diff mbox series

[v2,2/4] tee: optee: add TEE bus device enumeration support

Message ID 1547123097-16431-3-git-send-email-sumit.garg@linaro.org (mailing list archive)
State New, archived
Headers show
Series Introduce TEE bus driver framework | expand

Commit Message

Sumit Garg Jan. 10, 2019, 12:24 p.m. UTC
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/
services for TEE bus. So implement device enumeration using invoke
function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of
device UUIDs. Also register these enumerated devices with TEE bus as
"optee-clntX" device.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 drivers/tee/optee/Makefile        |   1 +
 drivers/tee/optee/core.c          |   4 +
 drivers/tee/optee/device.c        | 150 ++++++++++++++++++++++++++++++++++++++
 drivers/tee/optee/optee_private.h |   3 +
 4 files changed, 158 insertions(+)
 create mode 100644 drivers/tee/optee/device.c

Comments

Daniel Thompson Jan. 10, 2019, 2:18 p.m. UTC | #1
On Thu, Jan 10, 2019 at 05:54:55PM +0530, Sumit Garg wrote:
> OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/
> services for TEE bus. So implement device enumeration using invoke
> function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of
> device UUIDs. Also register these enumerated devices with TEE bus as
> "optee-clntX" device.
> 
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> ---
>  drivers/tee/optee/Makefile        |   1 +
>  drivers/tee/optee/core.c          |   4 +
>  drivers/tee/optee/device.c        | 150 ++++++++++++++++++++++++++++++++++++++
>  drivers/tee/optee/optee_private.h |   3 +
>  4 files changed, 158 insertions(+)
>  create mode 100644 drivers/tee/optee/device.c
> 
> diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
> index 48d262a..56263ae 100644
> --- a/drivers/tee/optee/Makefile
> +++ b/drivers/tee/optee/Makefile
> @@ -5,3 +5,4 @@ optee-objs += call.o
>  optee-objs += rpc.o
>  optee-objs += supp.o
>  optee-objs += shm_pool.o
> +optee-objs += device.o
> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> index e5efce3..ac59c77 100644
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -634,6 +634,10 @@ static struct optee *optee_probe(struct device_node *np)
>  	if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM)
>  		pr_info("dynamic shared memory is enabled\n");
>  
> +	rc = optee_enumerate_devices();
> +	if (rc)
> +		goto err;
> +
>  	pr_info("initialized driver\n");
>  	return optee;
>  err:
> diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> new file mode 100644
> index 0000000..b38d24b
> --- /dev/null
> +++ b/drivers/tee/optee/device.c
> @@ -0,0 +1,150 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Linaro Ltd.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/tee_drv.h>
> +#include <linux/uuid.h>
> +#include "optee_private.h"
> +
> +/*
> + * Get device UUIDs
> + *
> + * [out]     memref[0]        Array of device UUIDs
> + *
> + * Return codes:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
> + */
> +#define PTA_CMD_GET_DEVICES		0x0
> +
> +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> +	if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> +		return 1;
> +	else
> +		return 0;
> +}
> +
> +static int get_devices(struct tee_context *ctx, u32 session,
> +		       struct tee_shm *device_uuid, u32 *shm_size)

Missing const on device_uuid?


> +{
> +	u32 ret = 0;
> +	struct tee_ioctl_invoke_arg inv_arg = {0};
> +	struct tee_param param[4] = {0};
> +
> +	/* Invoke PTA_CMD_GET_DEVICES function */
> +	inv_arg.func = PTA_CMD_GET_DEVICES;
> +	inv_arg.session = session;
> +	inv_arg.num_params = 4;
> +
> +	/* Fill invoke cmd params */
> +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
> +	param[0].u.memref.shm = device_uuid;
> +	param[0].u.memref.size = *shm_size;
> +	param[0].u.memref.shm_offs = 0;
> +
> +	ret = tee_client_invoke_func(ctx, &inv_arg, param);
> +	if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
> +			  (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
> +		pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
> +		       inv_arg.ret);
> +		return -EINVAL;
> +	}
> +
> +	*shm_size = param[0].u.memref.size;
> +
> +	return 0;
> +}
> +
> +static int optee_register_device(uuid_t *device_uuid, u32 device_id)

const?


