| Message ID | 1547743097-5236-3-git-send-email-schaecsn@gmx.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for the Aspeed AST2500 SoC EDAC driver | expand |
On Fri, 18 Jan 2019, at 03:08, Stefan Schaeckeler wrote: > From: Stefan M Schaeckeler <sschaeck@cisco.com> > > Add support for EDAC on the Aspeed AST2500 SoC. > > Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > --- > .../bindings/edac/aspeed-sdram-edac.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt > > diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram- > edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt > new file mode 100644 > index 000000000000..6a0f3d90d682 > --- /dev/null > +++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt > @@ -0,0 +1,25 @@ > +Aspeed AST2500 SoC EDAC node > + > +The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without > ECC (error > +correction check). > + > +The memory controller supports SECDED (single bit error correction, > double bit > +error detection) and single bit error auto scrubbing by reserving 8 > bits for > +every 64 bit word (effectively reducing available memory to 8/9). > + > +Note, the bootloader must configure ECC mode in the memory controller. > + > + > +Required properties: > +- compatible: should be "aspeed,ast2500-sdram-edac" > +- reg: sdram controller register set should be <0x1e6e0000 > 0x174> > +- interrupts: should be AVIC interrupt #0 > + > + > +Example: > + > + edac: sdram@1e6e0000 { > + compatible = "aspeed,ast2500-sdram-edac"; > + reg = <0x1e6e0000 0x174>; > + interrupts = <0>; > + }; > -- > 2.19.1 >
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt new file mode 100644 index 000000000000..6a0f3d90d682 --- /dev/null +++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt @@ -0,0 +1,25 @@ +Aspeed AST2500 SoC EDAC node + +The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error +correction check). + +The memory controller supports SECDED (single bit error correction, double bit +error detection) and single bit error auto scrubbing by reserving 8 bits for +every 64 bit word (effectively reducing available memory to 8/9). + +Note, the bootloader must configure ECC mode in the memory controller. + + +Required properties: +- compatible: should be "aspeed,ast2500-sdram-edac" +- reg: sdram controller register set should be <0x1e6e0000 0x174> +- interrupts: should be AVIC interrupt #0 + + +Example: + + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + };