>  {
> +	unsigned int div;
> +
>  	if (MESON_PARM_APPLICABLE(&sclk->hi))
>  		sclk_apply_ratio(clk, sclk);
>  
> -	meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
> +	div = get_reg(sclk->cached_div, sclk->flags);
> +	meson_parm_write(clk->map, &sclk->div, div);
>  }
>  
>  static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
> @@ -224,7 +243,7 @@ static void sclk_div_init(struct clk_hw *hw)
>  	if (!val)
>  		sclk->cached_div = sclk_div_maxdiv(sclk);
>  	else
> -		sclk->cached_div = val + 1;
> +		sclk->cached_div = get_value(val, sclk->flags);
>  
>  	sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
>  }
Jianxin Pan Jan. 24, 2019, 9:10 a.m. UTC | #2
Hi Jerome,

On 2019/1/22 17:25, Jerome Brunet wrote:
> On Tue, 2019-01-08 at 21:50 +0800, Jianxin Pan wrote:
>> When CLK_DIVIDER_ONE_BASED flag is set, the sclk divider will be:
>> one based divider (div = val), and zero value gates the clock
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>> ---
>>  drivers/clk/meson/Makefile     |  3 ++-
>>  drivers/clk/meson/clkc-audio.h |  8 ------
>>  drivers/clk/meson/clkc.h       | 10 ++++++-
>>  drivers/clk/meson/sclk-div.c   | 59 ++++++++++++++++++++++++++++-----------
>> ---
>>  4 files changed, 50 insertions(+), 30 deletions(-)
>>
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index a849aa8..acd8694 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -4,7 +4,8 @@
>>  
>>  obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-
>> pll-div.o
>>  obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o
>> -obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO)	+= clk-triphase.o sclk-div.o
>> +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += sclk-div.o
>> +obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o
>>  obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
>>  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
>>  obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-
>> 32k.o
>> diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h
>> index 0a7c157..286ff12 100644
>> --- a/drivers/clk/meson/clkc-audio.h
>> +++ b/drivers/clk/meson/clkc-audio.h
>> @@ -15,14 +15,6 @@ struct meson_clk_triphase_data {
>>  	struct parm ph2;
>>  };
>>  
>> -struct meson_sclk_div_data {
>> -	struct parm div;
>> -	struct parm hi;
>> -	unsigned int cached_div;
>> -	struct clk_duty cached_duty;
>> -};
>> -
>>  extern const struct clk_ops meson_clk_triphase_ops;
>> -extern const struct clk_ops meson_sclk_div_ops;
>>  
>>  #endif /* __MESON_CLKC_AUDIO_H */
>> diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
>> index 6183b22..00b3320 100644
>> --- a/drivers/clk/meson/clkc.h
>> +++ b/drivers/clk/meson/clkc.h
>> @@ -27,6 +27,14 @@ struct parm {
>>  	u8	width;
>>  };
>>  
>> +struct meson_sclk_div_data {
>> +	struct parm div;
>> +	struct parm hi;
>> +	unsigned int cached_div;
>> +	struct clk_duty cached_duty;
>> +	u8 flags;
>> +};
>> +
>>  static inline unsigned int meson_parm_read(struct regmap *map, struct parm
>> *p)
>>  {
>>  	unsigned int val;
>> @@ -118,10 +126,10 @@ struct clk_regmap _name = {				
>> 		\
>>  extern const struct clk_ops meson_clk_mpll_ops;
>>  extern const struct clk_ops meson_clk_phase_ops;
>>  extern const struct clk_ops meson_vid_pll_div_ro_ops;
>> +extern const struct clk_ops meson_sclk_div_ops;
>>  
>>  struct clk_hw *meson_clk_hw_register_input(struct device *dev,
>>  					   const char *of_name,
>>  					   const char *clk_name,
>>  					   unsigned long flags);
>> -
>>  #endif /* __CLKC_H */
>> diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c
>> index bc64019..a6c425b 100644
>> --- a/drivers/clk/meson/sclk-div.c
>> +++ b/drivers/clk/meson/sclk-div.c
>> @@ -4,42 +4,60 @@
>>   * Author: Jerome Brunet <jbrunet@baylibre.com>
>>   *
>>   * Sample clock generator divider:
>> - * This HW divider gates with value 0 but is otherwise a zero based
>> divider:
>> + * This HW divider gates with value 0
>>   *
>>   * val >= 1
>> - * divider = val + 1
>> + * divider = val + 1 if ONE_BASED is not set, otherwise divider = val.
>>   *
>>   * The duty cycle may also be set for the LR clock variant. The duty cycle
>>   * ratio is:
>>   *
>>   * hi = [0 - val]
>> - * duty_cycle = (1 + hi) / (1 + val)
>> + * duty_cycle = (1 + hi) / (1 + val) if ONE_BASED is not set, otherwise:
>> + * duty_cycle = hi / (1 + val)
>>   */
>>  
>> -#include "clkc-audio.h"
>> +#include "clkc.h"
>>  
>> -static inline struct meson_sclk_div_data *