> +{
> +	struct tee_client_device *optee_device = NULL;
> +	int rc;
> +
> +	optee_device = kzalloc(sizeof(*optee_device), GFP_KERNEL);
> +	if (!optee_device)
> +		return -ENOMEM;
> +
> +	optee_device->dev.bus = &tee_bus_type;
> +	dev_set_name(&optee_device->dev, "optee-clnt%u", device_id);
> +	uuid_copy(&optee_device->id.uuid, device_uuid);
> +
> +	rc = device_register(&optee_device->dev);
> +	if (rc)
> +		pr_err("device registration failed, err: %d\n", rc);

Leak optee_device?


> +
> +	return rc;
> +}
> +
> +int optee_enumerate_devices(void)
> +{
> +	uuid_t pta_uuid =
> +		UUID_INIT(0x7011a688, 0xddde, 0x4053,
> +			  0xa5, 0xa9, 0x7b, 0x3c, 0x4d, 0xdf, 0x13, 0xb8);

I think this could/should be const too.


> +	struct tee_ioctl_open_session_arg sess_arg = {0};
> +	struct tee_shm *device_shm = NULL;
> +	uuid_t *device_uuid = NULL;
> +	struct tee_context *ctx = NULL;
> +	u32 shm_size = 0, idx = 0;
> +	int rc;
> +
> +	/* Open context with OP-TEE driver */
> +	ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> +	if (IS_ERR(ctx))
> +		return -ENODEV;
> +
> +	/* Open session with device enumeration pseudo TA */
> +	memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN);
> +	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> +	sess_arg.num_params = 0;
> +
> +	rc = tee_client_open_session(ctx, &sess_arg, NULL);
> +	if ((rc < 0) || (sess_arg.ret != TEEC_SUCCESS)) {
> +		/* Device enumeration pseudo TA not found */
> +		rc = 0;
> +		goto out_ctx;
> +	}
> +
> +	rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);

Use NULL and 0 directly here instead of relying on initialized values.
This makes it clear we are fetching the size of a buffer and are doing
something different to the next call to get_devices().


> +	if (rc < 0)
> +		goto out_sess;
> +
> +	device_shm = tee_shm_alloc(ctx, shm_size,
> +				   TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> +	if (IS_ERR(device_shm)) {
> +		pr_err("tee_shm_alloc failed\n");
> +		rc = PTR_ERR(device_shm);
> +		goto out_sess;
> +	}
> +
> +	rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> +	if (rc < 0)
> +		goto out_shm;
> +
> +	device_uuid = tee_shm_get_va(device_shm, 0);
> +	if (IS_ERR(device_uuid)) {
> +		pr_err("tee_shm_get_va failed\n");
> +		rc = PTR_ERR(device_uuid);
> +		goto out_shm;
> +	}
> +
> +	while (idx < shm_size / sizeof(uuid_t)) {

This is a very uncommon way to write a for loop ;-).


> +		rc = optee_register_device(&device_uuid[idx], idx);
> +		if (rc)
> +			goto out_shm;
> +		idx++;
> +	}
> +
> +out_shm:
> +	tee_shm_free(device_shm);
> +out_sess:
> +	tee_client_close_session(ctx, sess_arg.session);
> +out_ctx:
> +	tee_client_close_context(ctx);
> +
> +	return rc;
> +}
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index 35e7938..a5e84af 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -28,6 +28,7 @@
>  #define TEEC_ERROR_BAD_PARAMETERS	0xFFFF0006
>  #define TEEC_ERROR_COMMUNICATION	0xFFFF000E
>  #define TEEC_ERROR_OUT_OF_MEMORY	0xFFFF000C
> +#define TEEC_ERROR_SHORT_BUFFER		0xFFFF0010
>  
>  #define TEEC_ORIGIN_COMMS		0x00000002
>  
> @@ -181,6 +182,8 @@ void optee_free_pages_list(void *array, size_t num_entries);
>  void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
>  			   size_t page_offset);
>  
> +int optee_enumerate_devices(void);
> +
>  /*
>   * Small helpers
>   */
> -- 
> 2.7.4
>
Sumit Garg Jan. 11, 2019, 7:22 a.m. UTC | #2
On Thu, 10 Jan 2019 at 19:49, Daniel Thompson
<daniel.thompson@linaro.org> wrote:
>
> On Thu, Jan 10, 2019 at 05:54:55PM +0530, Sumit Garg wrote:
> > OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/
> > services for TEE bus. So implement device enumeration using invoke
> > function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of
> > device UUIDs. Also register these enumerated devices with TEE bus as
> > "optee-clntX" device.
> >
> > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > ---
> >  drivers/tee/optee/Makefile        |   1 +
> >  drivers/tee/optee/core.c          |   4 +
> >  drivers/tee/optee/device.c        | 150 ++++++++++++++++++++++++++++++++++++++
> >  drivers/tee/optee/optee_private.h |   3 +
> >  4 files changed, 158 insertions(+)
> >  create mode 100644 drivers/tee/optee/device.c
> >
> > diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
> > index 48d262a..56263ae 100644
> > --- a/drivers/tee/optee/Makefile
> > +++ b/drivers/tee/optee/Makefile
> > @@ -5,3 +5,4 @@ optee-objs += call.o
> >  optee-objs += rpc.o
> >  optee-objs += supp.o
> >  optee-objs += shm_pool.o
> > +optee-objs += device.o
> > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > index e5efce3..ac59c77 100644
> > --- a/drivers/tee/optee/core.c
> > +++ b/drivers/tee/optee/core.c
> > @@ -634,6 +634,10 @@ static struct optee *optee_probe(struct device_node *np)
> >       if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM)
> >               pr_info("dynamic shared memory is enabled\n");
> >
> > +     rc = optee_enumerate_devices();
> > +     if (rc)
> > +             goto err;
> > +
> >       pr_info("initialized driver\n");
> >       return optee;
> >  err:
> > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> > new file mode 100644
> > index 0000000..b38d24b
> > --- /dev/null
> > +++ b/drivers/tee/optee/device.c
> > @@ -0,0 +1,150 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019 Linaro Ltd.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/slab.h>
> > +#include <linux/tee_drv.h>
> > +#include <linux/uuid.h>
> > +#include "optee_private.h"
> > +
> > +/*
> > + * Get device UUIDs
> > + *
> > + * [out]     memref[0]        Array of device UUIDs
> > + *
> > + * Return codes:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
> > + */
> > +#define PTA_CMD_GET_DEVICES          0x0
> > +
> > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> > +{
> > +     if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> > +             return 1;
> > +     else
> > +             return 0;
> > +}
> > +
> > +static int get_devices(struct tee_context *ctx, u32 session,
> > +                    struct tee_shm *device_uuid, u32 *shm_size)
>
> Missing const on device_uuid?
>

I don't think we should have a const for device_uuid here as this is
shared memory struct pointer which is dynamically allocated and used
to fetch device UUIDs.

>
> > +{
> > +     u32 ret = 0;
> > +     struct tee_ioctl_invoke_arg inv_arg = {0};
> > +     struct tee_param param[4] = {0};
> > +
> > +     /* Invoke PTA_CMD_GET_DEVICES function */
> > +     inv_arg.func = PTA_CMD_GET_DEVICES;
> > +     inv_arg.session = session;
> > +     inv_arg.num_params = 4;
> > +
> > +     /* Fill invoke cmd params */
> > +     param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
> > +     param[0].u.memref.shm = device_uuid;
> > +     param[0].u.memref.size = *shm_size;
> > +     param[0].u.memref.shm_offs = 0;
> > +
> > +     ret = tee_client_invoke_func(ctx, &inv_arg, param);
> > +     if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
> > +                       (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
> > +             pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
> > +                    inv_arg.ret);
> > +             return -EINVAL;
> > +     }
> > +
> > +     *shm_size = param[0].u.memref.size;
> > +
> > +     return 0;
> > +}
> > +
> > +static int optee_register_device(uuid_t *device_uuid, u32 device_id)
>
> const?
>

Will add const here.

>
> > +{
> > +     struct tee_client_device *optee_device = NULL;
> > +     int rc;
> > +
> > +     optee_device = kzalloc(sizeof(*optee_device), GFP_KERNEL);
> > +     if (!optee_device)
> > +             return -ENOMEM;
> > +
> > +     optee_device->dev.bus = &tee_bus_type;
> > +     dev_set_name(&optee_device->dev, "optee-clnt%u", device_id);
> > +     uuid_copy(&optee_device->id.uuid, device_uuid);
> > +
> > +     rc = device_register(&optee_device->dev);
> > +     if (rc)
> > +             pr_err("device registration failed, err: %d\n", rc);
>
> Leak optee_device?
>

Will fix.

>
> > +
> > +     return rc;
> > +}
> > +
> > +int optee_enumerate_devices(void)
> > +{
> > +     uuid_t pta_uuid =
> > +             UUID_INIT(0x7011a688, 0xddde, 0x4053,
> > +                       0xa5, 0xa9, 0x7b, 0x3c, 0x4d, 0xdf, 0x13, 0xb8);
>
> I think this could/should be const too.
>

Agree, will add const here too.