>> -meson_sclk_div_data(struct clk_regmap *clk)
>> +static inline int get_reg(int val, unsigned char flag)
> 
> s/get_reg/sclk_get_reg
OK, I will rename get_reg and get_value in next version.
Thank you for the review.
> 
>>  {
>> -	return (struct meson_sclk_div_data *)clk->data;
>> +	WARN_ON(val < 1);
> 
> I don't think this WARN is justified, especially since you are using this
> function to set the hi value.
OK, it will remove it. Thank you.
> 
>> +	if ((flag & CLK_DIVIDER_ONE_BASED) || !val)
> 
> I don't like that you make a dependency on the generic divider just for this.
> Please make your own flag like MESON_SCLK_ONE_BASED
OK, I will define a new flag MESON_SCLK_ONE_BASED in drivers/clk/meson/clkc.h.
> 
>> +		return val;
>> +	else
>> +		return val - 1;
>> +}
>> +
>> +static inline int get_value(int reg, unsigned char flag)
> 
> s/get_value/sclk_get_divider
OK, I will rename it.
> 
>> +{
>> +	if (flag & CLK_DIVIDER_ONE_BASED)
>> +		return reg;
>> +	else
>> +		return reg + 1;
>>  }
>>  
>> -static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
>> +static inline struct meson_sclk_div_data *
>> +meson_sclk_div_data(struct clk_regmap *clk)
>>  {
>> -	return (1 << sclk->div.width) - 1;
>> +	return (struct meson_sclk_div_data *)clk->data;
>>  }
>>  
>>  static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
>>  {
>> -	return sclk_div_maxval(sclk) + 1;
>> +	unsigned int reg = clk_div_mask(sclk->div.width);
> 
> same here, leave the generic divider alone.
>  
> `(1 << sclk->div.width) - 1` was fine to get max register value.
> 
>> +
>> +	return get_value(reg, sclk->flags);
>>  }
>>  
>>  static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
>>  			   unsigned long prate, int maxdiv)
>>  {
>>  	int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
>> +	int mindiv = get_value(1, sclk->flags);
> 
> maxdiv is provided as a param while mindiv is computed inside this function.
> let's be coherent and pick one approach.
OK, I will compute min and max in this function both. 
Thank you for your review.
> 
>>  
>> -	return clamp(div, 2, maxdiv);
>> +	return clamp(div, mindiv, maxdiv);
>>  }
>>  
>>  static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
>> @@ -47,7 +65,7 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned
>> long rate,
>>  			    struct meson_sclk_div_data *sclk)
>>  {
>>  	struct clk_hw *parent = clk_hw_get_parent(hw);
>> -	int bestdiv = 0, i;
>> +	int bestdiv = 0, i, mindiv;
>>  	unsigned long maxdiv, now, parent_now;
>>  	unsigned long best = 0, best_parent = 0;
>>  
>> @@ -64,8 +82,9 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned
>> long rate,
>>  	 * unsigned long in rate * i below
>>  	 */
>>  	maxdiv = min(ULONG_MAX / rate, maxdiv);
>> +	mindiv = get_value(1, sclk->flags);
>>  
>> -	for (i = 2; i <= maxdiv; i++) {
>> +	for (i = mindiv; i <= maxdiv; i++) {
>>  		/*
>>  		 * It's the most ideal case if the requested rate can be
>>  		 * divided from parent clock without needing to change
>> @@ -111,10 +130,7 @@ static void sclk_apply_ratio(struct clk_regmap *clk,
>>  					    sclk->cached_duty.num,
>>  					    sclk->cached_duty.den);
>>  
>> -	if (hi)
>> -		hi -= 1;
>> -
>> -	meson_parm_write(clk->map, &sclk->hi, hi);
>> +	meson_parm_write(clk->map, &sclk->hi, get_reg(hi, sclk->flags));
>>  }
>>  
>>  static int sclk_div_set_duty_cycle(struct clk_hw *hw,
>> @@ -145,7 +161,7 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
>>  	}
>>  
>>  	hi = meson_parm_read(clk->map, &sclk->hi);
>> -	duty->num = hi + 1;
>> +	duty->num = get_value(hi, sclk->flags);
>>  	duty->den = sclk->cached_div;
>>  	return 0;
>>  }
>> @@ -153,10 +169,13 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
>>  static void sclk_apply_divider(struct clk_regmap *clk,
>>  			       struct meson_sclk_div_data *sclk)
>>  {
>> +	unsigned int div;
>> +
>>  	if (MESON_PARM_APPLICABLE(&sclk->hi))
>>  		sclk_apply_ratio(clk, sclk);
>>  
>> -	meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
>> +	div = get_reg(sclk->cached_div, sclk->flags);
>> +	meson_parm_write(clk->map, &sclk->div, div);
>>  }
>>  
>>  static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
>> @@ -224,7 +243,7 @@ static void sclk_div_init(struct clk_hw *hw)
>>  	if (!val)
>>  		sclk->cached_div = sclk_div_maxdiv(sclk);
>>  	else
>> -		sclk->cached_div = val + 1;
>> +		sclk->cached_div = get_value(val, sclk->flags);
>>  
>>  	sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
>>  }
> 
> 
> .
>
diff mbox series

Patch

diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index a849aa8..acd8694 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,7 +4,8 @@ 
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o
-obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO)	+= clk-triphase.o sclk-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += sclk-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o
 obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h
index 0a7c157..286ff12 100644
--- a/drivers/clk/meson/clkc-audio.h
+++ b/drivers/clk/meson/clkc-audio.h
@@ -15,14 +15,6 @@  struct meson_clk_triphase_data {
 	struct parm ph2;
 };
 
-struct meson_sclk_div_data {
-	struct parm div;
-	struct parm hi;
-	unsigned int cached_div;
-	struct clk_duty cached_duty;
-};
-
 extern const struct clk_ops meson_clk_triphase_ops;
-extern const struct clk_ops meson_sclk_div_ops;
 
 #endif /* __MESON_CLKC_AUDIO_H */
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 6183b22..00b3320 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -27,6 +27,14 @@  struct parm {
 	u8	width;
 };
 
+struct meson_sclk_div_data {
+	struct parm div;
+	struct parm hi;
+	unsigned int cached_div;
+	struct clk_duty cached_duty;
+	u8 flags;
+};
+
 static inline unsigned int meson_parm_read(struct regmap *map, struct parm *p)
 {
 	unsigned int val;
@@ -118,10 +126,10 @@  struct clk_regmap _name = {						\
 extern const struct clk_ops meson_clk_mpll_ops;
 extern const struct clk_ops meson_clk_phase_ops;
 extern const struct clk_ops meson_vid_pll_div_ro_ops;
+extern const struct clk_ops meson_sclk_div_ops;
 
 struct clk_hw *meson_clk_hw_register_input(struct device *dev,
 					   const char *of_name,
 					   const char *clk_name,
 					   unsigned long flags);
-
 #endif /* __CLKC_H */
diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c
index bc64019..a6c425b 100644
--- a/drivers/clk/meson/sclk-div.c
+++ b/drivers/clk/meson/sclk-div.c
@@ -4,42 +4,60 @@ 
  * Author: Jerome Brunet <jbrunet@baylibre.com>
  *
  * Sample clock generator divider:
- * This HW divider gates with value 0 but is otherwise a zero based divider:
+ * This HW divider gates with value 0
  *
  * val >= 1
- * divider = val + 1
+ * divider = val + 1 if ONE_BASED is not set, otherwise divider = val.
  *
  * The duty cycle may also be set for the LR clock variant. The duty cycle
  * ratio is:
  *
  * hi = [0 - val]
- * duty_cycle = (1 + hi) / (1 + val)
+ * duty_cycle = (1 + hi) / (1 + val) if ONE_BASED is not set, otherwise:
+ * duty_cycle = hi / (1 + val)
  */
 