>
> > +     struct tee_ioctl_open_session_arg sess_arg = {0};
> > +     struct tee_shm *device_shm = NULL;
> > +     uuid_t *device_uuid = NULL;
> > +     struct tee_context *ctx = NULL;
> > +     u32 shm_size = 0, idx = 0;
> > +     int rc;
> > +
> > +     /* Open context with OP-TEE driver */
> > +     ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> > +     if (IS_ERR(ctx))
> > +             return -ENODEV;
> > +
> > +     /* Open session with device enumeration pseudo TA */
> > +     memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN);
> > +     sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> > +     sess_arg.num_params = 0;
> > +
> > +     rc = tee_client_open_session(ctx, &sess_arg, NULL);
> > +     if ((rc < 0) || (sess_arg.ret != TEEC_SUCCESS)) {
> > +             /* Device enumeration pseudo TA not found */
> > +             rc = 0;
> > +             goto out_ctx;
> > +     }
> > +
> > +     rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
>
> Use NULL and 0 directly here instead of relying on initialized values.
> This makes it clear we are fetching the size of a buffer and are doing
> something different to the next call to get_devices().
>

Ok, will directly pass NULL here.

>
> > +     if (rc < 0)
> > +             goto out_sess;
> > +
> > +     device_shm = tee_shm_alloc(ctx, shm_size,
> > +                                TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> > +     if (IS_ERR(device_shm)) {
> > +             pr_err("tee_shm_alloc failed\n");
> > +             rc = PTR_ERR(device_shm);
> > +             goto out_sess;
> > +     }
> > +
> > +     rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> > +     if (rc < 0)
> > +             goto out_shm;
> > +
> > +     device_uuid = tee_shm_get_va(device_shm, 0);
> > +     if (IS_ERR(device_uuid)) {
> > +             pr_err("tee_shm_get_va failed\n");
> > +             rc = PTR_ERR(device_uuid);
> > +             goto out_shm;
> > +     }
> > +
> > +     while (idx < shm_size / sizeof(uuid_t)) {
>
> This is a very uncommon way to write a for loop ;-).
>

Ok, will add "num_devices" variable.

-Sumit

>
> > +             rc = optee_register_device(&device_uuid[idx], idx);
> > +             if (rc)
> > +                     goto out_shm;
> > +             idx++;
> > +     }
> > +
> > +out_shm:
> > +     tee_shm_free(device_shm);
> > +out_sess:
> > +     tee_client_close_session(ctx, sess_arg.session);
> > +out_ctx:
> > +     tee_client_close_context(ctx);
> > +
> > +     return rc;
> > +}
> > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > index 35e7938..a5e84af 100644
> > --- a/drivers/tee/optee/optee_private.h
> > +++ b/drivers/tee/optee/optee_private.h
> > @@ -28,6 +28,7 @@
> >  #define TEEC_ERROR_BAD_PARAMETERS    0xFFFF0006
> >  #define TEEC_ERROR_COMMUNICATION     0xFFFF000E
> >  #define TEEC_ERROR_OUT_OF_MEMORY     0xFFFF000C
> > +#define TEEC_ERROR_SHORT_BUFFER              0xFFFF0010
> >
> >  #define TEEC_ORIGIN_COMMS            0x00000002
> >
> > @@ -181,6 +182,8 @@ void optee_free_pages_list(void *array, size_t num_entries);
> >  void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
> >                          size_t page_offset);
> >
> > +int optee_enumerate_devices(void);
> > +
> >  /*
> >   * Small helpers
> >   */
> > --
> > 2.7.4
> >
Daniel Thompson Jan. 11, 2019, 9:39 a.m. UTC | #3
On Fri, Jan 11, 2019 at 12:52:19PM +0530, Sumit Garg wrote:
> On Thu, 10 Jan 2019 at 19:49, Daniel Thompson
> <daniel.thompson@linaro.org> wrote:
> > > +static int get_devices(struct tee_context *ctx, u32 session,
> > > +                    struct tee_shm *device_uuid, u32 *shm_size)
> >
> > Missing const on device_uuid?
> >
> 
> I don't think we should have a const for device_uuid here as this is
> shared memory struct pointer which is dynamically allocated and used
> to fetch device UUIDs.

Agree. Perhaps device_uuid is misnamed though (part of the reason I
misread this is that it is singular so I though it was a single UUID
travelling into the TZ).

> > > +     rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> > > +     if (rc < 0)
> > > +             goto out_shm;
> > > +
> > > +     device_uuid = tee_shm_get_va(device_shm, 0);
> > > +     if (IS_ERR(device_uuid)) {
> > > +             pr_err("tee_shm_get_va failed\n");
> > > +             rc = PTR_ERR(device_uuid);
> > > +             goto out_shm;
> > > +     }
> > > +
> > > +     while (idx < shm_size / sizeof(uuid_t)) {
> >
> > This is a very uncommon way to write a for loop ;-).
> >
> 
> Ok, will add "num_devices" variable.

num_devices might add readability but that is not what I meant.

The most idiomatic way to write somthing that loops for every valid index
value is:

	for (i=0; i < limit; i++)

You wrote it like this:

	int idx=0;

	/* lots of code between initializer and first use */

	while (idx < limit) {
		/* more code */
		idx++;
	}

Sure, they are equivalent but the idiomatic form is easier to read.


Daniel.
Sumit Garg Jan. 11, 2019, 9:51 a.m. UTC | #4
On Fri, 11 Jan 2019 at 15:09, Daniel Thompson
<daniel.thompson@linaro.org> wrote:
>
> On Fri, Jan 11, 2019 at 12:52:19PM +0530, Sumit Garg wrote:
> > On Thu, 10 Jan 2019 at 19:49, Daniel Thompson
> > <daniel.thompson@linaro.org> wrote:
> > > > +static int get_devices(struct tee_context *ctx, u32 session,
> > > > +                    struct tee_shm *device_uuid, u32 *shm_size)
> > >
> > > Missing const on device_uuid?
> > >
> >
> > I don't think we should have a const for device_uuid here as this is
> > shared memory struct pointer which is dynamically allocated and used
> > to fetch device UUIDs.
>
> Agree. Perhaps device_uuid is misnamed though (part of the reason I
> misread this is that it is singular so I though it was a single UUID
> travelling into the TZ).
>

Will rename it to device_shm instead.

> > > > +     rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> > > > +     if (rc < 0)
> > > > +             goto out_shm;
> > > > +
> > > > +     device_uuid = tee_shm_get_va(device_shm, 0);
> > > > +     if (IS_ERR(device_uuid)) {
> > > > +             pr_err("tee_shm_get_va failed\n");
> > > > +             rc = PTR_ERR(device_uuid);
> > > > +             goto out_shm;
> > > > +     }
> > > > +
> > > > +     while (idx < shm_size / sizeof(uuid_t)) {
> > >
> > > This is a very uncommon way to write a for loop ;-).
> > >
> >
> > Ok, will add "num_devices" variable.
>
> num_devices might add readability but that is not what I meant.
>
> The most idiomatic way to write somthing that loops for every valid index
> value is:
>
>         for (i=0; i < limit; i++)
>
> You wrote it like this:
>
>         int idx=0;
>
>         /* lots of code between initializer and first use */
>
>         while (idx < limit) {
>                 /* more code */
>                 idx++;
>         }
>
> Sure, they are equivalent but the idiomatic form is easier to read.
>

Oh okay, will use "for" loop instead.

-Sumit

>
> Daniel.
diff mbox series

Patch

diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
index 48d262a..56263ae 100644
--- a/drivers/tee/optee/Makefile
+++ b/drivers/tee/optee/Makefile
@@ -5,3 +5,4 @@  optee-objs += call.o
 optee-objs += rpc.o
 optee-objs += supp.o
 optee-objs += shm_pool.o
+optee-objs += device.o
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index e5efce3..ac59c77 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -634,6 +634,10 @@  static struct optee *optee_probe(struct device_node *np)
 	if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM)
 		pr_info("dynamic shared memory is enabled\n");
 