-#include "clkc-audio.h"
+#include "clkc.h"
 
-static inline struct meson_sclk_div_data *
-meson_sclk_div_data(struct clk_regmap *clk)
+static inline int get_reg(int val, unsigned char flag)
 {
-	return (struct meson_sclk_div_data *)clk->data;
+	WARN_ON(val < 1);
+	if ((flag & CLK_DIVIDER_ONE_BASED) || !val)
+		return val;
+	else
+		return val - 1;
+}
+
+static inline int get_value(int reg, unsigned char flag)
+{
+	if (flag & CLK_DIVIDER_ONE_BASED)
+		return reg;
+	else
+		return reg + 1;
 }
 
-static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
+static inline struct meson_sclk_div_data *
+meson_sclk_div_data(struct clk_regmap *clk)
 {
-	return (1 << sclk->div.width) - 1;
+	return (struct meson_sclk_div_data *)clk->data;
 }
 
 static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
 {
-	return sclk_div_maxval(sclk) + 1;
+	unsigned int reg = clk_div_mask(sclk->div.width);
+
+	return get_value(reg, sclk->flags);
 }
 
 static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
 			   unsigned long prate, int maxdiv)
 {
 	int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+	int mindiv = get_value(1, sclk->flags);
 
-	return clamp(div, 2, maxdiv);
+	return clamp(div, mindiv, maxdiv);
 }
 
 static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
@@ -47,7 +65,7 @@  static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
 			    struct meson_sclk_div_data *sclk)
 {
 	struct clk_hw *parent = clk_hw_get_parent(hw);
-	int bestdiv = 0, i;
+	int bestdiv = 0, i, mindiv;
 	unsigned long maxdiv, now, parent_now;
 	unsigned long best = 0, best_parent = 0;
 
@@ -64,8 +82,9 @@  static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
 	 * unsigned long in rate * i below
 	 */
 	maxdiv = min(ULONG_MAX / rate, maxdiv);
+	mindiv = get_value(1, sclk->flags);
 
-	for (i = 2; i <= maxdiv; i++) {
+	for (i = mindiv; i <= maxdiv; i++) {
 		/*
 		 * It's the most ideal case if the requested rate can be
 		 * divided from parent clock without needing to change
@@ -111,10 +130,7 @@  static void sclk_apply_ratio(struct clk_regmap *clk,
 					    sclk->cached_duty.num,
 					    sclk->cached_duty.den);
 
-	if (hi)
-		hi -= 1;
-
-	meson_parm_write(clk->map, &sclk->hi, hi);
+	meson_parm_write(clk->map, &sclk->hi, get_reg(hi, sclk->flags));
 }
 
 static int sclk_div_set_duty_cycle(struct clk_hw *hw,
@@ -145,7 +161,7 @@  static int sclk_div_get_duty_cycle(struct clk_hw *hw,
 	}
 
 	hi = meson_parm_read(clk->map, &sclk->hi);
-	duty->num = hi + 1;
+	duty->num = get_value(hi, sclk->flags);
 	duty->den = sclk->cached_div;
 	return 0;
 }
@@ -153,10 +169,13 @@  static int sclk_div_get_duty_cycle(struct clk_hw *hw,
 static void sclk_apply_divider(struct clk_regmap *clk,
 			       struct meson_sclk_div_data *sclk)
 {
+	unsigned int div;
+
 	if (MESON_PARM_APPLICABLE(&sclk->hi))
 		sclk_apply_ratio(clk, sclk);
 
-	meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
+	div = get_reg(sclk->cached_div, sclk->flags);
+	meson_parm_write(clk->map, &sclk->div, div);
 }
 
 static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -224,7 +243,7 @@  static void sclk_div_init(struct clk_hw *hw)
 	if (!val)
 		sclk->cached_div = sclk_div_maxdiv(sclk);
 	else
-		sclk->cached_div = val + 1;
+		sclk->cached_div = get_value(val, sclk->flags);
 
 	sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
 }