+	rc = optee_enumerate_devices();
+	if (rc)
+		goto err;
+
 	pr_info("initialized driver\n");
 	return optee;
 err:
diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
new file mode 100644
index 0000000..b38d24b
--- /dev/null
+++ b/drivers/tee/optee/device.c
@@ -0,0 +1,150 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+#include "optee_private.h"
+
+/*
+ * Get device UUIDs
+ *
+ * [out]     memref[0]        Array of device UUIDs
+ *
+ * Return codes:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
+ */
+#define PTA_CMD_GET_DEVICES		0x0
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+	if (ver->impl_id == TEE_IMPL_ID_OPTEE)
+		return 1;
+	else
+		return 0;
+}
+
+static int get_devices(struct tee_context *ctx, u32 session,
+		       struct tee_shm *device_uuid, u32 *shm_size)
+{
+	u32 ret = 0;
+	struct tee_ioctl_invoke_arg inv_arg = {0};
+	struct tee_param param[4] = {0};
+
+	/* Invoke PTA_CMD_GET_DEVICES function */
+	inv_arg.func = PTA_CMD_GET_DEVICES;
+	inv_arg.session = session;
+	inv_arg.num_params = 4;
+
+	/* Fill invoke cmd params */
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
+	param[0].u.memref.shm = device_uuid;
+	param[0].u.memref.size = *shm_size;
+	param[0].u.memref.shm_offs = 0;
+
+	ret = tee_client_invoke_func(ctx, &inv_arg, param);
+	if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
+			  (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
+		pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
+		       inv_arg.ret);
+		return -EINVAL;
+	}
+
+	*shm_size = param[0].u.memref.size;
+
+	return 0;
+}
+
+static int optee_register_device(uuid_t *device_uuid, u32 device_id)
+{
+	struct tee_client_device *optee_device = NULL;
+	int rc;
+
+	optee_device = kzalloc(sizeof(*optee_device), GFP_KERNEL);
+	if (!optee_device)
+		return -ENOMEM;
+
+	optee_device->dev.bus = &tee_bus_type;
+	dev_set_name(&optee_device->dev, "optee-clnt%u", device_id);
+	uuid_copy(&optee_device->id.uuid, device_uuid);
+
+	rc = device_register(&optee_device->dev);
+	if (rc)
+		pr_err("device registration failed, err: %d\n", rc);
+
+	return rc;
+}
+
+int optee_enumerate_devices(void)
+{
+	uuid_t pta_uuid =
+		UUID_INIT(0x7011a688, 0xddde, 0x4053,
+			  0xa5, 0xa9, 0x7b, 0x3c, 0x4d, 0xdf, 0x13, 0xb8);
+	struct tee_ioctl_open_session_arg sess_arg = {0};
+	struct tee_shm *device_shm = NULL;
+	uuid_t *device_uuid = NULL;
+	struct tee_context *ctx = NULL;
+	u32 shm_size = 0, idx = 0;
+	int rc;
+
+	/* Open context with OP-TEE driver */
+	ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
+	if (IS_ERR(ctx))
+		return -ENODEV;
+
+	/* Open session with device enumeration pseudo TA */
+	memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN);
+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+	sess_arg.num_params = 0;
+
+	rc = tee_client_open_session(ctx, &sess_arg, NULL);
+	if ((rc < 0) || (sess_arg.ret != TEEC_SUCCESS)) {
+		/* Device enumeration pseudo TA not found */
+		rc = 0;
+		goto out_ctx;
+	}
+
+	rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
+	if (rc < 0)
+		goto out_sess;
+
+	device_shm = tee_shm_alloc(ctx, shm_size,
+				   TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+	if (IS_ERR(device_shm)) {
+		pr_err("tee_shm_alloc failed\n");
+		rc = PTR_ERR(device_shm);
+		goto out_sess;
+	}
+
+	rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
+	if (rc < 0)
+		goto out_shm;
+
+	device_uuid = tee_shm_get_va(device_shm, 0);
+	if (IS_ERR(device_uuid)) {
+		pr_err("tee_shm_get_va failed\n");
+		rc = PTR_ERR(device_uuid);
+		goto out_shm;
+	}
+
+	while (idx < shm_size / sizeof(uuid_t)) {
+		rc = optee_register_device(&device_uuid[idx], idx);
+		if (rc)
+			goto out_shm;
+		idx++;
+	}
+
+out_shm:
+	tee_shm_free(device_shm);
+out_sess:
+	tee_client_close_session(ctx, sess_arg.session);
+out_ctx:
+	tee_client_close_context(ctx);
+
+	return rc;
+}
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 35e7938..a5e84af 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -28,6 +28,7 @@ 
 #define TEEC_ERROR_BAD_PARAMETERS	0xFFFF0006
 #define TEEC_ERROR_COMMUNICATION	0xFFFF000E
 #define TEEC_ERROR_OUT_OF_MEMORY	0xFFFF000C
+#define TEEC_ERROR_SHORT_BUFFER		0xFFFF0010
 
 #define TEEC_ORIGIN_COMMS		0x00000002
 
@@ -181,6 +182,8 @@  void optee_free_pages_list(void *array, size_t num_entries);
 void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
 			   size_t page_offset);
 
+int optee_enumerate_devices(void);
+
 /*
  * Small helpers
  */